Skip to content

Elvar Liiv / drive_controller_iseauto

Go to a project
Commit f147a242 by Elvar Liiv
Options

a

parent de06732a
Inline Side-by-side
Showing with 38921 additions and 1 deletions
drive_controller @ bc1f235f
Subproject commit bc1f235f7e81eded9365500e20e66283dc636cf4
stmf4discoveryRTOS-SW/.cproject 0 → 100644
<?xml version="1.0" encoding="UTF-8"?>
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
<storageModule moduleId="org.eclipse.cdt.core.settings">
<cconfiguration id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.64229782">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.64229782" moduleId="org.eclipse.cdt.core.settings" name="Debug">
<externalSettings />
<extensions>
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser" />
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser" />
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser" />
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser" />
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser" />
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser" />
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.64229782" name="Debug" parent="fr.ac6.managedbuild.config.gnu.cross.exe.debug" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary &quot;${BuildArtifactFileBaseName}.elf&quot; &quot;${BuildArtifactFileBaseName}.bin&quot; &amp;&amp; arm-none-eabi-size &quot;${BuildArtifactFileName}&quot;">
<folderInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.64229782." name="/" resourcePath="">
<toolChain id="fr.ac6.managedbuild.toolchain.gnu.cross.exe.debug.1091916518" name="Ac6 STM32 MCU GCC" superClass="fr.ac6.managedbuild.toolchain.gnu.cross.exe.debug">
<option id="fr.ac6.managedbuild.option.gnu.cross.prefix.1174629767" name="Prefix" superClass="fr.ac6.managedbuild.option.gnu.cross.prefix" useByScannerDiscovery="false" value="arm-none-eabi-" valueType="string" />
<option id="fr.ac6.managedbuild.option.gnu.cross.mcu.272370667" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" useByScannerDiscovery="false" value="STM32F407VGTx" valueType="string" />
<option id="fr.ac6.managedbuild.option.gnu.cross.board.308524458" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" useByScannerDiscovery="false" value="STM32F4DISCOVERY" valueType="string" />
<option id="fr.ac6.managedbuild.option.gnu.cross.instructionSet.2018748158" name="Instruction Set" superClass="fr.ac6.managedbuild.option.gnu.cross.instructionSet" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.instructionSet.thumbII" valueType="enumerated" />
<option id="fr.ac6.managedbuild.option.gnu.cross.fpu.220122125" name="Floating point hardware" superClass="fr.ac6.managedbuild.option.gnu.cross.fpu" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.fpu.fpv4-sp-d16" valueType="enumerated" />
<option id="fr.ac6.managedbuild.option.gnu.cross.floatabi.2001113235" name="Floating-point ABI" superClass="fr.ac6.managedbuild.option.gnu.cross.floatabi" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.floatabi.hard" valueType="enumerated" />
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="fr.ac6.managedbuild.targetPlatform.gnu.cross.2095417082" isAbstract="false" osList="all" superClass="fr.ac6.managedbuild.targetPlatform.gnu.cross" />
<builder buildPath="${workspace_loc:/stmf4discoveryRTOS-SW}/Debug" id="fr.ac6.managedbuild.builder.gnu.cross.145303244" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="fr.ac6.managedbuild.builder.gnu.cross">
<outputEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="outputPath" name="Debug" />
</outputEntries>
</builder>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.681408901" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler">
<option defaultValue="gnu.c.optimization.level.none" id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.46986424" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.debug" valueType="enumerated" />
<option id="gnu.c.compiler.option.debugging.level.261894815" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.max" valueType="enumerated" />
<option id="gnu.c.compiler.option.include.paths.1473279384" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath">
<listOptionValue builtIn="false" value="../Inc" />
<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc" />
<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy" />
<listOptionValue builtIn="false" value="../Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F" />
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F4xx/Include" />
<listOptionValue builtIn="false" value="../Middlewares/Third_Party/FreeRTOS/Source/include" />
<listOptionValue builtIn="false" value="../Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS" />
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include" />
<listOptionValue builtIn="false" value="../Inc" />
</option>
<option id="gnu.c.compiler.option.preprocessor.def.symbols.1789528089" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" useByScannerDiscovery="false" valueType="definedSymbols">
<listOptionValue builtIn="false" value="__weak=__attribute__((weak))" />
<listOptionValue builtIn="false" value="__packed=__attribute__((__packed__))" />
<listOptionValue builtIn="false" value="USE_HAL_DRIVER" />
<listOptionValue builtIn="false" value="STM32F407xx" />
</option>
<option id="fr.ac6.managedbuild.gnu.c.compiler.option.misc.other.2033484957" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.misc.other" useByScannerDiscovery="false" value="-fmessage-length=0" valueType="string" />
<option id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata.814416917" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata" useByScannerDiscovery="false" value="false" valueType="boolean" />
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.822872524" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c" />
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.1820325225" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s" />
</tool>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.2118441659" name="MCU G++ Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler">
<option id="gnu.cpp.compiler.option.optimization.level.2072023369" name="Optimization Level" superClass="gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.cpp.optimization.level.more" valueType="enumerated" />
<option id="gnu.cpp.compiler.option.debugging.level.1820790231" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated" />
</tool>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.50579637" name="MCU GCC Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker">
<option id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script.279078188" name="Linker Script (-T)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script" useByScannerDiscovery="false" value="../STM32F407VGTx_FLASH.ld" valueType="string" />
<option id="gnu.c.link.option.libs.942003775" name="Libraries (-l)" superClass="gnu.c.link.option.libs" useByScannerDiscovery="false" />
<option id="gnu.c.link.option.paths.1228636605" name="Library search path (-L)" superClass="gnu.c.link.option.paths" useByScannerDiscovery="false" />
<option id="gnu.c.link.option.ldflags.1550535005" name="Linker flags" superClass="gnu.c.link.option.ldflags" useByScannerDiscovery="false" value="-specs=nosys.specs -specs=nano.specs" valueType="string" />
<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1569937174" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)" />
<additionalInput kind="additionalinput" paths="$(LIBS)" />
</inputType>
</tool>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.1640587490" name="MCU G++ Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker" />
<tool id="fr.ac6.managedbuild.tool.gnu.archiver.1864858273" name="MCU GCC Archiver" superClass="fr.ac6.managedbuild.tool.gnu.archiver" />
<tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.608997923" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler">
<option id="gnu.both.asm.option.include.paths.910808841" name="Include paths (-I)" superClass="gnu.both.asm.option.include.paths" useByScannerDiscovery="false" />
<inputType id="cdt.managedbuild.tool.gnu.assembler.input.747181508" superClass="cdt.managedbuild.tool.gnu.assembler.input" />
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.189658964" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input" />
</tool>
</toolChain>
</folderInfo>
<sourceEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="startup" />
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Middlewares" />
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers" />
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Src" />
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Inc" />
</sourceEntries>
</configuration>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings" />
</cconfiguration>
<cconfiguration id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1214703523">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1214703523" moduleId="org.eclipse.cdt.core.settings" name="Release">
<externalSettings />
<extensions>
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser" />
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser" />
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser" />
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser" />
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser" />
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser" />
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1214703523" name="Release" parent="fr.ac6.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary &quot;${BuildArtifactFileBaseName}.elf&quot; &quot;${BuildArtifactFileBaseName}.bin&quot; &amp;&amp; arm-none-eabi-size &quot;${BuildArtifactFileName}&quot;">
<folderInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1214703523." name="/" resourcePath="">
<toolChain id="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release.324669123" name="Ac6 STM32 MCU GCC" superClass="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release">
<option id="fr.ac6.managedbuild.option.gnu.cross.prefix.1174629767" name="Prefix" superClass="fr.ac6.managedbuild.option.gnu.cross.prefix" value="arm-none-eabi-" valueType="string" />
<option id="fr.ac6.managedbuild.option.gnu.cross.mcu.272370667" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" value="STM32F407VGTx" valueType="string" />
<option id="fr.ac6.managedbuild.option.gnu.cross.board.308524458" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" value="STM32F4DISCOVERY" valueType="string" />
<option id="fr.ac6.managedbuild.option.gnu.cross.instructionSet.2018748158" name="Instruction Set" superClass="fr.ac6.managedbuild.option.gnu.cross.instructionSet" value="fr.ac6.managedbuild.option.gnu.cross.instructionSet.thumbII" valueType="enumerated" />
<option id="fr.ac6.managedbuild.option.gnu.cross.fpu.220122125" name="Floating point hardware" superClass="fr.ac6.managedbuild.option.gnu.cross.fpu" value="fr.ac6.managedbuild.option.gnu.cross.fpu.fpv4-sp-d16" valueType="enumerated" />
<option id="fr.ac6.managedbuild.option.gnu.cross.floatabi.2001113235" name="Floating-point ABI" superClass="fr.ac6.managedbuild.option.gnu.cross.floatabi" value="fr.ac6.managedbuild.option.gnu.cross.floatabi.hard" valueType="enumerated" />
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="fr.ac6.managedbuild.targetPlatform.gnu.cross.2095417082" isAbstract="false" osList="all" superClass="fr.ac6.managedbuild.targetPlatform.gnu.cross" />
<builder buildPath="${workspace_loc:/stmf4discoveryRTOS-SW}/Release" id="fr.ac6.managedbuild.builder.gnu.cross.145303244" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="fr.ac6.managedbuild.builder.gnu.cross">
<outputEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="outputPath" name="Release" />
</outputEntries>
</builder>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.681408901" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler">
<option defaultValue="gnu.c.optimization.level.none" id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.46986424" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.debug" valueType="enumerated" />
<option id="gnu.c.compiler.option.debugging.level.261894815" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.max" valueType="enumerated" />
<option id="gnu.c.compiler.option.include.paths.1473279384" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath">
<listOptionValue builtIn="false" value="../Inc" />
<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc" />
<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy" />
<listOptionValue builtIn="false" value="../Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F" />
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F4xx/Include" />
<listOptionValue builtIn="false" value="../Middlewares/Third_Party/FreeRTOS/Source/include" />
<listOptionValue builtIn="false" value="../Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS" />
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include" />
<listOptionValue builtIn="false" value="../Inc" />
</option>
<option id="gnu.c.compiler.option.preprocessor.def.symbols.1789528089" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" useByScannerDiscovery="false" valueType="definedSymbols">
<listOptionValue builtIn="false" value="__weak=__attribute__((weak))" />
<listOptionValue builtIn="false" value="__packed=__attribute__((__packed__))" />
<listOptionValue builtIn="false" value="USE_HAL_DRIVER" />
<listOptionValue builtIn="false" value="STM32F407xx" />
</option>
<option id="fr.ac6.managedbuild.gnu.c.compiler.option.misc.other.2033484957" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.misc.other" useByScannerDiscovery="false" value="-fmessage-length=0" valueType="string" />
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.822872524" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c" />
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.1820325225" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s" />
</tool>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.2118441659" name="MCU G++ Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler">
<option id="gnu.cpp.compiler.option.optimization.level.2072023369" name="Optimization Level" superClass="gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.cpp.optimization.level.more" valueType="enumerated" />
<option id="gnu.cpp.compiler.option.debugging.level.1820790231" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated" />
</tool>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.50579637" name="MCU GCC Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker">
<option id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script.279078188" name="Linker Script (-T)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script" value="../STM32F407VGTx_FLASH.ld" valueType="string" />
<option id="gnu.c.link.option.libs.942003775" name="Libraries (-l)" superClass="gnu.c.link.option.libs" />
<option id="gnu.c.link.option.paths.1228636605" name="Library search path (-L)" superClass="gnu.c.link.option.paths" />
<option id="gnu.c.link.option.ldflags.1550535005" name="Linker flags" superClass="gnu.c.link.option.ldflags" value="-specs=nosys.specs -specs=nano.specs" valueType="string" />
<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1569937174" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)" />
<additionalInput kind="additionalinput" paths="$(LIBS)" />
</inputType>
</tool>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.1640587490" name="MCU G++ Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker" />
<tool id="fr.ac6.managedbuild.tool.gnu.archiver.1864858273" name="MCU GCC Archiver" superClass="fr.ac6.managedbuild.tool.gnu.archiver" />
<tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.608997923" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler">
<option id="gnu.both.asm.option.include.paths.910808841" name="Include paths (-I)" superClass="gnu.both.asm.option.include.paths" />
<inputType id="cdt.managedbuild.tool.gnu.assembler.input.747181508" superClass="cdt.managedbuild.tool.gnu.assembler.input" />
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.189658964" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input" />
</tool>
<tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.exe.release.1865885755" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.exe.release">
<inputType id="cdt.managedbuild.tool.gnu.assembler.input.544456328" superClass="cdt.managedbuild.tool.gnu.assembler.input" />
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.1514209414" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input" />
</tool>
</toolChain>
</folderInfo>
<sourceEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="startup" />
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Middlewares" />
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers" />
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Src" />
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Inc" />
</sourceEntries>
</configuration>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings" />
</cconfiguration>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<project id="stmf4discoveryRTOS-SW.fr.ac6.managedbuild.target.gnu.cross.exe.1179893420" name="Executable" projectType="fr.ac6.managedbuild.target.gnu.cross.exe" />
</storageModule>
<storageModule moduleId="scannerConfiguration">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="" />
<scannerConfigBuildInfo instanceId="fr.ac6.managedbuild.config.gnu.cross.exe.debug.64229782;fr.ac6.managedbuild.config.gnu.cross.exe.debug.64229782.;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.681408901;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.822872524">
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId="" />
</scannerConfigBuildInfo>
<!--scannerConfigBuildInfo instanceId="fr.ac6.managedbuild.config.gnu.cross.exe.release.$(RELEASE_CONFIG_UID);fr.ac6.managedbuild.config.gnu.cross.exe.release.$(RELEASE_CONFIG_UID).;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.$(RELEASE_TOOL_COMPILER_UID);cdt.managedbuild.tool.gnu.c.compiler.input.$(RELEASE_TOOL_COMPILER_INPUT_UID)">
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
</scannerConfigBuildInfo-->
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders" />
<storageModule moduleId="refreshScope" versionNumber="2">
<configuration configurationName="Debug">
<resource resourceType="PROJECT" workspacePath="stmf4discoveryRTOS-SW" />
</configuration>
<configuration configurationName="Release" />
</storageModule>
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets" />
<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings" />
</cproject>
stmf4discoveryRTOS-SW/.mxproject 0 → 100644
[PreviousGenFiles]
HeaderPath=C:/Users/Nutikodu/git/drive_controller/STM32workspace/stmf4discoveryRTOS-SW/Inc
HeaderFiles=gpio.h;can.h;dac.h;FreeRTOSConfig.h;stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h;i2c.h;spi.h;adc.h;tim.h;usart.h;
SourcePath=C:/Users/Nutikodu/git/drive_controller/STM32workspace/stmf4discoveryRTOS-SW/Src
SourceFiles=gpio.c;can.c;dac.c;freertos.c;stm32f4xx_it.c;stm32f4xx_hal_msp.c;stm32f4xx_hal_timebase_TIM.c;main.c;i2c.c;spi.c;adc.c;tim.c;usart.c;
[PreviousLibFiles]
LibFiles=Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/portmacro.h;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h;Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h;Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h;Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h;Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOSConfig_template.h;Middlewares/Third_Party/FreeRTOS/Source/include/list.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h;Middlewares/Third_Party/FreeRTOS/Source/include/portable.h;Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h;Middlewares/Third_Party/FreeRTOS/Source/include/queue.h;Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h;Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h;Middlewares/Third_Party/FreeRTOS/Source/include/task.h;Middlewares/Third_Party/FreeRTOS/Source/include/timers.h;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
[PreviousUsedSW4STM32Files]
SourceFiles=..\Src\main.c;..\Src\gpio.c;..\Src\adc.c;..\Src\can.c;..\Src\dac.c;..\Src\freertos.c;..\Src\tim.c;..\Src\usart.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;..\Src\stm32f4xx_hal_timebase_TIM.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;../Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;../Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c;../Middlewares/Third_Party/FreeRTOS/Source/croutine.c;../Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;../Middlewares/Third_Party/FreeRTOS/Source/list.c;../Middlewares/Third_Party/FreeRTOS/Source/queue.c;../Middlewares/Third_Party/FreeRTOS/Source/tasks.c;../Middlewares/Third_Party/FreeRTOS/Source/timers.c;../Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;../Src/system_stm32f4xx.c;../Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;../Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f407xx.s;../Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;../Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c;../Middlewares/Third_Party/FreeRTOS/Source/croutine.c;../Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;../Middlewares/Third_Party/FreeRTOS/Source/list.c;../Middlewares/Third_Party/FreeRTOS/Source/queue.c;../Middlewares/Third_Party/FreeRTOS/Source/tasks.c;../Middlewares/Third_Party/FreeRTOS/Source/timers.c;../Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;
HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Middlewares\Third_Party\FreeRTOS\Source\include;..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS;..\Drivers\CMSIS\Include;..\Inc;
CDefines=__weak:__attribute__((weak));__packed:__attribute__((__packed__));
stmf4discoveryRTOS-SW/.project 0 → 100644
<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
<name>stmf4discoveryRTOS-SW</name>
<comment />
<projects>
</projects>
<buildSpec>
<buildCommand>
<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
<triggers>clean,full,incremental,</triggers>
<arguments>
</arguments>
</buildCommand>
<buildCommand>
<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
<triggers>full,incremental,</triggers>
<arguments>
</arguments>
</buildCommand>
</buildSpec>
<natures>
<nature>org.eclipse.cdt.core.cnature</nature>
<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
<nature>fr.ac6.mcu.ide.core.MCUProjectNature</nature>
</natures>
<linkedResources>
</linkedResources>
</projectDescription>
stmf4discoveryRTOS-SW/.settings/language.settings.xml 0 → 100644
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<project>
<configuration id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.64229782" name="Debug">
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider class="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" console="false" env-hash="-307593541477099676" id="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="Ac6 SW4 STM32 MCU Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/>
</provider>
</extension>
</configuration>
<configuration id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1214703523" name="Release">
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider class="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" console="false" env-hash="-307593541477099676" id="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="Ac6 SW4 STM32 MCU Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/>
</provider>
</extension>
</configuration>
</project>
stmf4discoveryRTOS-SW/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
stmf4discoveryRTOS-SW/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx.h
* @author MCD Application Team
* @brief CMSIS STM32F4xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
* is using in the C source code, usually in main.c. This file contains:
* - Configuration section that allows to select:
* - The STM32F4xx device used in the target application
* - To use or not the peripheral’s drivers in application code(i.e.
* code will be based on direct access to peripheral’s registers
* rather than drivers API), this option is controlled by
* "#define USE_HAL_DRIVER"
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f4xx
* @{
*/
#ifndef __STM32F4xx_H
#define __STM32F4xx_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @{
*/
/**
* @brief STM32 Family
*/
#if !defined (STM32F4)
#define STM32F4
#endif /* STM32F4 */
/* Uncomment the line below according to the target STM32 device used in your
application
*/
#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
!defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
!defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F410Tx) && !defined (STM32F410Cx) && \
!defined (STM32F410Rx) && !defined (STM32F411xE) && !defined (STM32F446xx) && !defined (STM32F469xx) && \
!defined (STM32F479xx) && !defined (STM32F412Cx) && !defined (STM32F412Rx) && !defined (STM32F412Vx) && \
!defined (STM32F412Zx) && !defined (STM32F413xx) && !defined (STM32F423xx)
/* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
/* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
/* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
/* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
/* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
/* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
/* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
STM32F439NI, STM32F429IG and STM32F429II Devices */
/* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
STM32F439NI, STM32F439IG and STM32F439II Devices */
/* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
/* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
/* #define STM32F410Tx */ /*!< STM32F410T8 and STM32F410TB Devices */
/* #define STM32F410Cx */ /*!< STM32F410C8 and STM32F410CB Devices */
/* #define STM32F410Rx */ /*!< STM32F410R8 and STM32F410RB Devices */
/* #define STM32F411xE */ /*!< STM32F411CC, STM32F411RC, STM32F411VC, STM32F411CE, STM32F411RE and STM32F411VE Devices */
/* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC,
and STM32F446ZE Devices */
/* #define STM32F469xx */ /*!< STM32F469AI, STM32F469II, STM32F469BI, STM32F469NI, STM32F469AG, STM32F469IG, STM32F469BG,
STM32F469NG, STM32F469AE, STM32F469IE, STM32F469BE and STM32F469NE Devices */
/* #define STM32F479xx */ /*!< STM32F479AI, STM32F479II, STM32F479BI, STM32F479NI, STM32F479AG, STM32F479IG, STM32F479BG
and STM32F479NG Devices */
/* #define STM32F412Cx */ /*!< STM32F412CEU and STM32F412CGU Devices */
/* #define STM32F412Zx */ /*!< STM32F412ZET, STM32F412ZGT, STM32F412ZEJ and STM32F412ZGJ Devices */
/* #define STM32F412Vx */ /*!< STM32F412VET, STM32F412VGT, STM32F412VEH and STM32F412VGH Devices */
/* #define STM32F412Rx */ /*!< STM32F412RET, STM32F412RGT, STM32F412REY and STM32F412RGY Devices */
/* #define STM32F413xx */ /*!< STM32F413CH, STM32F413MH, STM32F413RH, STM32F413VH, STM32F413ZH, STM32F413CG, STM32F413MG,
STM32F413RG, STM32F413VG and STM32F413ZG Devices */
/* #define STM32F423xx */ /*!< STM32F423CH, STM32F423RH, STM32F423VH and STM32F423ZH Devices */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
*/
#if !defined (USE_HAL_DRIVER)
/**
* @brief Comment the line below if you will not use the peripherals drivers.
In this case, these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
/*#define USE_HAL_DRIVER */
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS version number V2.6.2
*/
#define __STM32F4xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */
#define __STM32F4xx_CMSIS_VERSION_SUB1 (0x06U) /*!< [23:16] sub1 version */
#define __STM32F4xx_CMSIS_VERSION_SUB2 (0x02U) /*!< [15:8] sub2 version */
#define __STM32F4xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define __STM32F4xx_CMSIS_VERSION ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\
|(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\
|(__STM32F4xx_CMSIS_VERSION_SUB2 << 8 )\
|(__STM32F4xx_CMSIS_VERSION))
/**
* @}
*/
/** @addtogroup Device_Included
* @{
*/
#if defined(STM32F405xx)
#include "stm32f405xx.h"
#elif defined(STM32F415xx)
#include "stm32f415xx.h"
#elif defined(STM32F407xx)
#include "stm32f407xx.h"
#elif defined(STM32F417xx)
#include "stm32f417xx.h"
#elif defined(STM32F427xx)
#include "stm32f427xx.h"
#elif defined(STM32F437xx)
#include "stm32f437xx.h"
#elif defined(STM32F429xx)
#include "stm32f429xx.h"
#elif defined(STM32F439xx)
#include "stm32f439xx.h"
#elif defined(STM32F401xC)
#include "stm32f401xc.h"
#elif defined(STM32F401xE)
#include "stm32f401xe.h"
#elif defined(STM32F410Tx)
#include "stm32f410tx.h"
#elif defined(STM32F410Cx)
#include "stm32f410cx.h"
#elif defined(STM32F410Rx)
#include "stm32f410rx.h"
#elif defined(STM32F411xE)
#include "stm32f411xe.h"
#elif defined(STM32F446xx)
#include "stm32f446xx.h"
#elif defined(STM32F469xx)
#include "stm32f469xx.h"
#elif defined(STM32F479xx)
#include "stm32f479xx.h"
#elif defined(STM32F412Cx)
#include "stm32f412cx.h"
#elif defined(STM32F412Zx)
#include "stm32f412zx.h"
#elif defined(STM32F412Rx)
#include "stm32f412rx.h"
#elif defined(STM32F412Vx)
#include "stm32f412vx.h"
#elif defined(STM32F413xx)
#include "stm32f413xx.h"
#elif defined(STM32F423xx)
#include "stm32f423xx.h"
#else
#error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
#endif
/**
* @}
*/
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
RESET = 0U,
SET = !RESET
} FlagStatus, ITStatus;
typedef enum
{
DISABLE = 0U,
ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
ERROR = 0U,
SUCCESS = !ERROR
} ErrorStatus;
/**
* @}
*/
/** @addtogroup Exported_macro
* @{
*/
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
#define READ_BIT(REG, BIT) ((REG) & (BIT))
#define CLEAR_REG(REG) ((REG) = (0x0))
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
#define READ_REG(REG) ((REG))
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
/**
* @}
*/
#if defined (USE_HAL_DRIVER)
#include "stm32f4xx_hal.h"
#endif /* USE_HAL_DRIVER */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __STM32F4xx_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h 0 → 100644
/**
******************************************************************************
* @file system_stm32f4xx.h
* @author MCD Application Team
* @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f4xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef __SYSTEM_STM32F4XX_H
#define __SYSTEM_STM32F4XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32F4xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Exported_types
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__SYSTEM_STM32F4XX_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/arm_common_tables.h 0 → 100644
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. October 2015
* $Revision: V.1.4.5 a
*
* Project: CMSIS DSP Library
* Title: arm_common_tables.h
*
* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#ifndef _ARM_COMMON_TABLES_H
#define _ARM_COMMON_TABLES_H
#include "arm_math.h"
extern const uint16_t armBitRevTable[1024];
extern const q15_t armRecipTableQ15[64];
extern const q31_t armRecipTableQ31[64];
/* extern const q31_t realCoefAQ31[1024]; */
/* extern const q31_t realCoefBQ31[1024]; */
extern const float32_t twiddleCoef_16[32];
extern const float32_t twiddleCoef_32[64];
extern const float32_t twiddleCoef_64[128];
extern const float32_t twiddleCoef_128[256];
extern const float32_t twiddleCoef_256[512];
extern const float32_t twiddleCoef_512[1024];
extern const float32_t twiddleCoef_1024[2048];
extern const float32_t twiddleCoef_2048[4096];
extern const float32_t twiddleCoef_4096[8192];
#define twiddleCoef twiddleCoef_4096
extern const q31_t twiddleCoef_16_q31[24];
extern const q31_t twiddleCoef_32_q31[48];
extern const q31_t twiddleCoef_64_q31[96];
extern const q31_t twiddleCoef_128_q31[192];
extern const q31_t twiddleCoef_256_q31[384];
extern const q31_t twiddleCoef_512_q31[768];
extern const q31_t twiddleCoef_1024_q31[1536];
extern const q31_t twiddleCoef_2048_q31[3072];
extern const q31_t twiddleCoef_4096_q31[6144];
extern const q15_t twiddleCoef_16_q15[24];
extern const q15_t twiddleCoef_32_q15[48];
extern const q15_t twiddleCoef_64_q15[96];
extern const q15_t twiddleCoef_128_q15[192];
extern const q15_t twiddleCoef_256_q15[384];
extern const q15_t twiddleCoef_512_q15[768];
extern const q15_t twiddleCoef_1024_q15[1536];
extern const q15_t twiddleCoef_2048_q15[3072];
extern const q15_t twiddleCoef_4096_q15[6144];
extern const float32_t twiddleCoef_rfft_32[32];
extern const float32_t twiddleCoef_rfft_64[64];
extern const float32_t twiddleCoef_rfft_128[128];
extern const float32_t twiddleCoef_rfft_256[256];
extern const float32_t twiddleCoef_rfft_512[512];
extern const float32_t twiddleCoef_rfft_1024[1024];
extern const float32_t twiddleCoef_rfft_2048[2048];
extern const float32_t twiddleCoef_rfft_4096[4096];
/* floating-point bit reversal tables */
#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 )
#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 )
#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 )
#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
/* fixed-point bit reversal tables */
#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 )
#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 )
#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 )
#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
/* Tables for Fast Math Sine and Cosine */
extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
#endif /* ARM_COMMON_TABLES_H */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/arm_const_structs.h 0 → 100644
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_const_structs.h
*
* Description: This file has constant structs that are initialized for
* user convenience. For example, some can be given as
* arguments to the arm_cfft_f32() function.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#ifndef _ARM_CONST_STRUCTS_H
#define _ARM_CONST_STRUCTS_H
#include "arm_math.h"
#include "arm_common_tables.h"
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
#endif
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/arm_math.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/cmsis_armcc.h 0 → 100644
/**************************************************************************//**
* @file cmsis_armcc.h
* @brief CMSIS Cortex-M Core Function/Instruction Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#ifndef __CMSIS_ARMCC_H
#define __CMSIS_ARMCC_H
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
#error "Please use ARM Compiler Toolchain V4.0.677 or later!"
#endif
/* ########################### Core Function Access ########################### */
/** \ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
@{
*/
/* intrinsic void __enable_irq(); */
/* intrinsic void __disable_irq(); */
/**
\brief Get Control Register
\details Returns the content of the Control Register.
\return Control Register value
*/
__STATIC_INLINE uint32_t __get_CONTROL(void)
{
register uint32_t __regControl __ASM("control");
return(__regControl);
}
/**
\brief Set Control Register
\details Writes the given value to the Control Register.
\param [in] control Control Register value to set
*/
__STATIC_INLINE void __set_CONTROL(uint32_t control)
{
register uint32_t __regControl __ASM("control");
__regControl = control;
}
/**
\brief Get IPSR Register
\details Returns the content of the IPSR Register.
\return IPSR Register value
*/
__STATIC_INLINE uint32_t __get_IPSR(void)
{
register uint32_t __regIPSR __ASM("ipsr");
return(__regIPSR);
}
/**
\brief Get APSR Register
\details Returns the content of the APSR Register.
\return APSR Register value
*/
__STATIC_INLINE uint32_t __get_APSR(void)
{
register uint32_t __regAPSR __ASM("apsr");
return(__regAPSR);
}
/**
\brief Get xPSR Register
\details Returns the content of the xPSR Register.
\return xPSR Register value
*/
__STATIC_INLINE uint32_t __get_xPSR(void)
{
register uint32_t __regXPSR __ASM("xpsr");
return(__regXPSR);
}
/**
\brief Get Process Stack Pointer
\details Returns the current value of the Process Stack Pointer (PSP).
\return PSP Register value
*/
__STATIC_INLINE uint32_t __get_PSP(void)
{
register uint32_t __regProcessStackPointer __ASM("psp");
return(__regProcessStackPointer);
}
/**
\brief Set Process Stack Pointer
\details Assigns the given value to the Process Stack Pointer (PSP).
\param [in] topOfProcStack Process Stack Pointer value to set
*/
__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
{
register uint32_t __regProcessStackPointer __ASM("psp");
__regProcessStackPointer = topOfProcStack;
}
/**
\brief Get Main Stack Pointer
\details Returns the current value of the Main Stack Pointer (MSP).
\return MSP Register value
*/
__STATIC_INLINE uint32_t __get_MSP(void)
{
register uint32_t __regMainStackPointer __ASM("msp");
return(__regMainStackPointer);
}
/**
\brief Set Main Stack Pointer
\details Assigns the given value to the Main Stack Pointer (MSP).
\param [in] topOfMainStack Main Stack Pointer value to set
*/
__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
{
register uint32_t __regMainStackPointer __ASM("msp");
__regMainStackPointer = topOfMainStack;
}
/**
\brief Get Priority Mask
\details Returns the current state of the priority mask bit from the Priority Mask Register.
\return Priority Mask value
*/
__STATIC_INLINE uint32_t __get_PRIMASK(void)
{
register uint32_t __regPriMask __ASM("primask");
return(__regPriMask);
}
/**
\brief Set Priority Mask
\details Assigns the given value to the Priority Mask Register.
\param [in] priMask Priority Mask
*/
__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
{
register uint32_t __regPriMask __ASM("primask");
__regPriMask = (priMask);
}
#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
/**
\brief Enable FIQ
\details Enables FIQ interrupts by clearing the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
#define __enable_fault_irq __enable_fiq
/**
\brief Disable FIQ
\details Disables FIQ interrupts by setting the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
#define __disable_fault_irq __disable_fiq
/**
\brief Get Base Priority
\details Returns the current value of the Base Priority register.
\return Base Priority register value
*/
__STATIC_INLINE uint32_t __get_BASEPRI(void)
{
register uint32_t __regBasePri __ASM("basepri");
return(__regBasePri);
}
/**
\brief Set Base Priority
\details Assigns the given value to the Base Priority register.
\param [in] basePri Base Priority value to set
*/
__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
{
register uint32_t __regBasePri __ASM("basepri");
__regBasePri = (basePri & 0xFFU);
}
/**
\brief Set Base Priority with condition
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
or the new value increases the BASEPRI priority level.
\param [in] basePri Base Priority value to set
*/
__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
{
register uint32_t __regBasePriMax __ASM("basepri_max");
__regBasePriMax = (basePri & 0xFFU);
}
/**
\brief Get Fault Mask
\details Returns the current value of the Fault Mask register.
\return Fault Mask register value
*/
__STATIC_INLINE uint32_t __get_FAULTMASK(void)
{
register uint32_t __regFaultMask __ASM("faultmask");
return(__regFaultMask);
}
/**
\brief Set Fault Mask
\details Assigns the given value to the Fault Mask register.
\param [in] faultMask Fault Mask value to set
*/
__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
{
register uint32_t __regFaultMask __ASM("faultmask");
__regFaultMask = (faultMask & (uint32_t)1);
}
#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
/**
\brief Get FPSCR
\details Returns the current value of the Floating Point Status/Control register.
\return Floating Point Status/Control register value
*/
__STATIC_INLINE uint32_t __get_FPSCR(void)
{
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
register uint32_t __regfpscr __ASM("fpscr");
return(__regfpscr);
#else
return(0U);
#endif
}
/**
\brief Set FPSCR
\details Assigns the given value to the Floating Point Status/Control register.
\param [in] fpscr Floating Point Status/Control value to set
*/
__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
{
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
register uint32_t __regfpscr __ASM("fpscr");
__regfpscr = (fpscr);
#endif
}
#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
/*@} end of CMSIS_Core_RegAccFunctions */
/* ########################## Core Instruction Access ######################### */
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
Access to dedicated instructions
@{
*/
/**
\brief No Operation
\details No Operation does nothing. This instruction can be used for code alignment purposes.
*/
#define __NOP __nop
/**
\brief Wait For Interrupt
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
*/
#define __WFI __wfi
/**
\brief Wait For Event
\details Wait For Event is a hint instruction that permits the processor to enter
a low-power state until one of a number of events occurs.
*/
#define __WFE __wfe
/**
\brief Send Event
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
*/
#define __SEV __sev
/**
\brief Instruction Synchronization Barrier
\details Instruction Synchronization Barrier flushes the pipeline in the processor,
so that all instructions following the ISB are fetched from cache or memory,
after the instruction has been completed.
*/
#define __ISB() do {\
__schedule_barrier();\
__isb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Data Synchronization Barrier
\details Acts as a special kind of Data Memory Barrier.
It completes when all explicit memory accesses before this instruction complete.
*/
#define __DSB() do {\
__schedule_barrier();\
__dsb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Data Memory Barrier
\details Ensures the apparent order of the explicit memory operations before
and after the instruction, without ensuring their completion.
*/
#define __DMB() do {\
__schedule_barrier();\
__dmb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Reverse byte order (32 bit)
\details Reverses the byte order in integer value.
\param [in] value Value to reverse
\return Reversed value
*/
#define __REV __rev
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order in two unsigned short values.
\param [in] value Value to reverse
\return Reversed value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
{
rev16 r0, r0
bx lr
}
#endif
/**
\brief Reverse byte order in signed short value
\details Reverses the byte order in a signed short value with sign extension to integer.
\param [in] value Value to reverse
\return Reversed value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
{
revsh r0, r0
bx lr
}
#endif
/**
\brief Rotate Right in unsigned value (32 bit)
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
\param [in] value Value to rotate
\param [in] value Number of Bits to rotate
\return Rotated value
*/
#define __ROR __ror
/**
\brief Breakpoint
\details Causes the processor to enter Debug state.
Debug tools can use this to investigate system state when the instruction at a particular address is reached.
\param [in] value is ignored by the processor.
If required, a debugger can use it to store additional information about the breakpoint.
*/
#define __BKPT(value) __breakpoint(value)
/**
\brief Reverse bit order of value
\details Reverses the bit order of the given value.
\param [in] value Value to reverse
\return Reversed value
*/
#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
#define __RBIT __rbit
#else
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
{
uint32_t result;
int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
result = value; /* r will be reversed bits of v; first get LSB of v */
for (value >>= 1U; value; value >>= 1U)
{
result <<= 1U;
result |= value & 1U;
s--;
}
result <<= s; /* shift when v's highest bits are zero */
return(result);
}
#endif
/**
\brief Count leading zeros
\details Counts the number of leading zeros of a data value.
\param [in] value Value to count the leading zeros
\return number of leading zeros in value
*/
#define __CLZ __clz
#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
/**
\brief LDR Exclusive (8 bit)
\details Executes a exclusive LDR instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
#else
#define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief LDR Exclusive (16 bit)
\details Executes a exclusive LDR instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
#else
#define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief LDR Exclusive (32 bit)
\details Executes a exclusive LDR instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
#else
#define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief STR Exclusive (8 bit)
\details Executes a exclusive STR instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXB(value, ptr) __strex(value, ptr)
#else
#define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief STR Exclusive (16 bit)
\details Executes a exclusive STR instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXH(value, ptr) __strex(value, ptr)
#else
#define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief STR Exclusive (32 bit)
\details Executes a exclusive STR instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXW(value, ptr) __strex(value, ptr)
#else
#define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief Remove the exclusive lock
\details Removes the exclusive lock which is created by LDREX.
*/
#define __CLREX __clrex
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
#define __SSAT __ssat
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
#define __USAT __usat
/**
\brief Rotate Right with Extend (32 bit)
\details Moves each bit of a bitstring right by one bit.
The carry input is shifted in at the left end of the bitstring.
\param [in] value Value to rotate
\return Rotated value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
{
rrx r0, r0
bx lr
}
#endif
/**
\brief LDRT Unprivileged (8 bit)
\details Executes a Unprivileged LDRT instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
/**
\brief LDRT Unprivileged (16 bit)
\details Executes a Unprivileged LDRT instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
/**
\brief LDRT Unprivileged (32 bit)
\details Executes a Unprivileged LDRT instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
/**
\brief STRT Unprivileged (8 bit)
\details Executes a Unprivileged STRT instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRBT(value, ptr) __strt(value, ptr)
/**
\brief STRT Unprivileged (16 bit)
\details Executes a Unprivileged STRT instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRHT(value, ptr) __strt(value, ptr)
/**
\brief STRT Unprivileged (32 bit)
\details Executes a Unprivileged STRT instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRT(value, ptr) __strt(value, ptr)
#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
/* ################### Compiler specific Intrinsics ########################### */
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
Access to dedicated SIMD instructions
@{
*/
#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
#define __SADD8 __sadd8
#define __QADD8 __qadd8
#define __SHADD8 __shadd8
#define __UADD8 __uadd8
#define __UQADD8 __uqadd8
#define __UHADD8 __uhadd8
#define __SSUB8 __ssub8
#define __QSUB8 __qsub8
#define __SHSUB8 __shsub8
#define __USUB8 __usub8
#define __UQSUB8 __uqsub8
#define __UHSUB8 __uhsub8
#define __SADD16 __sadd16
#define __QADD16 __qadd16
#define __SHADD16 __shadd16
#define __UADD16 __uadd16
#define __UQADD16 __uqadd16
#define __UHADD16 __uhadd16
#define __SSUB16 __ssub16
#define __QSUB16 __qsub16
#define __SHSUB16 __shsub16
#define __USUB16 __usub16
#define __UQSUB16 __uqsub16
#define __UHSUB16 __uhsub16
#define __SASX __sasx
#define __QASX __qasx
#define __SHASX __shasx
#define __UASX __uasx
#define __UQASX __uqasx
#define __UHASX __uhasx
#define __SSAX __ssax
#define __QSAX __qsax
#define __SHSAX __shsax
#define __USAX __usax
#define __UQSAX __uqsax
#define __UHSAX __uhsax
#define __USAD8 __usad8
#define __USADA8 __usada8
#define __SSAT16 __ssat16
#define __USAT16 __usat16
#define __UXTB16 __uxtb16
#define __UXTAB16 __uxtab16
#define __SXTB16 __sxtb16
#define __SXTAB16 __sxtab16
#define __SMUAD __smuad
#define __SMUADX __smuadx
#define __SMLAD __smlad
#define __SMLADX __smladx
#define __SMLALD __smlald
#define __SMLALDX __smlaldx
#define __SMUSD __smusd
#define __SMUSDX __smusdx
#define __SMLSD __smlsd
#define __SMLSDX __smlsdx
#define __SMLSLD __smlsld
#define __SMLSLDX __smlsldx
#define __SEL __sel
#define __QADD __qadd
#define __QSUB __qsub
#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
((int64_t)(ARG3) << 32U) ) >> 32U))
#endif /* (__CORTEX_M >= 0x04) */
/*@} end of group CMSIS_SIMD_intrinsics */
#endif /* __CMSIS_ARMCC_H */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/cmsis_armcc_V6.h 0 → 100644
/**************************************************************************//**
* @file cmsis_armcc_V6.h
* @brief CMSIS Cortex-M Core Function/Instruction Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#ifndef __CMSIS_ARMCC_V6_H
#define __CMSIS_ARMCC_V6_H
/* ########################### Core Function Access ########################### */
/** \ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
@{
*/
/**
\brief Enable IRQ Interrupts
\details Enables IRQ interrupts by clearing the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void)
{
__ASM volatile ("cpsie i" : : : "memory");
}
/**
\brief Disable IRQ Interrupts
\details Disables IRQ interrupts by setting the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void)
{
__ASM volatile ("cpsid i" : : : "memory");
}
/**
\brief Get Control Register
\details Returns the content of the Control Register.
\return Control Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void)
{
uint32_t result;
__ASM volatile ("MRS %0, control" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get Control Register (non-secure)
\details Returns the content of the non-secure Control Register when in secure mode.
\return non-secure Control Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void)
{
uint32_t result;
__ASM volatile ("MRS %0, control_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Set Control Register
\details Writes the given value to the Control Register.
\param [in] control Control Register value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control)
{
__ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Set Control Register (non-secure)
\details Writes the given value to the non-secure Control Register when in secure state.
\param [in] control Control Register value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control)
{
__ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory");
}
#endif
/**
\brief Get IPSR Register
\details Returns the content of the IPSR Register.
\return IPSR Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void)
{
uint32_t result;
__ASM volatile ("MRS %0, ipsr" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get IPSR Register (non-secure)
\details Returns the content of the non-secure IPSR Register when in secure state.
\return IPSR Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void)
{
uint32_t result;
__ASM volatile ("MRS %0, ipsr_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Get APSR Register
\details Returns the content of the APSR Register.
\return APSR Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void)
{
uint32_t result;
__ASM volatile ("MRS %0, apsr" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get APSR Register (non-secure)
\details Returns the content of the non-secure APSR Register when in secure state.
\return APSR Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void)
{
uint32_t result;
__ASM volatile ("MRS %0, apsr_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Get xPSR Register
\details Returns the content of the xPSR Register.
\return xPSR Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void)
{
uint32_t result;
__ASM volatile ("MRS %0, xpsr" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get xPSR Register (non-secure)
\details Returns the content of the non-secure xPSR Register when in secure state.
\return xPSR Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void)
{
uint32_t result;
__ASM volatile ("MRS %0, xpsr_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Get Process Stack Pointer
\details Returns the current value of the Process Stack Pointer (PSP).
\return PSP Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, psp" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get Process Stack Pointer (non-secure)
\details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state.
\return PSP Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, psp_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Set Process Stack Pointer
\details Assigns the given value to the Process Stack Pointer (PSP).
\param [in] topOfProcStack Process Stack Pointer value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
{
__ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : "sp");
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Set Process Stack Pointer (non-secure)
\details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state.
\param [in] topOfProcStack Process Stack Pointer value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack)
{
__ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : "sp");
}
#endif
/**
\brief Get Main Stack Pointer
\details Returns the current value of the Main Stack Pointer (MSP).
\return MSP Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, msp" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get Main Stack Pointer (non-secure)
\details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state.
\return MSP Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, msp_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Set Main Stack Pointer
\details Assigns the given value to the Main Stack Pointer (MSP).
\param [in] topOfMainStack Main Stack Pointer value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
{
__ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : "sp");
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Set Main Stack Pointer (non-secure)
\details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state.
\param [in] topOfMainStack Main Stack Pointer value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack)
{
__ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : "sp");
}
#endif
/**
\brief Get Priority Mask
\details Returns the current state of the priority mask bit from the Priority Mask Register.
\return Priority Mask value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void)
{
uint32_t result;
__ASM volatile ("MRS %0, primask" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get Priority Mask (non-secure)
\details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state.
\return Priority Mask value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void)
{
uint32_t result;
__ASM volatile ("MRS %0, primask_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Set Priority Mask
\details Assigns the given value to the Priority Mask Register.
\param [in] priMask Priority Mask
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
{
__ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Set Priority Mask (non-secure)
\details Assigns the given value to the non-secure Priority Mask Register when in secure state.
\param [in] priMask Priority Mask
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask)
{
__ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory");
}
#endif
#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
/**
\brief Enable FIQ
\details Enables FIQ interrupts by clearing the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void)
{
__ASM volatile ("cpsie f" : : : "memory");
}
/**
\brief Disable FIQ
\details Disables FIQ interrupts by setting the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void)
{
__ASM volatile ("cpsid f" : : : "memory");
}
/**
\brief Get Base Priority
\details Returns the current value of the Base Priority register.
\return Base Priority register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void)
{
uint32_t result;
__ASM volatile ("MRS %0, basepri" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get Base Priority (non-secure)
\details Returns the current value of the non-secure Base Priority register when in secure state.
\return Base Priority register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void)
{
uint32_t result;
__ASM volatile ("MRS %0, basepri_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Set Base Priority
\details Assigns the given value to the Base Priority register.
\param [in] basePri Base Priority value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
{
__ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Set Base Priority (non-secure)
\details Assigns the given value to the non-secure Base Priority register when in secure state.
\param [in] basePri Base Priority value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value)
{
__ASM volatile ("MSR basepri_ns, %0" : : "r" (value) : "memory");
}
#endif
/**
\brief Set Base Priority with condition
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
or the new value increases the BASEPRI priority level.
\param [in] basePri Base Priority value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
{
__ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Set Base Priority with condition (non_secure)
\details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled,
or the new value increases the BASEPRI priority level.
\param [in] basePri Base Priority value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value)
{
__ASM volatile ("MSR basepri_max_ns, %0" : : "r" (value) : "memory");
}
#endif
/**
\brief Get Fault Mask
\details Returns the current value of the Fault Mask register.
\return Fault Mask register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
{
uint32_t result;
__ASM volatile ("MRS %0, faultmask" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get Fault Mask (non-secure)
\details Returns the current value of the non-secure Fault Mask register when in secure state.
\return Fault Mask register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void)
{
uint32_t result;
__ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Set Fault Mask
\details Assigns the given value to the Fault Mask register.
\param [in] faultMask Fault Mask value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
{
__ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
}
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Set Fault Mask (non-secure)
\details Assigns the given value to the non-secure Fault Mask register when in secure state.
\param [in] faultMask Fault Mask value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask)
{
__ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory");
}
#endif
#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
#if (__ARM_ARCH_8M__ == 1U)
/**
\brief Get Process Stack Pointer Limit
\details Returns the current value of the Process Stack Pointer Limit (PSPLIM).
\return PSPLIM Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, psplim" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
/**
\brief Get Process Stack Pointer Limit (non-secure)
\details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
\return PSPLIM Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, psplim_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Set Process Stack Pointer Limit
\details Assigns the given value to the Process Stack Pointer Limit (PSPLIM).
\param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit)
{
__ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit));
}
#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
/**
\brief Set Process Stack Pointer (non-secure)
\details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
\param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit)
{
__ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit));
}
#endif
/**
\brief Get Main Stack Pointer Limit
\details Returns the current value of the Main Stack Pointer Limit (MSPLIM).
\return MSPLIM Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, msplim" : "=r" (result) );
return(result);
}
#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
/**
\brief Get Main Stack Pointer Limit (non-secure)
\details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state.
\return MSPLIM Register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, msplim_ns" : "=r" (result) );
return(result);
}
#endif
/**
\brief Set Main Stack Pointer Limit
\details Assigns the given value to the Main Stack Pointer Limit (MSPLIM).
\param [in] MainStackPtrLimit Main Stack Pointer Limit value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit)
{
__ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit));
}
#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
/**
\brief Set Main Stack Pointer Limit (non-secure)
\details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state.
\param [in] MainStackPtrLimit Main Stack Pointer value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit)
{
__ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit));
}
#endif
#endif /* (__ARM_ARCH_8M__ == 1U) */
#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */
/**
\brief Get FPSCR
\details eturns the current value of the Floating Point Status/Control register.
\return Floating Point Status/Control register value
*/
#define __get_FPSCR __builtin_arm_get_fpscr
#if 0
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void)
{
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
uint32_t result;
__ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
__ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
__ASM volatile ("");
return(result);
#else
return(0);
#endif
}
#endif
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Get FPSCR (non-secure)
\details Returns the current value of the non-secure Floating Point Status/Control register when in secure state.
\return Floating Point Status/Control register value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void)
{
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
uint32_t result;
__ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
__ASM volatile ("VMRS %0, fpscr_ns" : "=r" (result) );
__ASM volatile ("");
return(result);
#else
return(0);
#endif
}
#endif
/**
\brief Set FPSCR
\details Assigns the given value to the Floating Point Status/Control register.
\param [in] fpscr Floating Point Status/Control value to set
*/
#define __set_FPSCR __builtin_arm_set_fpscr
#if 0
__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
{
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
__ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
__ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
__ASM volatile ("");
#endif
}
#endif
#if (__ARM_FEATURE_CMSE == 3U)
/**
\brief Set FPSCR (non-secure)
\details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state.
\param [in] fpscr Floating Point Status/Control value to set
*/
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr)
{
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
__ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
__ASM volatile ("VMSR fpscr_ns, %0" : : "r" (fpscr) : "vfpcc");
__ASM volatile ("");
#endif
}
#endif
#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
/*@} end of CMSIS_Core_RegAccFunctions */
/* ########################## Core Instruction Access ######################### */
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
Access to dedicated instructions
@{
*/
/* Define macros for porting to both thumb1 and thumb2.
* For thumb1, use low register (r0-r7), specified by constraint "l"
* Otherwise, use general registers, specified by constraint "r" */
#if defined (__thumb__) && !defined (__thumb2__)
#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
#define __CMSIS_GCC_USE_REG(r) "l" (r)
#else
#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
#define __CMSIS_GCC_USE_REG(r) "r" (r)
#endif
/**
\brief No Operation
\details No Operation does nothing. This instruction can be used for code alignment purposes.
*/
#define __NOP __builtin_arm_nop
/**
\brief Wait For Interrupt
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
*/
#define __WFI __builtin_arm_wfi
/**
\brief Wait For Event
\details Wait For Event is a hint instruction that permits the processor to enter
a low-power state until one of a number of events occurs.
*/
#define __WFE __builtin_arm_wfe
/**
\brief Send Event
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
*/
#define __SEV __builtin_arm_sev
/**
\brief Instruction Synchronization Barrier
\details Instruction Synchronization Barrier flushes the pipeline in the processor,
so that all instructions following the ISB are fetched from cache or memory,
after the instruction has been completed.
*/
#define __ISB() __builtin_arm_isb(0xF);
/**
\brief Data Synchronization Barrier
\details Acts as a special kind of Data Memory Barrier.
It completes when all explicit memory accesses before this instruction complete.
*/
#define __DSB() __builtin_arm_dsb(0xF);
/**
\brief Data Memory Barrier
\details Ensures the apparent order of the explicit memory operations before
and after the instruction, without ensuring their completion.
*/
#define __DMB() __builtin_arm_dmb(0xF);
/**
\brief Reverse byte order (32 bit)
\details Reverses the byte order in integer value.
\param [in] value Value to reverse
\return Reversed value
*/
#define __REV __builtin_bswap32
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order in two unsigned short values.
\param [in] value Value to reverse
\return Reversed value
*/
#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
#if 0
__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
{
uint32_t result;
__ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
return(result);
}
#endif
/**
\brief Reverse byte order in signed short value
\details Reverses the byte order in a signed short value with sign extension to integer.
\param [in] value Value to reverse
\return Reversed value
*/
/* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
{
int32_t result;
__ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
return(result);
}
/**
\brief Rotate Right in unsigned value (32 bit)
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
\param [in] op1 Value to rotate
\param [in] op2 Number of Bits to rotate
\return Rotated value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
{
return (op1 >> op2) | (op1 << (32U - op2));
}
/**
\brief Breakpoint
\details Causes the processor to enter Debug state.
Debug tools can use this to investigate system state when the instruction at a particular address is reached.
\param [in] value is ignored by the processor.
If required, a debugger can use it to store additional information about the breakpoint.
*/
#define __BKPT(value) __ASM volatile ("bkpt "#value)
/**
\brief Reverse bit order of value
\details Reverses the bit order of the given value.
\param [in] value Value to reverse
\return Reversed value
*/
/* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
{
uint32_t result;
#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
__ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
#else
int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
result = value; /* r will be reversed bits of v; first get LSB of v */
for (value >>= 1U; value; value >>= 1U)
{
result <<= 1U;
result |= value & 1U;
s--;
}
result <<= s; /* shift when v's highest bits are zero */
#endif
return(result);
}
/**
\brief Count leading zeros
\details Counts the number of leading zeros of a data value.
\param [in] value Value to count the leading zeros
\return number of leading zeros in value
*/
#define __CLZ __builtin_clz
#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
/**
\brief LDR Exclusive (8 bit)
\details Executes a exclusive LDR instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#define __LDREXB (uint8_t)__builtin_arm_ldrex
/**
\brief LDR Exclusive (16 bit)
\details Executes a exclusive LDR instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#define __LDREXH (uint16_t)__builtin_arm_ldrex
/**
\brief LDR Exclusive (32 bit)
\details Executes a exclusive LDR instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#define __LDREXW (uint32_t)__builtin_arm_ldrex
/**
\brief STR Exclusive (8 bit)
\details Executes a exclusive STR instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#define __STREXB (uint32_t)__builtin_arm_strex
/**
\brief STR Exclusive (16 bit)
\details Executes a exclusive STR instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#define __STREXH (uint32_t)__builtin_arm_strex
/**
\brief STR Exclusive (32 bit)
\details Executes a exclusive STR instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#define __STREXW (uint32_t)__builtin_arm_strex
/**
\brief Remove the exclusive lock
\details Removes the exclusive lock which is created by LDREX.
*/
#define __CLREX __builtin_arm_clrex
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
/*#define __SSAT __builtin_arm_ssat*/
#define __SSAT(ARG1,ARG2) \
({ \
int32_t __RES, __ARG1 = (ARG1); \
__ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
__RES; \
})
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
#define __USAT __builtin_arm_usat
#if 0
#define __USAT(ARG1,ARG2) \
({ \
uint32_t __RES, __ARG1 = (ARG1); \
__ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
__RES; \
})
#endif
/**
\brief Rotate Right with Extend (32 bit)
\details Moves each bit of a bitstring right by one bit.
The carry input is shifted in at the left end of the bitstring.
\param [in] value Value to rotate
\return Rotated value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
{
uint32_t result;
__ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
return(result);
}
/**
\brief LDRT Unprivileged (8 bit)
\details Executes a Unprivileged LDRT instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr)
{
uint32_t result;
__ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) );
return ((uint8_t) result); /* Add explicit type cast here */
}
/**
\brief LDRT Unprivileged (16 bit)
\details Executes a Unprivileged LDRT instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr)
{
uint32_t result;
__ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) );
return ((uint16_t) result); /* Add explicit type cast here */
}
/**
\brief LDRT Unprivileged (32 bit)
\details Executes a Unprivileged LDRT instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr)
{
uint32_t result;
__ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) );
return(result);
}
/**
\brief STRT Unprivileged (8 bit)
\details Executes a Unprivileged STRT instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr)
{
__ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
}
/**
\brief STRT Unprivileged (16 bit)
\details Executes a Unprivileged STRT instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr)
{
__ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
}
/**
\brief STRT Unprivileged (32 bit)
\details Executes a Unprivileged STRT instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr)
{
__ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) );
}
#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
#if (__ARM_ARCH_8M__ == 1U)
/**
\brief Load-Acquire (8 bit)
\details Executes a LDAB instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr)
{
uint32_t result;
__ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) );
return ((uint8_t) result);
}
/**
\brief Load-Acquire (16 bit)
\details Executes a LDAH instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr)
{
uint32_t result;
__ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) );
return ((uint16_t) result);
}
/**
\brief Load-Acquire (32 bit)
\details Executes a LDA instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr)
{
uint32_t result;
__ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) );
return(result);
}
/**
\brief Store-Release (8 bit)
\details Executes a STLB instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr)
{
__ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
}
/**
\brief Store-Release (16 bit)
\details Executes a STLH instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr)
{
__ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
}
/**
\brief Store-Release (32 bit)
\details Executes a STL instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr)
{
__ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
}
/**
\brief Load-Acquire Exclusive (8 bit)
\details Executes a LDAB exclusive instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#define __LDAEXB (uint8_t)__builtin_arm_ldaex
/**
\brief Load-Acquire Exclusive (16 bit)
\details Executes a LDAH exclusive instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#define __LDAEXH (uint16_t)__builtin_arm_ldaex
/**
\brief Load-Acquire Exclusive (32 bit)
\details Executes a LDA exclusive instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#define __LDAEX (uint32_t)__builtin_arm_ldaex
/**
\brief Store-Release Exclusive (8 bit)
\details Executes a STLB exclusive instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#define __STLEXB (uint32_t)__builtin_arm_stlex
/**
\brief Store-Release Exclusive (16 bit)
\details Executes a STLH exclusive instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#define __STLEXH (uint32_t)__builtin_arm_stlex
/**
\brief Store-Release Exclusive (32 bit)
\details Executes a STL exclusive instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#define __STLEX (uint32_t)__builtin_arm_stlex
#endif /* (__ARM_ARCH_8M__ == 1U) */
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
/* ################### Compiler specific Intrinsics ########################### */
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
Access to dedicated SIMD instructions
@{
*/
#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
#define __SSAT16(ARG1,ARG2) \
({ \
uint32_t __RES, __ARG1 = (ARG1); \
__ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
__RES; \
})
#define __USAT16(ARG1,ARG2) \
({ \
uint32_t __RES, __ARG1 = (ARG1); \
__ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
__RES; \
})
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
{
uint32_t result;
__ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
{
uint32_t result;
__ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
{
union llreg_u{
uint32_t w32[2];
uint64_t w64;
} llr;
llr.w64 = acc;
#ifndef __ARMEB__ /* Little endian */
__ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
#else /* Big endian */
__ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
#endif
return(llr.w64);
}
__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
{
union llreg_u{
uint32_t w32[2];
uint64_t w64;
} llr;
llr.w64 = acc;
#ifndef __ARMEB__ /* Little endian */
__ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
#else /* Big endian */
__ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
#endif
return(llr.w64);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
{
union llreg_u{
uint32_t w32[2];
uint64_t w64;
} llr;
llr.w64 = acc;
#ifndef __ARMEB__ /* Little endian */
__ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
#else /* Big endian */
__ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
#endif
return(llr.w64);
}
__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
{
union llreg_u{
uint32_t w32[2];
uint64_t w64;
} llr;
llr.w64 = acc;
#ifndef __ARMEB__ /* Little endian */
__ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
#else /* Big endian */
__ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
#endif
return(llr.w64);
}
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
{
int32_t result;
__ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
{
int32_t result;
__ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
#define __PKHBT(ARG1,ARG2,ARG3) \
({ \
uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
__ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
__RES; \
})
#define __PKHTB(ARG1,ARG2,ARG3) \
({ \
uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
if (ARG3 == 0) \
__ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
else \
__ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
__RES; \
})
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
{
int32_t result;
__ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
#endif /* (__ARM_FEATURE_DSP == 1U) */
/*@} end of group CMSIS_SIMD_intrinsics */
#endif /* __CMSIS_ARMCC_V6_H */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/cmsis_gcc.h 0 → 100644
/**************************************************************************//**
* @file cmsis_gcc.h
* @brief CMSIS Cortex-M Core Function/Instruction Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#ifndef __CMSIS_GCC_H
#define __CMSIS_GCC_H
/* ignore some GCC warnings */
#if defined ( __GNUC__ )
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wsign-conversion"
#pragma GCC diagnostic ignored "-Wconversion"
#pragma GCC diagnostic ignored "-Wunused-parameter"
#endif
/* ########################### Core Function Access ########################### */
/** \ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
@{
*/
/**
\brief Enable IRQ Interrupts
\details Enables IRQ interrupts by clearing the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
{
__ASM volatile ("cpsie i" : : : "memory");
}
/**
\brief Disable IRQ Interrupts
\details Disables IRQ interrupts by setting the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
{
__ASM volatile ("cpsid i" : : : "memory");
}
/**
\brief Get Control Register
\details Returns the content of the Control Register.
\return Control Register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
{
uint32_t result;
__ASM volatile ("MRS %0, control" : "=r" (result) );
return(result);
}
/**
\brief Set Control Register
\details Writes the given value to the Control Register.
\param [in] control Control Register value to set
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
{
__ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
}
/**
\brief Get IPSR Register
\details Returns the content of the IPSR Register.
\return IPSR Register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
{
uint32_t result;
__ASM volatile ("MRS %0, ipsr" : "=r" (result) );
return(result);
}
/**
\brief Get APSR Register
\details Returns the content of the APSR Register.
\return APSR Register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
{
uint32_t result;
__ASM volatile ("MRS %0, apsr" : "=r" (result) );
return(result);
}
/**
\brief Get xPSR Register
\details Returns the content of the xPSR Register.
\return xPSR Register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
{
uint32_t result;
__ASM volatile ("MRS %0, xpsr" : "=r" (result) );
return(result);
}
/**
\brief Get Process Stack Pointer
\details Returns the current value of the Process Stack Pointer (PSP).
\return PSP Register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, psp\n" : "=r" (result) );
return(result);
}
/**
\brief Set Process Stack Pointer
\details Assigns the given value to the Process Stack Pointer (PSP).
\param [in] topOfProcStack Process Stack Pointer value to set
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
{
__ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
}
/**
\brief Get Main Stack Pointer
\details Returns the current value of the Main Stack Pointer (MSP).
\return MSP Register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
{
register uint32_t result;
__ASM volatile ("MRS %0, msp\n" : "=r" (result) );
return(result);
}
/**
\brief Set Main Stack Pointer
\details Assigns the given value to the Main Stack Pointer (MSP).
\param [in] topOfMainStack Main Stack Pointer value to set
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
{
__ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
}
/**
\brief Get Priority Mask
\details Returns the current state of the priority mask bit from the Priority Mask Register.
\return Priority Mask value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
{
uint32_t result;
__ASM volatile ("MRS %0, primask" : "=r" (result) );
return(result);
}
/**
\brief Set Priority Mask
\details Assigns the given value to the Priority Mask Register.
\param [in] priMask Priority Mask
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
{
__ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
}
#if (__CORTEX_M >= 0x03U)
/**
\brief Enable FIQ
\details Enables FIQ interrupts by clearing the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
{
__ASM volatile ("cpsie f" : : : "memory");
}
/**
\brief Disable FIQ
\details Disables FIQ interrupts by setting the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
{
__ASM volatile ("cpsid f" : : : "memory");
}
/**
\brief Get Base Priority
\details Returns the current value of the Base Priority register.
\return Base Priority register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
{
uint32_t result;
__ASM volatile ("MRS %0, basepri" : "=r" (result) );
return(result);
}
/**
\brief Set Base Priority
\details Assigns the given value to the Base Priority register.
\param [in] basePri Base Priority value to set
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
{
__ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
}
/**
\brief Set Base Priority with condition
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
or the new value increases the BASEPRI priority level.
\param [in] basePri Base Priority value to set
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
{
__ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
}
/**
\brief Get Fault Mask
\details Returns the current value of the Fault Mask register.
\return Fault Mask register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
{
uint32_t result;
__ASM volatile ("MRS %0, faultmask" : "=r" (result) );
return(result);
}
/**
\brief Set Fault Mask
\details Assigns the given value to the Fault Mask register.
\param [in] faultMask Fault Mask value to set
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
{
__ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
}
#endif /* (__CORTEX_M >= 0x03U) */
#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
/**
\brief Get FPSCR
\details Returns the current value of the Floating Point Status/Control register.
\return Floating Point Status/Control register value
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
{
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
uint32_t result;
/* Empty asm statement works as a scheduling barrier */
__ASM volatile ("");
__ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
__ASM volatile ("");
return(result);
#else
return(0);
#endif
}
/**
\brief Set FPSCR
\details Assigns the given value to the Floating Point Status/Control register.
\param [in] fpscr Floating Point Status/Control value to set
*/
__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
{
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
/* Empty asm statement works as a scheduling barrier */
__ASM volatile ("");
__ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
__ASM volatile ("");
#endif
}
#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
/*@} end of CMSIS_Core_RegAccFunctions */
/* ########################## Core Instruction Access ######################### */
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
Access to dedicated instructions
@{
*/
/* Define macros for porting to both thumb1 and thumb2.
* For thumb1, use low register (r0-r7), specified by constraint "l"
* Otherwise, use general registers, specified by constraint "r" */
#if defined (__thumb__) && !defined (__thumb2__)
#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
#define __CMSIS_GCC_USE_REG(r) "l" (r)
#else
#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
#define __CMSIS_GCC_USE_REG(r) "r" (r)
#endif
/**
\brief No Operation
\details No Operation does nothing. This instruction can be used for code alignment purposes.
*/
__attribute__((always_inline)) __STATIC_INLINE void __NOP(void)
{
__ASM volatile ("nop");
}
/**
\brief Wait For Interrupt
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
*/
__attribute__((always_inline)) __STATIC_INLINE void __WFI(void)
{
__ASM volatile ("wfi");
}
/**
\brief Wait For Event
\details Wait For Event is a hint instruction that permits the processor to enter
a low-power state until one of a number of events occurs.
*/
__attribute__((always_inline)) __STATIC_INLINE void __WFE(void)
{
__ASM volatile ("wfe");
}
/**
\brief Send Event
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
*/
__attribute__((always_inline)) __STATIC_INLINE void __SEV(void)
{
__ASM volatile ("sev");
}
/**
\brief Instruction Synchronization Barrier
\details Instruction Synchronization Barrier flushes the pipeline in the processor,
so that all instructions following the ISB are fetched from cache or memory,
after the instruction has been completed.
*/
__attribute__((always_inline)) __STATIC_INLINE void __ISB(void)
{
__ASM volatile ("isb 0xF":::"memory");
}
/**
\brief Data Synchronization Barrier
\details Acts as a special kind of Data Memory Barrier.
It completes when all explicit memory accesses before this instruction complete.
*/
__attribute__((always_inline)) __STATIC_INLINE void __DSB(void)
{
__ASM volatile ("dsb 0xF":::"memory");
}
/**
\brief Data Memory Barrier
\details Ensures the apparent order of the explicit memory operations before
and after the instruction, without ensuring their completion.
*/
__attribute__((always_inline)) __STATIC_INLINE void __DMB(void)
{
__ASM volatile ("dmb 0xF":::"memory");
}
/**
\brief Reverse byte order (32 bit)
\details Reverses the byte order in integer value.
\param [in] value Value to reverse
\return Reversed value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value)
{
#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
return __builtin_bswap32(value);
#else
uint32_t result;
__ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
return(result);
#endif
}
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order in two unsigned short values.
\param [in] value Value to reverse
\return Reversed value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
{
uint32_t result;
__ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
return(result);
}
/**
\brief Reverse byte order in signed short value
\details Reverses the byte order in a signed short value with sign extension to integer.
\param [in] value Value to reverse
\return Reversed value
*/
__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
{
#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
return (short)__builtin_bswap16(value);
#else
int32_t result;
__ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
return(result);
#endif
}
/**
\brief Rotate Right in unsigned value (32 bit)
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
\param [in] value Value to rotate
\param [in] value Number of Bits to rotate
\return Rotated value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
{
return (op1 >> op2) | (op1 << (32U - op2));
}
/**
\brief Breakpoint
\details Causes the processor to enter Debug state.
Debug tools can use this to investigate system state when the instruction at a particular address is reached.
\param [in] value is ignored by the processor.
If required, a debugger can use it to store additional information about the breakpoint.
*/
#define __BKPT(value) __ASM volatile ("bkpt "#value)
/**
\brief Reverse bit order of value
\details Reverses the bit order of the given value.
\param [in] value Value to reverse
\return Reversed value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
{
uint32_t result;
#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
__ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
#else
int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
result = value; /* r will be reversed bits of v; first get LSB of v */
for (value >>= 1U; value; value >>= 1U)
{
result <<= 1U;
result |= value & 1U;
s--;
}
result <<= s; /* shift when v's highest bits are zero */
#endif
return(result);
}
/**
\brief Count leading zeros
\details Counts the number of leading zeros of a data value.
\param [in] value Value to count the leading zeros
\return number of leading zeros in value
*/
#define __CLZ __builtin_clz
#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
/**
\brief LDR Exclusive (8 bit)
\details Executes a exclusive LDR instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
{
uint32_t result;
#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
__ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
#else
/* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
accepted by assembler. So has to use following less efficient pattern.
*/
__ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
#endif
return ((uint8_t) result); /* Add explicit type cast here */
}
/**
\brief LDR Exclusive (16 bit)
\details Executes a exclusive LDR instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
{
uint32_t result;
#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
__ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
#else
/* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
accepted by assembler. So has to use following less efficient pattern.
*/
__ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
#endif
return ((uint16_t) result); /* Add explicit type cast here */
}
/**
\brief LDR Exclusive (32 bit)
\details Executes a exclusive LDR instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
{
uint32_t result;
__ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
return(result);
}
/**
\brief STR Exclusive (8 bit)
\details Executes a exclusive STR instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
{
uint32_t result;
__ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
return(result);
}
/**
\brief STR Exclusive (16 bit)
\details Executes a exclusive STR instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
{
uint32_t result;
__ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
return(result);
}
/**
\brief STR Exclusive (32 bit)
\details Executes a exclusive STR instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
{
uint32_t result;
__ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
return(result);
}
/**
\brief Remove the exclusive lock
\details Removes the exclusive lock which is created by LDREX.
*/
__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void)
{
__ASM volatile ("clrex" ::: "memory");
}
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
#define __SSAT(ARG1,ARG2) \
({ \
uint32_t __RES, __ARG1 = (ARG1); \
__ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
__RES; \
})
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
#define __USAT(ARG1,ARG2) \
({ \
uint32_t __RES, __ARG1 = (ARG1); \
__ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
__RES; \
})
/**
\brief Rotate Right with Extend (32 bit)
\details Moves each bit of a bitstring right by one bit.
The carry input is shifted in at the left end of the bitstring.
\param [in] value Value to rotate
\return Rotated value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
{
uint32_t result;
__ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
return(result);
}
/**
\brief LDRT Unprivileged (8 bit)
\details Executes a Unprivileged LDRT instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
{
uint32_t result;
#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
__ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
#else
/* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
accepted by assembler. So has to use following less efficient pattern.
*/
__ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
#endif
return ((uint8_t) result); /* Add explicit type cast here */
}
/**
\brief LDRT Unprivileged (16 bit)
\details Executes a Unprivileged LDRT instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
{
uint32_t result;
#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
__ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
#else
/* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
accepted by assembler. So has to use following less efficient pattern.
*/
__ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
#endif
return ((uint16_t) result); /* Add explicit type cast here */
}
/**
\brief LDRT Unprivileged (32 bit)
\details Executes a Unprivileged LDRT instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
{
uint32_t result;
__ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
return(result);
}
/**
\brief STRT Unprivileged (8 bit)
\details Executes a Unprivileged STRT instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
{
__ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
}
/**
\brief STRT Unprivileged (16 bit)
\details Executes a Unprivileged STRT instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
{
__ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
}
/**
\brief STRT Unprivileged (32 bit)
\details Executes a Unprivileged STRT instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
{
__ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
}
#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
/* ################### Compiler specific Intrinsics ########################### */
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
Access to dedicated SIMD instructions
@{
*/
#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
#define __SSAT16(ARG1,ARG2) \
({ \
int32_t __RES, __ARG1 = (ARG1); \
__ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
__RES; \
})
#define __USAT16(ARG1,ARG2) \
({ \
uint32_t __RES, __ARG1 = (ARG1); \
__ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
__RES; \
})
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
{
uint32_t result;
__ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
{
uint32_t result;
__ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
{
union llreg_u{
uint32_t w32[2];
uint64_t w64;
} llr;
llr.w64 = acc;
#ifndef __ARMEB__ /* Little endian */
__ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
#else /* Big endian */
__ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
#endif
return(llr.w64);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
{
union llreg_u{
uint32_t w32[2];
uint64_t w64;
} llr;
llr.w64 = acc;
#ifndef __ARMEB__ /* Little endian */
__ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
#else /* Big endian */
__ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
#endif
return(llr.w64);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
{
uint32_t result;
__ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
{
union llreg_u{
uint32_t w32[2];
uint64_t w64;
} llr;
llr.w64 = acc;
#ifndef __ARMEB__ /* Little endian */
__ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
#else /* Big endian */
__ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
#endif
return(llr.w64);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
{
union llreg_u{
uint32_t w32[2];
uint64_t w64;
} llr;
llr.w64 = acc;
#ifndef __ARMEB__ /* Little endian */
__ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
#else /* Big endian */
__ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
#endif
return(llr.w64);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
{
uint32_t result;
__ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
{
int32_t result;
__ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
{
int32_t result;
__ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
return(result);
}
#define __PKHBT(ARG1,ARG2,ARG3) \
({ \
uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
__ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
__RES; \
})
#define __PKHTB(ARG1,ARG2,ARG3) \
({ \
uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
if (ARG3 == 0) \
__ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
else \
__ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
__RES; \
})
__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
{
int32_t result;
__ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
return(result);
}
#endif /* (__CORTEX_M >= 0x04) */
/*@} end of group CMSIS_SIMD_intrinsics */
#if defined ( __GNUC__ )
#pragma GCC diagnostic pop
#endif
#endif /* __CMSIS_GCC_H */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_cm0.h 0 → 100644
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup Cortex_M0
@{
*/
/* CMSIS CM0 definitions */
#define __CM0_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
#define __CM0_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
__CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#define __STATIC_INLINE static __inline
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#define __STATIC_INLINE static __inline
#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __ICCARM__ )
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
#define __STATIC_INLINE static inline
#elif defined ( __TMS470__ )
#define __ASM __asm /*!< asm keyword for TI CCS Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __CSMC__ )
#define __packed
#define __ASM _asm /*!< asm keyword for COSMIC Compiler */
#define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
#define __STATIC_INLINE static inline
#else
#error Unknown compiler
#endif
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_PCS_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TMS470__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "core_cmInstr.h" /* Core Instruction Access */
#include "core_cmFunc.h" /* Core Function Access */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __CM0_REV
#define __CM0_REV 0x0000U
#warning "__CM0_REV not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RSERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
uint32_t RESERVED0;
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED1;
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the Cortex-M0 header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of Cortex-M0 Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
/* Interrupt Priorities are WORD accessible only under ARMv6M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
/**
\brief Enable External Interrupt
\details Enables a device-specific interrupt in the NVIC interrupt controller.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Disable External Interrupt
\details Disables a device-specific interrupt in the NVIC interrupt controller.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Get Pending Interrupt
\details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
\param [in] IRQn Interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
*/
__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of an external interrupt.
\param [in] IRQn Interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of an external interrupt.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Set Interrupt Priority
\details Sets the priority of an interrupt.
\note The priority cannot be set for every core interrupt.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
*/
__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) < 0)
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of an interrupt.
The interrupt number can be positive to specify an external (device specific) interrupt,
or negative to specify an internal (core) interrupt.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) < 0)
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__STATIC_INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_cm0plus.h 0 → 100644
/**************************************************************************//**
* @file core_cm0plus.h
* @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CM0PLUS_H_GENERIC
#define __CORE_CM0PLUS_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup Cortex-M0+
@{
*/
/* CMSIS CM0+ definitions */
#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
#define __CM0PLUS_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
__CM0PLUS_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#define __STATIC_INLINE static __inline
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#define __STATIC_INLINE static __inline
#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __ICCARM__ )
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
#define __STATIC_INLINE static inline
#elif defined ( __TMS470__ )
#define __ASM __asm /*!< asm keyword for TI CCS Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __CSMC__ )
#define __packed
#define __ASM _asm /*!< asm keyword for COSMIC Compiler */
#define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
#define __STATIC_INLINE static inline
#else
#error Unknown compiler
#endif
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_PCS_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TMS470__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "core_cmInstr.h" /* Core Instruction Access */
#include "core_cmFunc.h" /* Core Function Access */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0PLUS_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0PLUS_H_DEPENDANT
#define __CORE_CM0PLUS_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __CM0PLUS_REV
#define __CM0PLUS_REV 0x0000U
#warning "__CM0PLUS_REV not defined in device header file; using default!"
#endif
#ifndef __MPU_PRESENT
#define __MPU_PRESENT 0U
#warning "__MPU_PRESENT not defined in device header file; using default!"
#endif
#ifndef __VTOR_PRESENT
#define __VTOR_PRESENT 0U
#warning "__VTOR_PRESENT not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group Cortex-M0+ */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
- Core MPU Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RSERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
#if (__VTOR_PRESENT == 1U)
__IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
#else
uint32_t RESERVED0;
#endif
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED1;
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
#if (__VTOR_PRESENT == 1U)
/* SCB Interrupt Control State Register Definitions */
#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */
#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
#endif
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
#if (__MPU_PRESENT == 1U)
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_MPU Memory Protection Unit (MPU)
\brief Type definitions for the Memory Protection Unit (MPU)
@{
*/
/**
\brief Structure type to access the Memory Protection Unit (MPU).
*/
typedef struct
{
__IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
__IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
__IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
__IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
__IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
} MPU_Type;
/* MPU Type Register Definitions */
#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
/* MPU Control Register Definitions */
#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
/* MPU Region Number Register Definitions */
#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
/* MPU Region Base Address Register Definitions */
#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
/* MPU Region Attribute and Size Register Definitions */
#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
/*@} end of group CMSIS_MPU */
#endif
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the Cortex-M0+ header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of Cortex-M0+ Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
#if (__MPU_PRESENT == 1U)
#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
#define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
#endif
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
/* Interrupt Priorities are WORD accessible only under ARMv6M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
/**
\brief Enable External Interrupt
\details Enables a device-specific interrupt in the NVIC interrupt controller.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Disable External Interrupt
\details Disables a device-specific interrupt in the NVIC interrupt controller.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Get Pending Interrupt
\details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
\param [in] IRQn Interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
*/
__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of an external interrupt.
\param [in] IRQn Interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of an external interrupt.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Set Interrupt Priority
\details Sets the priority of an interrupt.
\note The priority cannot be set for every core interrupt.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
*/
__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) < 0)
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of an interrupt.
The interrupt number can be positive to specify an external (device specific) interrupt,
or negative to specify an internal (core) interrupt.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) < 0)
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__STATIC_INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0PLUS_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_cm3.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_cm4.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_cm7.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_cmFunc.h 0 → 100644
/**************************************************************************//**
* @file core_cmFunc.h
* @brief CMSIS Cortex-M Core Function Access Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CMFUNC_H
#define __CORE_CMFUNC_H
/* ########################### Core Function Access ########################### */
/** \ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
@{
*/
/*------------------ RealView Compiler -----------------*/
#if defined ( __CC_ARM )
#include "cmsis_armcc.h"
/*------------------ ARM Compiler V6 -------------------*/
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#include "cmsis_armcc_V6.h"
/*------------------ GNU Compiler ----------------------*/
#elif defined ( __GNUC__ )
#include "cmsis_gcc.h"
/*------------------ ICC Compiler ----------------------*/
#elif defined ( __ICCARM__ )
#include <cmsis_iar.h>
/*------------------ TI CCS Compiler -------------------*/
#elif defined ( __TMS470__ )
#include <cmsis_ccs.h>
/*------------------ TASKING Compiler ------------------*/
#elif defined ( __TASKING__ )
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all intrinsics,
* Including the CMSIS ones.
*/
/*------------------ COSMIC Compiler -------------------*/
#elif defined ( __CSMC__ )
#include <cmsis_csm.h>
#endif
/*@} end of CMSIS_Core_RegAccFunctions */
#endif /* __CORE_CMFUNC_H */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_cmInstr.h 0 → 100644
/**************************************************************************//**
* @file core_cmInstr.h
* @brief CMSIS Cortex-M Core Instruction Access Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CMINSTR_H
#define __CORE_CMINSTR_H
/* ########################## Core Instruction Access ######################### */
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
Access to dedicated instructions
@{
*/
/*------------------ RealView Compiler -----------------*/
#if defined ( __CC_ARM )
#include "cmsis_armcc.h"
/*------------------ ARM Compiler V6 -------------------*/
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#include "cmsis_armcc_V6.h"
/*------------------ GNU Compiler ----------------------*/
#elif defined ( __GNUC__ )
#include "cmsis_gcc.h"
/*------------------ ICC Compiler ----------------------*/
#elif defined ( __ICCARM__ )
#include <cmsis_iar.h>
/*------------------ TI CCS Compiler -------------------*/
#elif defined ( __TMS470__ )
#include <cmsis_ccs.h>
/*------------------ TASKING Compiler ------------------*/
#elif defined ( __TASKING__ )
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all intrinsics,
* Including the CMSIS ones.
*/
/*------------------ COSMIC Compiler -------------------*/
#elif defined ( __CSMC__ )
#include <cmsis_csm.h>
#endif
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
#endif /* __CORE_CMINSTR_H */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_cmSimd.h 0 → 100644
/**************************************************************************//**
* @file core_cmSimd.h
* @brief CMSIS Cortex-M SIMD Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CMSIMD_H
#define __CORE_CMSIMD_H
#ifdef __cplusplus
extern "C" {
#endif
/* ################### Compiler specific Intrinsics ########################### */
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
Access to dedicated SIMD instructions
@{
*/
/*------------------ RealView Compiler -----------------*/
#if defined ( __CC_ARM )
#include "cmsis_armcc.h"
/*------------------ ARM Compiler V6 -------------------*/
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#include "cmsis_armcc_V6.h"
/*------------------ GNU Compiler ----------------------*/
#elif defined ( __GNUC__ )
#include "cmsis_gcc.h"
/*------------------ ICC Compiler ----------------------*/
#elif defined ( __ICCARM__ )
#include <cmsis_iar.h>
/*------------------ TI CCS Compiler -------------------*/
#elif defined ( __TMS470__ )
#include <cmsis_ccs.h>
/*------------------ TASKING Compiler ------------------*/
#elif defined ( __TASKING__ )
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all intrinsics,
* Including the CMSIS ones.
*/
/*------------------ COSMIC Compiler -------------------*/
#elif defined ( __CSMC__ )
#include <cmsis_csm.h>
#endif
/*@} end of group CMSIS_SIMD_intrinsics */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CMSIMD_H */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_sc000.h 0 → 100644
/**************************************************************************//**
* @file core_sc000.h
* @brief CMSIS SC000 Core Peripheral Access Layer Header File
* @version V4.30
* @date 20. October 2015
******************************************************************************/
/* Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_SC000_H_GENERIC
#define __CORE_SC000_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup SC000
@{
*/
/* CMSIS SC000 definitions */
#define __SC000_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
#define __SC000_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
__SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
#define __CORTEX_SC (000U) /*!< Cortex secure core */
#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#define __STATIC_INLINE static __inline
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#define __STATIC_INLINE static __inline
#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __ICCARM__ )
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
#define __STATIC_INLINE static inline
#elif defined ( __TMS470__ )
#define __ASM __asm /*!< asm keyword for TI CCS Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#define __STATIC_INLINE static inline
#elif defined ( __CSMC__ )
#define __packed
#define __ASM _asm /*!< asm keyword for COSMIC Compiler */
#define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
#define __STATIC_INLINE static inline
#else
#error Unknown compiler
#endif
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_PCS_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TMS470__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "core_cmInstr.h" /* Core Instruction Access */
#include "core_cmFunc.h" /* Core Function Access */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_SC000_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_SC000_H_DEPENDANT
#define __CORE_SC000_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __SC000_REV
#define __SC000_REV 0x0000U
#warning "__SC000_REV not defined in device header file; using default!"
#endif
#ifndef __MPU_PRESENT
#define __MPU_PRESENT 0U
#warning "__MPU_PRESENT not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group SC000 */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
- Core MPU Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RSERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
__IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED0[1U];
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
uint32_t RESERVED1[154U];
__IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
\brief Type definitions for the System Control and ID Register not in the SCB
@{
*/
/**
\brief Structure type to access the System Control and ID Register not in the SCB.
*/
typedef struct
{
uint32_t RESERVED0[2U];
__IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
} SCnSCB_Type;
/* Auxiliary Control Register Definitions */
#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
/*@} end of group CMSIS_SCnotSCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
#if (__MPU_PRESENT == 1U)
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_MPU Memory Protection Unit (MPU)
\brief Type definitions for the Memory Protection Unit (MPU)
@{
*/
/**
\brief Structure type to access the Memory Protection Unit (MPU).
*/
typedef struct
{
__IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
__IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
__IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
__IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
__IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
} MPU_Type;
/* MPU Type Register Definitions */
#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
/* MPU Control Register Definitions */
#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
/* MPU Region Number Register Definitions */
#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
/* MPU Region Base Address Register Definitions */
#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
/* MPU Region Attribute and Size Register Definitions */
#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
/*@} end of group CMSIS_MPU */
#endif
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the SC000 header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of SC000 Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
#if (__MPU_PRESENT == 1U)
#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
#define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
#endif
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
/* Interrupt Priorities are WORD accessible only under ARMv6M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
/**
\brief Enable External Interrupt
\details Enables a device-specific interrupt in the NVIC interrupt controller.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Disable External Interrupt
\details Disables a device-specific interrupt in the NVIC interrupt controller.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Get Pending Interrupt
\details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
\param [in] IRQn Interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
*/
__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of an external interrupt.
\param [in] IRQn Interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of an external interrupt.
\param [in] IRQn External interrupt number. Value cannot be negative.
*/
__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
}
/**
\brief Set Interrupt Priority
\details Sets the priority of an interrupt.
\note The priority cannot be set for every core interrupt.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
*/
__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) < 0)
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of an interrupt.
The interrupt number can be positive to specify an external (device specific) interrupt,
or negative to specify an internal (core) interrupt.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) < 0)
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__STATIC_INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_SC000_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */
stmf4discoveryRTOS-SW/Drivers/CMSIS/Include/core_sc300.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_H
#define __STM32F4xx_HAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_conf.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup HAL
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup HAL_Exported_Macros HAL Exported Macros
* @{
*/
/** @brief Freeze/Unfreeze Peripherals in Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
/** @brief Main Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
/** @brief System Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
}while(0);
/** @brief Embedded SRAM mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
}while(0);
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
}while(0);
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
}while(0);
/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
}while(0);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
* @{
*/
/** @brief SYSCFG Break Lockup lock
* Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input
* @note The selected configuration is locked and can be unlocked by system reset
*/
#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
}while(0)
/**
* @}
*/
/** @defgroup PVD_Lock_Enable PVD Lock
* @{
*/
/** @brief SYSCFG Break PVD lock
* Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
* @note The selected configuration is locked and can be unlocked by system reset
*/
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
}while(0)
/**
* @}
*/
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup HAL_Exported_Functions
* @{
*/
/** @addtogroup HAL_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ******************************/
HAL_StatusTypeDef HAL_Init(void);
HAL_StatusTypeDef HAL_DeInit(void);
void HAL_MspInit(void);
void HAL_MspDeInit(void);
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
/**
* @}
*/
/** @addtogroup HAL_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_IncTick(void);
void HAL_Delay(__IO uint32_t Delay);
uint32_t HAL_GetTick(void);
void HAL_SuspendTick(void);
void HAL_ResumeTick(void);
uint32_t HAL_GetHalVersion(void);
uint32_t HAL_GetREVID(void);
uint32_t HAL_GetDEVID(void);
void HAL_DBGMCU_EnableDBGSleepMode(void);
void HAL_DBGMCU_DisableDBGSleepMode(void);
void HAL_DBGMCU_EnableDBGStopMode(void);
void HAL_DBGMCU_DisableDBGStopMode(void);
void HAL_DBGMCU_EnableDBGStandbyMode(void);
void HAL_DBGMCU_DisableDBGStandbyMode(void);
void HAL_EnableCompensationCell(void);
void HAL_DisableCompensationCell(void);
void HAL_GetUID(uint32_t *UID);
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
void HAL_EnableMemorySwappingBank(void);
void HAL_DisableMemorySwappingBank(void);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup HAL_Private_Variables HAL Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup HAL_Private_Constants HAL Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_adc.h
* @author MCD Application Team
* @brief Header file containing functions prototypes of ADC HAL library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_ADC_H
#define __STM32F4xx_ADC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup ADC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup ADC_Exported_Types ADC Exported Types
* @{
*/
/**
* @brief Structure definition of ADC and regular group initialization
* @note Parameters of this structure are shared within 2 scopes:
* - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, ScanConvMode, DataAlign, ScanConvMode, EOCSelection, LowPowerAutoWait, LowPowerAutoPowerOff, ChannelsBank.
* - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
* @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
* ADC state can be either:
* - For all parameters: ADC disabled
* - For all parameters except 'Resolution', 'ScanConvMode', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group.
* - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going.
* If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
* without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
*/
typedef struct
{
uint32_t ClockPrescaler; /*!< Select ADC clock prescaler. The clock is common for
all the ADCs.
This parameter can be a value of @ref ADC_ClockPrescaler */
uint32_t Resolution; /*!< Configures the ADC resolution.
This parameter can be a value of @ref ADC_Resolution */
uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
This parameter can be a value of @ref ADC_Data_align */
uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
Scan direction is upward: from rank1 to rank 'n'.
This parameter can be set to ENABLE or DISABLE */
uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
This parameter can be a value of @ref ADC_EOCSelection.
Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence.
Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT)
or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion.
Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()).
If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */
uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
after the selected trigger occurred (software start or external trigger).
This parameter can be set to ENABLE or DISABLE. */
uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
This parameter can be set to ENABLE or DISABLE. */
uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
If set to ADC_SOFTWARE_START, external triggers are disabled.
If set to external trigger source, triggering is on event rising edge by default.
This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion).
This parameter can be set to ENABLE or DISABLE. */
}ADC_InitTypeDef;
/**
* @brief Structure definition of ADC channel for regular group
* @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
* ADC can be either disabled or enabled without conversion on going on regular group.
*/
typedef struct
{
uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
This parameter can be a value of @ref ADC_channels */
uint32_t Rank; /*!< Specifies the rank in the regular group sequencer.
This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
Unit: ADC clock cycles
Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
This parameter can be a value of @ref ADC_sampling_times
Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
}ADC_ChannelConfTypeDef;
/**
* @brief ADC Configuration multi-mode structure definition
*/
typedef struct
{
uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode.
This parameter can be a value of @ref ADC_analog_watchdog_selection */
uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
This parameter must be a 12-bit value. */
uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
This parameter must be a 12-bit value. */
uint32_t Channel; /*!< Configures ADC channel for the analog watchdog.
This parameter has an effect only if watchdog mode is configured on single channel
This parameter can be a value of @ref ADC_channels */
uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured
is interrupt mode or in polling mode.
This parameter can be set to ENABLE or DISABLE */
uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
}ADC_AnalogWDGConfTypeDef;
/**
* @brief HAL ADC state machine: ADC states definition (bitfields)
*/
/* States of ADC global scope */
#define HAL_ADC_STATE_RESET 0x00000000U /*!< ADC not yet initialized or disabled */
#define HAL_ADC_STATE_READY 0x00000001U /*!< ADC peripheral ready for use */
#define HAL_ADC_STATE_BUSY_INTERNAL 0x00000002U /*!< ADC is busy to internal process (initialization, calibration) */
#define HAL_ADC_STATE_TIMEOUT 0x00000004U /*!< TimeOut occurrence */
/* States of ADC errors */
#define HAL_ADC_STATE_ERROR_INTERNAL 0x00000010U /*!< Internal error occurrence */
#define HAL_ADC_STATE_ERROR_CONFIG 0x00000020U /*!< Configuration error occurrence */
#define HAL_ADC_STATE_ERROR_DMA 0x00000040U /*!< DMA error occurrence */
/* States of ADC group regular */
#define HAL_ADC_STATE_REG_BUSY 0x00000100U /*!< A conversion on group regular is ongoing or can occur (either by continuous mode,
external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
#define HAL_ADC_STATE_REG_EOC 0x00000200U /*!< Conversion data available on group regular */
#define HAL_ADC_STATE_REG_OVR 0x00000400U /*!< Overrun occurrence */
/* States of ADC group injected */
#define HAL_ADC_STATE_INJ_BUSY 0x00001000U /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode,
external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
#define HAL_ADC_STATE_INJ_EOC 0x00002000U /*!< Conversion data available on group injected */
/* States of ADC analog watchdogs */
#define HAL_ADC_STATE_AWD1 0x00010000U /*!< Out-of-window occurrence of analog watchdog 1 */
#define HAL_ADC_STATE_AWD2 0x00020000U /*!< Not available on STM32F4 device: Out-of-window occurrence of analog watchdog 2 */
#define HAL_ADC_STATE_AWD3 0x00040000U /*!< Not available on STM32F4 device: Out-of-window occurrence of analog watchdog 3 */
/* States of ADC multi-mode */
#define HAL_ADC_STATE_MULTIMODE_SLAVE 0x00100000U /*!< Not available on STM32F4 device: ADC in multimode slave state, controlled by another ADC master ( */
/**
* @brief ADC handle Structure definition
*/
typedef struct
{
ADC_TypeDef *Instance; /*!< Register base address */
ADC_InitTypeDef Init; /*!< ADC required parameters */
__IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
HAL_LockTypeDef Lock; /*!< ADC locking object */
__IO uint32_t State; /*!< ADC communication state */
__IO uint32_t ErrorCode; /*!< ADC Error code */
}ADC_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup ADC_Exported_Constants ADC Exported Constants
* @{
*/
/** @defgroup ADC_Error_Code ADC Error Code
* @{
*/
#define HAL_ADC_ERROR_NONE 0x00U /*!< No error */
#define HAL_ADC_ERROR_INTERNAL 0x01U /*!< ADC IP internal error: if problem of clocking,
enable/disable, erroneous state */
#define HAL_ADC_ERROR_OVR 0x02U /*!< Overrun error */
#define HAL_ADC_ERROR_DMA 0x04U /*!< DMA transfer error */
/**
* @}
*/
/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler
* @{
*/
#define ADC_CLOCK_SYNC_PCLK_DIV2 0x00000000U
#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0)
#define ADC_CLOCK_SYNC_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1)
#define ADC_CLOCK_SYNC_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE)
/**
* @}
*/
/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases
* @{
*/
#define ADC_TWOSAMPLINGDELAY_5CYCLES 0x00000000U
#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0)
#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1)
#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2)
#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3)
#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY)
/**
* @}
*/
/** @defgroup ADC_Resolution ADC Resolution
* @{
*/
#define ADC_RESOLUTION_12B 0x00000000U
#define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0)
#define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1)
#define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES)
/**
* @}
*/
/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular
* @{
*/
#define ADC_EXTERNALTRIGCONVEDGE_NONE 0x00000000U
#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0)
#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1)
#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN)
/**
* @}
*/
/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular
* @{
*/
/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for */
/* compatibility with other STM32 devices. */
#define ADC_EXTERNALTRIGCONV_T1_CC1 0x00000000U
#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0)
#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1)
#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2)
#define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
#define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3)
#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
#define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
#define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
#define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL)
#define ADC_SOFTWARE_START ((uint32_t)ADC_CR2_EXTSEL + 1U)
/**
* @}
*/
/** @defgroup ADC_Data_align ADC Data Align
* @{
*/
#define ADC_DATAALIGN_RIGHT 0x00000000U
#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
/**
* @}
*/
/** @defgroup ADC_channels ADC Common Channels
* @{
*/
#define ADC_CHANNEL_0 0x00000000U
#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0)
#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1)
#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2)
#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3)
#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4)
#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17)
#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18)
/**
* @}
*/
/** @defgroup ADC_sampling_times ADC Sampling Times
* @{
*/
#define ADC_SAMPLETIME_3CYCLES 0x00000000U
#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0)
#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1)
#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2)
#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10)
/**
* @}
*/
/** @defgroup ADC_EOCSelection ADC EOC Selection
* @{
*/
#define ADC_EOC_SEQ_CONV 0x00000000U
#define ADC_EOC_SINGLE_CONV 0x00000001U
#define ADC_EOC_SINGLE_SEQ_CONV 0x00000002U /*!< reserved for future use */
/**
* @}
*/
/** @defgroup ADC_Event_type ADC Event Type
* @{
*/
#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD)
#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR)
/**
* @}
*/
/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection
* @{
*/
#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN)
#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN)
#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
#define ADC_ANALOGWATCHDOG_NONE 0x00000000U
/**
* @}
*/
/** @defgroup ADC_interrupts_definition ADC Interrupts Definition
* @{
*/
#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE)
#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE)
#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE)
#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE)
/**
* @}
*/
/** @defgroup ADC_flags_definition ADC Flags Definition
* @{
*/
#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD)
#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC)
#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC)
#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT)
#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT)
#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR)
/**
* @}
*/
/** @defgroup ADC_channels_type ADC Channels Type
* @{
*/
#define ADC_ALL_CHANNELS 0x00000001U
#define ADC_REGULAR_CHANNELS 0x00000002U /*!< reserved for future use */
#define ADC_INJECTED_CHANNELS 0x00000003U /*!< reserved for future use */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup ADC_Exported_Macros ADC Exported Macros
* @{
*/
/** @brief Reset ADC handle state
* @param __HANDLE__ ADC handle
* @retval None
*/
#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
/**
* @brief Enable the ADC peripheral.
* @param __HANDLE__ ADC handle
* @retval None
*/
#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON)
/**
* @brief Disable the ADC peripheral.
* @param __HANDLE__ ADC handle
* @retval None
*/
#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON)
/**
* @brief Enable the ADC end of conversion interrupt.
* @param __HANDLE__ specifies the ADC Handle.
* @param __INTERRUPT__ ADC Interrupt.
* @retval None
*/
#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
/**
* @brief Disable the ADC end of conversion interrupt.
* @param __HANDLE__ specifies the ADC Handle.
* @param __INTERRUPT__ ADC interrupt.
* @retval None
*/
#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
/** @brief Check if the specified ADC interrupt source is enabled or disabled.
* @param __HANDLE__ specifies the ADC Handle.
* @param __INTERRUPT__ specifies the ADC interrupt source to check.
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
/**
* @brief Clear the ADC's pending flags.
* @param __HANDLE__ specifies the ADC Handle.
* @param __FLAG__ ADC flag.
* @retval None
*/
#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
/**
* @brief Get the selected ADC's flag status.
* @param __HANDLE__ specifies the ADC Handle.
* @param __FLAG__ ADC flag.
* @retval None
*/
#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/**
* @}
*/
/* Include ADC HAL Extension module */
#include "stm32f4xx_hal_adc_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup ADC_Exported_Functions
* @{
*/
/** @addtogroup ADC_Exported_Functions_Group1
* @{
*/
/* Initialization/de-initialization functions ***********************************/
HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
/**
* @}
*/
/** @addtogroup ADC_Exported_Functions_Group2
* @{
*/
/* I/O operation functions ******************************************************/
HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
/**
* @}
*/
/** @addtogroup ADC_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions *************************************************/
HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
/**
* @}
*/
/** @addtogroup ADC_Exported_Functions_Group4
* @{
*/
/* Peripheral State functions ***************************************************/
uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup ADC_Private_Constants ADC Private Constants
* @{
*/
/* Delay for ADC stabilization time. */
/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */
/* Unit: us */
#define ADC_STAB_DELAY_US 3U
/* Delay for temperature sensor stabilization time. */
/* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */
/* Unit: us */
#define ADC_TEMPSENSOR_DELAY_US 10U
/**
* @}
*/
/* Private macro ------------------------------------------------------------*/
/** @defgroup ADC_Private_Macros ADC Private Macros
* @{
*/
/* Macro reserved for internal HAL driver usage, not intended to be used in
code of final user */
/**
* @brief Verification of ADC state: enabled or disabled
* @param __HANDLE__ ADC handle
* @retval SET (ADC enabled) or RESET (ADC disabled)
*/
#define ADC_IS_ENABLE(__HANDLE__) \
((( ((__HANDLE__)->Instance->SR & ADC_SR_ADONS) == ADC_SR_ADONS ) \
) ? SET : RESET)
/**
* @brief Test if conversion trigger of regular group is software start
* or external trigger.
* @param __HANDLE__ ADC handle
* @retval SET (software start) or RESET (external trigger)
*/
#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
(((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
/**
* @brief Test if conversion trigger of injected group is software start
* or external trigger.
* @param __HANDLE__ ADC handle
* @retval SET (software start) or RESET (external trigger)
*/
#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
(((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTEN) == RESET)
/**
* @brief Simultaneously clears and sets specific bits of the handle State
* @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(),
* the first parameter is the ADC handle State, the second parameter is the
* bit field to clear, the third and last parameter is the bit field to set.
* @retval None
*/
#define ADC_STATE_CLR_SET MODIFY_REG
/**
* @brief Clear ADC error code (set it to error code: "no error")
* @param __HANDLE__ ADC handle
* @retval None
*/
#define ADC_CLEAR_ERRORCODE(__HANDLE__) \
((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) || \
((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV6) || \
((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV8))
#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES))
#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \
((RESOLUTION) == ADC_RESOLUTION_10B) || \
((RESOLUTION) == ADC_RESOLUTION_8B) || \
((RESOLUTION) == ADC_RESOLUTION_6B))
#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11)|| \
((REGTRIG) == ADC_SOFTWARE_START))
#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
((ALIGN) == ADC_DATAALIGN_LEFT))
#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \
((TIME) == ADC_SAMPLETIME_15CYCLES) || \
((TIME) == ADC_SAMPLETIME_28CYCLES) || \
((TIME) == ADC_SAMPLETIME_56CYCLES) || \
((TIME) == ADC_SAMPLETIME_84CYCLES) || \
((TIME) == ADC_SAMPLETIME_112CYCLES) || \
((TIME) == ADC_SAMPLETIME_144CYCLES) || \
((TIME) == ADC_SAMPLETIME_480CYCLES))
#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == ADC_EOC_SINGLE_CONV) || \
((EOCSelection) == ADC_EOC_SEQ_CONV) || \
((EOCSelection) == ADC_EOC_SINGLE_SEQ_CONV))
#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \
((EVENT) == ADC_OVR_EVENT))
#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \
((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE))
#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \
((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \
((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS))
#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFFU)
#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 16U))
#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 1U) && ((RANK) <= (16U)))
#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 1U) && ((NUMBER) <= 8U))
#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= 0x0FFFU)) || \
(((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= 0x03FFU)) || \
(((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= 0x00FFU)) || \
(((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= 0x003FU)))
/**
* @brief Set ADC Regular channel sequence length.
* @param _NbrOfConversion_ Regular channel sequence length.
* @retval None
*/
#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1U) << 20U)
/**
* @brief Set the ADC's sample time for channel numbers between 10 and 18.
* @param _SAMPLETIME_ Sample time parameter.
* @param _CHANNELNB_ Channel number.
* @retval None
*/
#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3U * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10U)))
/**
* @brief Set the ADC's sample time for channel numbers between 0 and 9.
* @param _SAMPLETIME_ Sample time parameter.
* @param _CHANNELNB_ Channel number.
* @retval None
*/
#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3U * ((uint32_t)((uint16_t)(_CHANNELNB_)))))
/**
* @brief Set the selected regular channel rank for rank between 1 and 6.
* @param _CHANNELNB_ Channel number.
* @param _RANKNB_ Rank number.
* @retval None
*/
#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 1U)))
/**
* @brief Set the selected regular channel rank for rank between 7 and 12.
* @param _CHANNELNB_ Channel number.
* @param _RANKNB_ Rank number.
* @retval None
*/
#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 7U)))
/**
* @brief Set the selected regular channel rank for rank between 13 and 16.
* @param _CHANNELNB_ Channel number.
* @param _RANKNB_ Rank number.
* @retval None
*/
#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 13U)))
/**
* @brief Enable ADC continuous conversion mode.
* @param _CONTINUOUS_MODE_ Continuous mode.
* @retval None
*/
#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1U)
/**
* @brief Configures the number of discontinuous conversions for the regular group channels.
* @param _NBR_DISCONTINUOUSCONV_ Number of discontinuous conversions.
* @retval None
*/
#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1U) << ADC_CR1_DISCNUM_Pos)
/**
* @brief Enable ADC scan mode.
* @param _SCANCONV_MODE_ Scan conversion mode.
* @retval None
*/
#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8U)
/**
* @brief Enable the ADC end of conversion selection.
* @param _EOCSelection_MODE_ End of conversion selection mode.
* @retval None
*/
#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10U)
/**
* @brief Enable the ADC DMA continuous request.
* @param _DMAContReq_MODE_ DMA continuous request mode.
* @retval None
*/
#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9U)
/**
* @brief Return resolution bits in CR1 register.
* @param __HANDLE__ ADC handle
* @retval None
*/
#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup ADC_Private_Functions ADC Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_ADC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_adc_ex.h
* @author MCD Application Team
* @brief Header file of ADC HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_ADC_EX_H
#define __STM32F4xx_ADC_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup ADCEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup ADCEx_Exported_Types ADC Exported Types
* @{
*/
/**
* @brief ADC Configuration injected Channel structure definition
* @note Parameters of this structure are shared within 2 scopes:
* - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
* - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
* AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
* @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
* ADC state can be either:
* - For all parameters: ADC disabled
* - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.
* - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.
*/
typedef struct
{
uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
This parameter can be a value of @ref ADC_channels
Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
uint32_t InjectedRank; /*!< Rank in the injected group sequencer
This parameter must be a value of @ref ADCEx_injected_rank
Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
Unit: ADC clock cycles
Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
This parameter can be a value of @ref ADC_sampling_times
Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
Offset value must be a positive number.
Depending of ADC resolution selected (12, 10, 8 or 6 bits),
this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
This parameter must be a number between Min_Data = 1 and Max_Data = 4.
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
configure a channel on injected group can impact the configuration of other channels previously set. */
uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
This parameter can be set to ENABLE or DISABLE.
Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
configure a channel on injected group can impact the configuration of other channels previously set. */
uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
This parameter can be set to ENABLE or DISABLE.
Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
To maintain JAUTO always enabled, DMA must be configured in circular mode.
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
configure a channel on injected group can impact the configuration of other channels previously set. */
uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
If set to external trigger source, triggering is on event rising edge.
This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected
Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
configure a channel on injected group can impact the configuration of other channels previously set. */
uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.
This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
configure a channel on injected group can impact the configuration of other channels previously set. */
}ADC_InjectionConfTypeDef;
/**
* @brief ADC Configuration multi-mode structure definition
*/
typedef struct
{
uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
This parameter can be a value of @ref ADCEx_Common_mode */
uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode.
This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
}ADC_MultiModeTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup ADCEx_Exported_Constants ADC Exported Constants
* @{
*/
/** @defgroup ADCEx_Common_mode ADC Common Mode
* @{
*/
#define ADC_MODE_INDEPENDENT 0x00000000U
#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0)
#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1)
#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
/**
* @}
*/
/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode
* @{
*/
#define ADC_DMAACCESSMODE_DISABLED 0x00000000U /*!< DMA mode disabled */
#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
/**
* @}
*/
/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected
* @{
*/
#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE 0x00000000U
#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
/**
* @}
*/
/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected
* @{
*/
#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 0x00000000U
#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0)
#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1)
#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
#define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2)
#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3)
#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
#define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL)
#define ADC_INJECTED_SOFTWARE_START ((uint32_t)ADC_CR2_JEXTSEL + 1U)
/**
* @}
*/
/** @defgroup ADCEx_injected_rank ADC Injected Rank
* @{
*/
#define ADC_INJECTED_RANK_1 0x00000001U
#define ADC_INJECTED_RANK_2 0x00000002U
#define ADC_INJECTED_RANK_3 0x00000003U
#define ADC_INJECTED_RANK_4 0x00000004U
/**
* @}
*/
/** @defgroup ADCEx_channels ADC Specific Channels
* @{
*/
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \
defined(STM32F412Cx)
#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16)
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F412Zx ||
STM32F412Vx || STM32F412Rx || STM32F412Cx */
#if defined(STM32F413xx) || defined(STM32F423xx)
#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18)
#endif /* STM32F413xx || STM32F423xx */
#if defined(STM32F411xE) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT 0x10000000U /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */
#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT)
#endif /* STM32F411xE || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup ADC_Exported_Macros ADC Exported Macros
* @{
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
/**
* @brief Disable internal path of ADC channel Vbat
* @note Use case of this macro:
* On devices STM32F42x and STM32F43x, ADC internal channels
* Vbat and VrefInt share the same internal path, only
* one of them can be enabled.This macro is to be used when ADC
* channels Vbat and VrefInt are selected, and must be called
* before starting conversion of ADC channel VrefInt in order
* to disable ADC channel Vbat.
* @retval None
*/
#define __HAL_ADC_PATH_INTERNAL_VBAT_DISABLE() (ADC->CCR &= ~(ADC_CCR_VBATE))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup ADCEx_Exported_Functions
* @{
*/
/** @addtogroup ADCEx_Exported_Functions_Group1
* @{
*/
/* I/O operation functions ******************************************************/
HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
/* Peripheral Control functions *************************************************/
HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup ADCEx_Private_Constants ADC Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup ADCEx_Private_Macros ADC Private Macros
* @{
*/
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
#define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18)
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||
STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18) || \
((CHANNEL) == ADC_CHANNEL_TEMPSENSOR))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
((MODE) == ADC_DUALMODE_INJECSIMULT) || \
((MODE) == ADC_DUALMODE_REGSIMULT) || \
((MODE) == ADC_DUALMODE_INTERL) || \
((MODE) == ADC_DUALMODE_ALTERTRIG) || \
((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \
((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \
((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \
((MODE) == ADC_TRIPLEMODE_INTERL) || \
((MODE) == ADC_TRIPLEMODE_ALTERTRIG))
#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
((MODE) == ADC_DMAACCESSMODE_1) || \
((MODE) == ADC_DMAACCESSMODE_2) || \
((MODE) == ADC_DMAACCESSMODE_3))
#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \
((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \
((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15)|| \
((INJTRIG) == ADC_INJECTED_SOFTWARE_START))
#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 4U))
#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 1U) && ((RANK) <= 4U))
/**
* @brief Set the selected injected Channel rank.
* @param _CHANNELNB_ Channel number.
* @param _RANKNB_ Rank number.
* @param _JSQR_JL_ Sequence length.
* @retval None
*/
#define ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * (uint8_t)(((_RANKNB_) + 3U) - (_JSQR_JL_))))
/**
* @brief Defines if the selected ADC is within ADC common register ADC123 or ADC1
* if available (ADC2, ADC3 availability depends on STM32 product)
* @param __HANDLE__ ADC handle
* @retval Common control register ADC123 or ADC1
*/
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F429xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define ADC_COMMON_REGISTER(__HANDLE__) ADC123_COMMON
#else
#define ADC_COMMON_REGISTER(__HANDLE__) ADC1_COMMON
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx || STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup ADCEx_Private_Functions ADC Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_ADC_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_can.h
* @author MCD Application Team
* @brief Header file of CAN HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_CAN_H
#define __STM32F4xx_HAL_CAN_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup CAN
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CAN_Exported_Types CAN Exported Types
* @{
*/
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_RX0 = 0x22U, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_RX1 = 0x32U, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_TX_RX0 = 0x42U, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_TX_RX1 = 0x52U, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_RX0_RX1 = 0x62U, /*!< CAN process is ongoing */
HAL_CAN_STATE_BUSY_TX_RX0_RX1 = 0x72U, /*!< CAN process is ongoing */
HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< CAN in Timeout state */
HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */
}HAL_CAN_StateTypeDef;
/**
* @brief CAN init structure definition
*/
typedef struct
{
uint32_t Prescaler; /*!< Specifies the length of a time quantum.
This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
uint32_t Mode; /*!< Specifies the CAN operating mode.
This parameter can be a value of @ref CAN_operating_mode */
uint32_t SJW; /*!< Specifies the maximum number of time quanta
the CAN hardware is allowed to lengthen or
shorten a bit to perform resynchronization.
This parameter can be a value of @ref CAN_synchronisation_jump_width */
uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
This parameter can be set to ENABLE or DISABLE. */
uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
This parameter can be set to ENABLE or DISABLE */
uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
This parameter can be set to ENABLE or DISABLE */
uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
This parameter can be set to ENABLE or DISABLE */
uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode.
This parameter can be set to ENABLE or DISABLE */
uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
This parameter can be set to ENABLE or DISABLE */
}CAN_InitTypeDef;
/**
* @brief CAN filter configuration structure definition
*/
typedef struct
{
uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
configuration, first one for a 16-bit configuration).
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
configuration, second one for a 16-bit configuration).
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
according to the mode (MSBs for a 32-bit configuration,
first one for a 16-bit configuration).
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
according to the mode (LSBs for a 32-bit configuration,
second one for a 16-bit configuration).
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
This parameter can be a value of @ref CAN_filter_FIFO */
uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
This parameter can be a value of @ref CAN_filter_mode */
uint32_t FilterScale; /*!< Specifies the filter scale.
This parameter can be a value of @ref CAN_filter_scale */
uint32_t FilterActivation; /*!< Enable or disable the filter.
This parameter can be set to ENABLE or DISABLE. */
uint32_t BankNumber; /*!< Select the start slave bank filter.
This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
}CAN_FilterConfTypeDef;
/**
* @brief CAN Tx message structure definition
*/
typedef struct
{
uint32_t StdId; /*!< Specifies the standard identifier.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
uint32_t ExtId; /*!< Specifies the extended identifier.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
This parameter can be a value of @ref CAN_Identifier_Type */
uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
This parameter can be a value of @ref CAN_remote_transmission_request */
uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
uint8_t Data[8]; /*!< Contains the data to be transmitted.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
}CanTxMsgTypeDef;
/**
* @brief CAN Rx message structure definition
*/
typedef struct
{
uint32_t StdId; /*!< Specifies the standard identifier.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
uint32_t ExtId; /*!< Specifies the extended identifier.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
This parameter can be a value of @ref CAN_Identifier_Type */
uint32_t RTR; /*!< Specifies the type of frame for the received message.
This parameter can be a value of @ref CAN_remote_transmission_request */
uint32_t DLC; /*!< Specifies the length of the frame that will be received.
This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
uint8_t Data[8]; /*!< Contains the data to be received.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
This parameter can be CAN_FIFO0 or CAN_FIFO1 */
}CanRxMsgTypeDef;
/**
* @brief CAN handle Structure definition
*/
typedef struct
{
CAN_TypeDef *Instance; /*!< Register base address */
CAN_InitTypeDef Init; /*!< CAN required parameters */
CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure for RX FIFO0 msg */
CanRxMsgTypeDef* pRx1Msg; /*!< Pointer to reception structure for RX FIFO1 msg */
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
HAL_LockTypeDef Lock; /*!< CAN locking object */
__IO uint32_t ErrorCode; /*!< CAN Error code */
}CAN_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CAN_Exported_Constants CAN Exported Constants
* @{
*/
/** @defgroup CAN_Error_Code CAN Error Code
* @{
*/
#define HAL_CAN_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_CAN_ERROR_EWG 0x00000001U /*!< EWG error */
#define HAL_CAN_ERROR_EPV 0x00000002U /*!< EPV error */
#define HAL_CAN_ERROR_BOF 0x00000004U /*!< BOF error */
#define HAL_CAN_ERROR_STF 0x00000008U /*!< Stuff error */
#define HAL_CAN_ERROR_FOR 0x00000010U /*!< Form error */
#define HAL_CAN_ERROR_ACK 0x00000020U /*!< Acknowledgment error */
#define HAL_CAN_ERROR_BR 0x00000040U /*!< Bit recessive */
#define HAL_CAN_ERROR_BD 0x00000080U /*!< LEC dominant */
#define HAL_CAN_ERROR_CRC 0x00000100U /*!< LEC transfer error */
#define HAL_CAN_ERROR_FOV0 0x00000200U /*!< FIFO0 overrun error */
#define HAL_CAN_ERROR_FOV1 0x00000400U /*!< FIFO1 overrun error */
#define HAL_CAN_ERROR_TXFAIL 0x00000800U /*!< Transmit failure */
/**
* @}
*/
/** @defgroup CAN_InitStatus CAN InitStatus
* @{
*/
#define CAN_INITSTATUS_FAILED ((uint8_t)0x00) /*!< CAN initialization failed */
#define CAN_INITSTATUS_SUCCESS ((uint8_t)0x01) /*!< CAN initialization OK */
/**
* @}
*/
/** @defgroup CAN_operating_mode CAN Operating Mode
* @{
*/
#define CAN_MODE_NORMAL 0x00000000U /*!< Normal mode */
#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
/**
* @}
*/
/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width
* @{
*/
#define CAN_SJW_1TQ 0x00000000U /*!< 1 time quantum */
#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
/**
* @}
*/
/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1
* @{
*/
#define CAN_BS1_1TQ 0x00000000U /*!< 1 time quantum */
#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
/**
* @}
*/
/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
* @{
*/
#define CAN_BS2_1TQ 0x00000000U /*!< 1 time quantum */
#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
/**
* @}
*/
/** @defgroup CAN_filter_mode CAN Filter Mode
* @{
*/
#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
/**
* @}
*/
/** @defgroup CAN_filter_scale CAN Filter Scale
* @{
*/
#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
/**
* @}
*/
/** @defgroup CAN_filter_FIFO CAN Filter FIFO
* @{
*/
#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
/**
* @}
*/
/** @defgroup CAN_Identifier_Type CAN Identifier Type
* @{
*/
#define CAN_ID_STD 0x00000000U /*!< Standard Id */
#define CAN_ID_EXT 0x00000004U /*!< Extended Id */
/**
* @}
*/
/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
* @{
*/
#define CAN_RTR_DATA 0x00000000U /*!< Data frame */
#define CAN_RTR_REMOTE 0x00000002U /*!< Remote frame */
/**
* @}
*/
/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants
* @{
*/
#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
/**
* @}
*/
/** @defgroup CAN_flags CAN Flags
* @{
*/
/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
and CAN_ClearFlag() functions. */
/* If the flag is 0x1XXXXXXX, it means that it can only be used with
CAN_GetFlagStatus() function. */
/* Transmit Flags */
#define CAN_FLAG_RQCP0 0x00000500U /*!< Request MailBox0 flag */
#define CAN_FLAG_RQCP1 0x00000508U /*!< Request MailBox1 flag */
#define CAN_FLAG_RQCP2 0x00000510U /*!< Request MailBox2 flag */
#define CAN_FLAG_TXOK0 0x00000501U /*!< Transmission OK MailBox0 flag */
#define CAN_FLAG_TXOK1 0x00000509U /*!< Transmission OK MailBox1 flag */
#define CAN_FLAG_TXOK2 0x00000511U /*!< Transmission OK MailBox2 flag */
#define CAN_FLAG_TME0 0x0000051AU /*!< Transmit mailbox 0 empty flag */
#define CAN_FLAG_TME1 0x0000051BU /*!< Transmit mailbox 0 empty flag */
#define CAN_FLAG_TME2 0x0000051CU /*!< Transmit mailbox 0 empty flag */
/* Receive Flags */
#define CAN_FLAG_FF0 0x00000203U /*!< FIFO 0 Full flag */
#define CAN_FLAG_FOV0 0x00000204U /*!< FIFO 0 Overrun flag */
#define CAN_FLAG_FF1 0x00000403U /*!< FIFO 1 Full flag */
#define CAN_FLAG_FOV1 0x00000404U /*!< FIFO 1 Overrun flag */
/* Operating Mode Flags */
#define CAN_FLAG_INAK 0x00000100U /*!< Initialization acknowledge flag */
#define CAN_FLAG_SLAK 0x00000101U /*!< Sleep acknowledge flag */
#define CAN_FLAG_ERRI 0x00000102U /*!< Error flag */
#define CAN_FLAG_WKU 0x00000103U /*!< Wake up flag */
#define CAN_FLAG_SLAKI 0x00000104U /*!< Sleep acknowledge flag */
/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
In this case the SLAK bit can be polled.*/
/* Error Flags */
#define CAN_FLAG_EWG 0x00000300U /*!< Error warning flag */
#define CAN_FLAG_EPV 0x00000301U /*!< Error passive flag */
#define CAN_FLAG_BOF 0x00000302U /*!< Bus-Off flag */
/**
* @}
*/
/** @defgroup CAN_Interrupts CAN Interrupts
* @{
*/
#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
/* Receive Interrupts */
#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
/* Operating Mode Interrupts */
#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
/* Error Interrupts */
#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
/**
* @}
*/
/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition
* @{
*/
#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup CAN_Exported_Macros CAN Exported Macros
* @{
*/
/** @brief Reset CAN handle state
* @param __HANDLE__ specifies the CAN Handle.
* @retval None
*/
#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
/**
* @brief Enable the specified CAN interrupts.
* @param __HANDLE__ CAN handle
* @param __INTERRUPT__ CAN Interrupt
* @retval None
*/
#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
/**
* @brief Disable the specified CAN interrupts.
* @param __HANDLE__ CAN handle
* @param __INTERRUPT__ CAN Interrupt
* @retval None
*/
#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
/**
* @brief Return the number of pending received messages.
* @param __HANDLE__ CAN handle
* @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
* @retval The number of pending message.
*/
#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
((uint8_t)((__HANDLE__)->Instance->RF0R&0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R & 0x03U)))
/** @brief Check whether the specified CAN flag is set or not.
* @param __HANDLE__ CAN Handle
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg CAN_TSR_RQCP0: Request MailBox0 Flag
* @arg CAN_TSR_RQCP1: Request MailBox1 Flag
* @arg CAN_TSR_RQCP2: Request MailBox2 Flag
* @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
* @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
* @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
* @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
* @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
* @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
* @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
* @arg CAN_FLAG_FF0: FIFO 0 Full Flag
* @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
* @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
* @arg CAN_FLAG_FF1: FIFO 1 Full Flag
* @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
* @arg CAN_FLAG_WKU: Wake up Flag
* @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
* @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
* @arg CAN_FLAG_EWG: Error Warning Flag
* @arg CAN_FLAG_EPV: Error Passive Flag
* @arg CAN_FLAG_BOF: Bus-Off Flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
/** @brief Clear the specified CAN pending flag.
* @param __HANDLE__ CAN Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg CAN_TSR_RQCP0: Request MailBox0 Flag
* @arg CAN_TSR_RQCP1: Request MailBox1 Flag
* @arg CAN_TSR_RQCP2: Request MailBox2 Flag
* @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
* @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
* @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
* @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
* @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
* @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
* @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
* @arg CAN_FLAG_FF0: FIFO 0 Full Flag
* @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
* @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
* @arg CAN_FLAG_FF1: FIFO 1 Full Flag
* @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
* @arg CAN_FLAG_WKU: Wake up Flag
* @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
* @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__HANDLE__)->Instance->MSR) = ((uint32_t)1U << ((__FLAG__) & CAN_FLAG_MASK))))
/** @brief Check if the specified CAN interrupt source is enabled or disabled.
* @param __HANDLE__ CAN Handle
* @param __INTERRUPT__ specifies the CAN interrupt source to check.
* This parameter can be one of the following values:
* @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
* @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable
* @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/**
* @brief Check the transmission status of a CAN Frame.
* @param __HANDLE__ CAN Handle
* @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission.
* @retval The new status of transmission (TRUE or FALSE).
*/
#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
/**
* @brief Release the specified receive FIFO.
* @param __HANDLE__ CAN handle
* @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
* @retval None
*/
#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1))
/**
* @brief Cancel a transmit request.
* @param __HANDLE__ CAN Handle
* @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission.
* @retval None
*/
#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\
((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ1) :\
((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2))
/**
* @brief Enable or disable the DBG Freeze for CAN.
* @param __HANDLE__ CAN Handle
* @param __NEWSTATE__ new state of the CAN peripheral.
* This parameter can be: ENABLE (CAN reception/transmission is frozen
* during debug. Reception FIFOs can still be accessed/controlled normally)
* or DISABLE (CAN is working during debug).
* @retval None
*/
#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup CAN_Exported_Functions
* @{
*/
/** @addtogroup CAN_Exported_Functions_Group1
* @{
*/
/* Initialization/de-initialization functions ***********************************/
HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
/**
* @}
*/
/** @addtogroup CAN_Exported_Functions_Group2
* @{
*/
/* I/O operation functions ******************************************************/
HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
/**
* @}
*/
/** @addtogroup CAN_Exported_Functions_Group3
* @{
*/
/* Peripheral State functions ***************************************************/
uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/** @defgroup CAN_Private_Types CAN Private Types
* @{
*/
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup CAN_Private_Variables CAN Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup CAN_Private_Constants CAN Private Constants
* @{
*/
#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
#define CAN_FLAG_MASK 0x000000FFU
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup CAN_Private_Macros CAN Private Macros
* @{
*/
#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
((MODE) == CAN_MODE_LOOPBACK)|| \
((MODE) == CAN_MODE_SILENT) || \
((MODE) == CAN_MODE_SILENT_LOOPBACK))
#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U)
#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
((MODE) == CAN_FILTERMODE_IDLIST))
#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
((SCALE) == CAN_FILTERSCALE_32BIT))
#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
((FIFO) == CAN_FILTER_FIFO1))
#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U)
#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FFU))
#define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU)
#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
((IDTYPE) == CAN_ID_EXT))
#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup CAN_Private_Functions CAN Private Functions
* @{
*/
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_CAN_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_cortex.h
* @author MCD Application Team
* @brief Header file of CORTEX HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_CORTEX_H
#define __STM32F4xx_HAL_CORTEX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup CORTEX
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
* @{
*/
#if (__MPU_PRESENT == 1U)
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
* @brief MPU Region initialization structure
* @{
*/
typedef struct
{
uint8_t Enable; /*!< Specifies the status of the region.
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
uint8_t Number; /*!< Specifies the number of the region to protect.
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
uint8_t Size; /*!< Specifies the size of the region to protect.
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
uint8_t TypeExtField; /*!< Specifies the TEX field level.
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
uint8_t AccessPermission; /*!< Specifies the region access permission type.
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
uint8_t DisableExec; /*!< Specifies the instruction access status.
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
}MPU_Region_InitTypeDef;
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
* @{
*/
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
* @{
*/
#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority
4 bits for subpriority */
#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority
3 bits for subpriority */
#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority
2 bits for subpriority */
#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority
1 bits for subpriority */
#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority
0 bits for subpriority */
/**
* @}
*/
/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
* @{
*/
#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U
#define SYSTICK_CLKSOURCE_HCLK 0x00000004U
/**
* @}
*/
#if (__MPU_PRESENT == 1)
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
* @{
*/
#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U
#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk
#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk
#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
* @{
*/
#define MPU_REGION_ENABLE ((uint8_t)0x01)
#define MPU_REGION_DISABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
* @{
*/
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
* @{
*/
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
* @{
*/
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
* @{
*/
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
* @{
*/
#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
* @{
*/
#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
* @{
*/
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
* @{
*/
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported Macros -----------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup CORTEX_Exported_Functions
* @{
*/
/** @addtogroup CORTEX_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
void HAL_NVIC_SystemReset(void);
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
/**
* @}
*/
/** @addtogroup CORTEX_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ***********************************************/
uint32_t HAL_NVIC_GetPriorityGrouping(void);
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
void HAL_SYSTICK_IRQHandler(void);
void HAL_SYSTICK_Callback(void);
#if (__MPU_PRESENT == 1U)
void HAL_MPU_Enable(uint32_t MPU_Control);
void HAL_MPU_Disable(void);
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
#endif /* __MPU_PRESENT */
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
* @{
*/
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
((GROUP) == NVIC_PRIORITYGROUP_1) || \
((GROUP) == NVIC_PRIORITYGROUP_2) || \
((GROUP) == NVIC_PRIORITYGROUP_3) || \
((GROUP) == NVIC_PRIORITYGROUP_4))
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
#if (__MPU_PRESENT == 1U)
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
((STATE) == MPU_REGION_DISABLE))
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
((TYPE) == MPU_TEX_LEVEL1) || \
((TYPE) == MPU_TEX_LEVEL2))
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
((TYPE) == MPU_REGION_PRIV_RW) || \
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
((TYPE) == MPU_REGION_FULL_ACCESS) || \
((TYPE) == MPU_REGION_PRIV_RO) || \
((TYPE) == MPU_REGION_PRIV_RO_URO))
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
((NUMBER) == MPU_REGION_NUMBER1) || \
((NUMBER) == MPU_REGION_NUMBER2) || \
((NUMBER) == MPU_REGION_NUMBER3) || \
((NUMBER) == MPU_REGION_NUMBER4) || \
((NUMBER) == MPU_REGION_NUMBER5) || \
((NUMBER) == MPU_REGION_NUMBER6) || \
((NUMBER) == MPU_REGION_NUMBER7))
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
((SIZE) == MPU_REGION_SIZE_64B) || \
((SIZE) == MPU_REGION_SIZE_128B) || \
((SIZE) == MPU_REGION_SIZE_256B) || \
((SIZE) == MPU_REGION_SIZE_512B) || \
((SIZE) == MPU_REGION_SIZE_1KB) || \
((SIZE) == MPU_REGION_SIZE_2KB) || \
((SIZE) == MPU_REGION_SIZE_4KB) || \
((SIZE) == MPU_REGION_SIZE_8KB) || \
((SIZE) == MPU_REGION_SIZE_16KB) || \
((SIZE) == MPU_REGION_SIZE_32KB) || \
((SIZE) == MPU_REGION_SIZE_64KB) || \
((SIZE) == MPU_REGION_SIZE_128KB) || \
((SIZE) == MPU_REGION_SIZE_256KB) || \
((SIZE) == MPU_REGION_SIZE_512KB) || \
((SIZE) == MPU_REGION_SIZE_1MB) || \
((SIZE) == MPU_REGION_SIZE_2MB) || \
((SIZE) == MPU_REGION_SIZE_4MB) || \
((SIZE) == MPU_REGION_SIZE_8MB) || \
((SIZE) == MPU_REGION_SIZE_16MB) || \
((SIZE) == MPU_REGION_SIZE_32MB) || \
((SIZE) == MPU_REGION_SIZE_64MB) || \
((SIZE) == MPU_REGION_SIZE_128MB) || \
((SIZE) == MPU_REGION_SIZE_256MB) || \
((SIZE) == MPU_REGION_SIZE_512MB) || \
((SIZE) == MPU_REGION_SIZE_1GB) || \
((SIZE) == MPU_REGION_SIZE_2GB) || \
((SIZE) == MPU_REGION_SIZE_4GB))
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF)
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_CORTEX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_dac.h
* @author MCD Application Team
* @brief Header file of DAC HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_DAC_H
#define __STM32F4xx_HAL_DAC_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup DAC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DAC_Exported_Types DAC Exported Types
* @{
*/
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */
HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */
HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */
HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */
HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */
}HAL_DAC_StateTypeDef;
/**
* @brief DAC handle Structure definition
*/
typedef struct
{
DAC_TypeDef *Instance; /*!< Register base address */
__IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
HAL_LockTypeDef Lock; /*!< DAC locking object */
DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
__IO uint32_t ErrorCode; /*!< DAC Error code */
}DAC_HandleTypeDef;
/**
* @brief DAC Configuration regular Channel structure definition
*/
typedef struct
{
uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
This parameter can be a value of @ref DAC_trigger_selection */
uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
This parameter can be a value of @ref DAC_output_buffer */
}DAC_ChannelConfTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DAC_Exported_Constants DAC Exported Constants
* @{
*/
/** @defgroup DAC_Error_Code DAC Error Code
* @{
*/
#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */
#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DAM underrun error */
#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DAM underrun error */
#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */
/**
* @}
*/
/** @defgroup DAC_trigger_selection DAC Trigger Selection
* @{
*/
#define DAC_TRIGGER_NONE 0x00000000U /*!< Conversion is automatic once the DAC1_DHRxxxx register
has been loaded, and not by external trigger */
#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_T8_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
/**
* @}
*/
/** @defgroup DAC_output_buffer DAC Output Buffer
* @{
*/
#define DAC_OUTPUTBUFFER_ENABLE 0x00000000U
#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
/**
* @}
*/
/** @defgroup DAC_Channel_selection DAC Channel Selection
* @{
*/
#define DAC_CHANNEL_1 0x00000000U
#define DAC_CHANNEL_2 0x00000010U
/**
* @}
*/
/** @defgroup DAC_data_alignment DAC Data Alignment
* @{
*/
#define DAC_ALIGN_12B_R 0x00000000U
#define DAC_ALIGN_12B_L 0x00000004U
#define DAC_ALIGN_8B_R 0x00000008U
/**
* @}
*/
/** @defgroup DAC_flags_definition DAC Flags Definition
* @{
*/
#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
/**
* @}
*/
/** @defgroup DAC_IT_definition DAC IT Definition
* @{
*/
#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup DAC_Exported_Macros DAC Exported Macros
* @{
*/
/** @brief Reset DAC handle state
* @param __HANDLE__ specifies the DAC handle.
* @retval None
*/
#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
/** @brief Enable the DAC channel
* @param __HANDLE__ specifies the DAC handle.
* @param __DAC_Channel__ specifies the DAC channel
* @retval None
*/
#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
/** @brief Disable the DAC channel
* @param __HANDLE__ specifies the DAC handle
* @param __DAC_Channel__ specifies the DAC channel.
* @retval None
*/
#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
/** @brief Enable the DAC interrupt
* @param __HANDLE__ specifies the DAC handle
* @param __INTERRUPT__ specifies the DAC interrupt.
* @retval None
*/
#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
/** @brief Disable the DAC interrupt
* @param __HANDLE__ specifies the DAC handle
* @param __INTERRUPT__ specifies the DAC interrupt.
* @retval None
*/
#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
/** @brief Checks if the specified DAC interrupt source is enabled or disabled.
* @param __HANDLE__ DAC handle
* @param __INTERRUPT__ DAC interrupt source to check
* This parameter can be any combination of the following values:
* @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
* @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
* @retval State of interruption (SET or RESET)
*/
#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Get the selected DAC's flag status.
* @param __HANDLE__ specifies the DAC handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
* @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
* @retval None
*/
#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clear the DAC's flag.
* @param __HANDLE__ specifies the DAC handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
* @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
* @retval None
*/
#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
/**
* @}
*/
/* Include DAC HAL Extension module */
#include "stm32f4xx_hal_dac_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DAC_Exported_Functions
* @{
*/
/** @addtogroup DAC_Exported_Functions_Group1
* @{
*/
/* Initialization/de-initialization functions *********************************/
HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
/**
* @}
*/
/** @addtogroup DAC_Exported_Functions_Group2
* @{
*/
/* I/O operation functions ****************************************************/
HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
/**
* @}
*/
/** @addtogroup DAC_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
/**
* @}
*/
/** @addtogroup DAC_Exported_Functions_Group4
* @{
*/
/* Peripheral State functions *************************************************/
HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup DAC_Private_Constants DAC Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup DAC_Private_Macros DAC Private Macros
* @{
*/
#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U)
#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
((ALIGN) == DAC_ALIGN_12B_L) || \
((ALIGN) == DAC_ALIGN_8B_R))
#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
((CHANNEL) == DAC_CHANNEL_2))
#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
((STATE) == DAC_OUTPUTBUFFER_DISABLE))
#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
((TRIGGER) == DAC_TRIGGER_SOFTWARE))
/** @brief Set DHR12R1 alignment
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008U + (__ALIGNMENT__))
/** @brief Set DHR12R2 alignment
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000014U) + (__ALIGNMENT__))
/** @brief Set DHR12RD alignment
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020U + (__ALIGNMENT__))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DAC_Private_Functions DAC Private Functions
* @{
*/
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx ||\
STM32F413xx || STM32F423xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_HAL_DAC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_dac.h
* @author MCD Application Team
* @brief Header file of DAC HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_DAC_EX_H
#define __STM32F4xx_HAL_DAC_EX_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup DACEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DACEx_Exported_Constants DAC Exported Constants
* @{
*/
/** @defgroup DACEx_lfsrunmask_triangleamplitude DAC LFS Run Mask Triangle Amplitude
* @{
*/
#define DAC_LFSRUNMASK_BIT0 0x00000000U /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
#define DAC_TRIANGLEAMPLITUDE_1 0x00000000U /*!< Select max triangle amplitude of 1 */
#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DACEx_Exported_Functions
* @{
*/
/** @addtogroup DACEx_Exported_Functions_Group1
* @{
*/
/* Extension features functions ***********************************************/
uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup DACEx_Private_Constants DAC Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup DACEx_Private_Macros DAC Private Macros
* @{
*/
#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DACEx_Private_Functions DAC Private Functions
* @{
*/
void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx ||\
STM32F413xx || STM32F423xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_HAL_DAC_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_def.h
* @author MCD Application Team
* @brief This file contains HAL common defines, enumeration, macros and
* structures definitions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_DEF
#define __STM32F4xx_HAL_DEF
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
#include "Legacy/stm32_hal_legacy.h"
#include <stdio.h>
/* Exported types ------------------------------------------------------------*/
/**
* @brief HAL Status structures definition
*/
typedef enum
{
HAL_OK = 0x00U,
HAL_ERROR = 0x01U,
HAL_BUSY = 0x02U,
HAL_TIMEOUT = 0x03U
} HAL_StatusTypeDef;
/**
* @brief HAL Lock structures definition
*/
typedef enum
{
HAL_UNLOCKED = 0x00U,
HAL_LOCKED = 0x01U
} HAL_LockTypeDef;
/* Exported macro ------------------------------------------------------------*/
#define HAL_MAX_DELAY 0xFFFFFFFFU
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
do{ \
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
(__DMA_HANDLE__).Parent = (__HANDLE__); \
} while(0)
#define UNUSED(x) ((void)(x))
/** @brief Reset the Handle's State field.
* @param __HANDLE__ specifies the Peripheral Handle.
* @note This macro can be used for the following purpose:
* - When the Handle is declared as local variable; before passing it as parameter
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
* to set to 0 the Handle's "State" field.
* Otherwise, "State" field may have any random value and the first time the function
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
* (i.e. HAL_PPP_MspInit() will not be executed).
* - When there is a need to reconfigure the low level hardware: instead of calling
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
* @retval None
*/
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
#if (USE_RTOS == 1U)
/* Reserved for future use */
#error "USE_RTOS should be 0 in the current HAL release"
#else
#define __HAL_LOCK(__HANDLE__) \
do{ \
if((__HANDLE__)->Lock == HAL_LOCKED) \
{ \
return HAL_BUSY; \
} \
else \
{ \
(__HANDLE__)->Lock = HAL_LOCKED; \
} \
}while (0U)
#define __HAL_UNLOCK(__HANDLE__) \
do{ \
(__HANDLE__)->Lock = HAL_UNLOCKED; \
}while (0U)
#endif /* USE_RTOS */
#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __weak
#define __weak __attribute__((weak))
#endif /* __weak */
#ifndef __packed
#define __packed __attribute__((__packed__))
#endif /* __packed */
#endif /* __GNUC__ */
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4)))
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#define __ALIGN_BEGIN
#endif /* __ALIGN_BEGIN */
#else
#ifndef __ALIGN_END
#define __ALIGN_END
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#if defined (__CC_ARM) /* ARM Compiler */
#define __ALIGN_BEGIN __align(4)
#elif defined (__ICCARM__) /* IAR Compiler */
#define __ALIGN_BEGIN
#endif /* __CC_ARM */
#endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */
/**
* @brief __RAM_FUNC definition
*/
#if defined ( __CC_ARM )
/* ARM Compiler
------------
RAM functions are defined using the toolchain options.
Functions that are executed in RAM should reside in a separate source module.
Using the 'Options for File' dialog you can simply change the 'Code / Const'
area of a module to a memory space in physical RAM.
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
dialog.
*/
#define __RAM_FUNC HAL_StatusTypeDef
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
RAM functions are defined using a specific toolchain keyword "__ramfunc".
*/
#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
#elif defined ( __GNUC__ )
/* GNU Compiler
------------
RAM functions are defined using a specific toolchain attribute
"__attribute__((section(".RamFunc")))".
*/
#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc")))
#endif
/**
* @brief __NOINLINE definition
*/
#if defined ( __CC_ARM ) || defined ( __GNUC__ )
/* ARM & GNUCompiler
----------------
*/
#define __NOINLINE __attribute__ ( (noinline) )
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
*/
#define __NOINLINE _Pragma("optimize = no_inline")
#endif
#ifdef __cplusplus
}
#endif
#endif /* ___STM32F4xx_HAL_DEF */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_dma.h
* @author MCD Application Team
* @brief Header file of DMA HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_DMA_H
#define __STM32F4xx_HAL_DMA_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup DMA
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DMA_Exported_Types DMA Exported Types
* @brief DMA Exported Types
* @{
*/
/**
* @brief DMA Configuration Structure definition
*/
typedef struct
{
uint32_t Channel; /*!< Specifies the channel used for the specified stream.
This parameter can be a value of @ref DMA_Channel_selection */
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
from memory to memory or from peripheral to memory.
This parameter can be a value of @ref DMA_Data_transfer_direction */
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
This parameter can be a value of @ref DMA_Memory_incremented_mode */
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
This parameter can be a value of @ref DMA_Peripheral_data_size */
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
This parameter can be a value of @ref DMA_Memory_data_size */
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
This parameter can be a value of @ref DMA_mode
@note The circular buffer mode cannot be used if the memory-to-memory
data transfer is configured on the selected Stream */
uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
This parameter can be a value of @ref DMA_Priority_level */
uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
This parameter can be a value of @ref DMA_FIFO_direct_mode
@note The Direct mode (FIFO mode disabled) cannot be used if the
memory-to-memory data transfer is configured on the selected stream */
uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
This parameter can be a value of @ref DMA_FIFO_threshold_level */
uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
It specifies the amount of data to be transferred in a single non interruptible
transaction.
This parameter can be a value of @ref DMA_Memory_burst
@note The burst mode is possible only if the address Increment mode is enabled. */
uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
It specifies the amount of data to be transferred in a single non interruptible
transaction.
This parameter can be a value of @ref DMA_Peripheral_burst
@note The burst mode is possible only if the address Increment mode is enabled. */
}DMA_InitTypeDef;
/**
* @brief HAL DMA State structures definition
*/
typedef enum
{
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */
HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */
}HAL_DMA_StateTypeDef;
/**
* @brief HAL DMA Error Code structure definition
*/
typedef enum
{
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
}HAL_DMA_LevelCompleteTypeDef;
/**
* @brief HAL DMA Error Code structure definition
*/
typedef enum
{
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */
HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */
HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */
HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */
}HAL_DMA_CallbackIDTypeDef;
/**
* @brief DMA handle Structure definition
*/
typedef struct __DMA_HandleTypeDef
{
DMA_Stream_TypeDef *Instance; /*!< Register base address */
DMA_InitTypeDef Init; /*!< DMA communication parameters */
HAL_LockTypeDef Lock; /*!< DMA locking object */
__IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
void *Parent; /*!< Parent object state */
void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */
void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */
__IO uint32_t ErrorCode; /*!< DMA Error code */
uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */
uint32_t StreamIndex; /*!< DMA Stream Index */
}DMA_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA_Exported_Constants DMA Exported Constants
* @brief DMA Exported constants
* @{
*/
/** @defgroup DMA_Error_Code DMA Error Code
* @brief DMA Error Code
* @{
*/
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */
#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */
#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
/**
* @}
*/
/** @defgroup DMA_Channel_selection DMA Channel selection
* @brief DMA channel selection
* @{
*/
#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */
#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */
#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */
#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */
#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */
#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */
#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */
#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */
#if defined (DMA_SxCR_CHSEL_3)
#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */
#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */
#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10 */
#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11 */
#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12 */
#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13 */
#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14 */
#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15 */
#endif /* DMA_SxCR_CHSEL_3 */
/**
* @}
*/
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
* @brief DMA data transfer direction
* @{
*/
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */
#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */
/**
* @}
*/
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
* @brief DMA peripheral incremented mode
* @{
*/
#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */
/**
* @}
*/
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
* @brief DMA memory incremented mode
* @{
*/
#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */
/**
* @}
*/
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
* @brief DMA peripheral data size
* @{
*/
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */
/**
* @}
*/
/** @defgroup DMA_Memory_data_size DMA Memory data size
* @brief DMA memory data size
* @{
*/
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */
/**
* @}
*/
/** @defgroup DMA_mode DMA mode
* @brief DMA mode
* @{
*/
#define DMA_NORMAL 0x00000000U /*!< Normal mode */
#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */
#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */
/**
* @}
*/
/** @defgroup DMA_Priority_level DMA Priority level
* @brief DMA priority levels
* @{
*/
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */
#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */
#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */
#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */
/**
* @}
*/
/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
* @brief DMA FIFO direct mode
* @{
*/
#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */
/**
* @}
*/
/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
* @brief DMA FIFO level
* @{
*/
#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */
#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */
#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */
#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */
/**
* @}
*/
/** @defgroup DMA_Memory_burst DMA Memory burst
* @brief DMA memory burst
* @{
*/
#define DMA_MBURST_SINGLE 0x00000000U
#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0)
#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1)
#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST)
/**
* @}
*/
/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
* @brief DMA peripheral burst
* @{
*/
#define DMA_PBURST_SINGLE 0x00000000U
#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0)
#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1)
#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST)
/**
* @}
*/
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
* @brief DMA interrupts definition
* @{
*/
#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE)
#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE)
#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE)
#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE)
#define DMA_IT_FE 0x00000080U
/**
* @}
*/
/** @defgroup DMA_flag_definitions DMA flag definitions
* @brief DMA flag definitions
* @{
*/
#define DMA_FLAG_FEIF0_4 0x00000001U
#define DMA_FLAG_DMEIF0_4 0x00000004U
#define DMA_FLAG_TEIF0_4 0x00000008U
#define DMA_FLAG_HTIF0_4 0x00000010U
#define DMA_FLAG_TCIF0_4 0x00000020U
#define DMA_FLAG_FEIF1_5 0x00000040U
#define DMA_FLAG_DMEIF1_5 0x00000100U
#define DMA_FLAG_TEIF1_5 0x00000200U
#define DMA_FLAG_HTIF1_5 0x00000400U
#define DMA_FLAG_TCIF1_5 0x00000800U
#define DMA_FLAG_FEIF2_6 0x00010000U
#define DMA_FLAG_DMEIF2_6 0x00040000U
#define DMA_FLAG_TEIF2_6 0x00080000U
#define DMA_FLAG_HTIF2_6 0x00100000U
#define DMA_FLAG_TCIF2_6 0x00200000U
#define DMA_FLAG_FEIF3_7 0x00400000U
#define DMA_FLAG_DMEIF3_7 0x01000000U
#define DMA_FLAG_TEIF3_7 0x02000000U
#define DMA_FLAG_HTIF3_7 0x04000000U
#define DMA_FLAG_TCIF3_7 0x08000000U
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @brief Reset DMA handle state
* @param __HANDLE__ specifies the DMA handle.
* @retval None
*/
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
/**
* @brief Return the current DMA Stream FIFO filled level.
* @param __HANDLE__ DMA handle
* @retval The FIFO filling state.
* - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
* and not empty.
* - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
* - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
* - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
* - DMA_FIFOStatus_Empty: when FIFO is empty
* - DMA_FIFOStatus_Full: when FIFO is full
*/
#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
/**
* @brief Enable the specified DMA Stream.
* @param __HANDLE__ DMA handle
* @retval None
*/
#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
/**
* @brief Disable the specified DMA Stream.
* @param __HANDLE__ DMA handle
* @retval None
*/
#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
/* Interrupt & Flag management */
/**
* @brief Return the current DMA Stream transfer complete flag.
* @param __HANDLE__ DMA handle
* @retval The specified transfer complete flag index.
*/
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
DMA_FLAG_TCIF3_7)
/**
* @brief Return the current DMA Stream half transfer complete flag.
* @param __HANDLE__ DMA handle
* @retval The specified half transfer complete flag index.
*/
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
DMA_FLAG_HTIF3_7)
/**
* @brief Return the current DMA Stream transfer error flag.
* @param __HANDLE__ DMA handle
* @retval The specified transfer error flag index.
*/
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
DMA_FLAG_TEIF3_7)
/**
* @brief Return the current DMA Stream FIFO error flag.
* @param __HANDLE__ DMA handle
* @retval The specified FIFO error flag index.
*/
#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
DMA_FLAG_FEIF3_7)
/**
* @brief Return the current DMA Stream direct mode error flag.
* @param __HANDLE__ DMA handle
* @retval The specified direct mode error flag index.
*/
#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
DMA_FLAG_DMEIF3_7)
/**
* @brief Get the DMA Stream pending flags.
* @param __HANDLE__ DMA handle
* @param __FLAG__ Get the specified flag.
* This parameter can be any combination of the following values:
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
* @arg DMA_FLAG_TEIFx: Transfer error flag.
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
* @arg DMA_FLAG_FEIFx: FIFO error flag.
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
* @retval The state of FLAG (SET or RESET).
*/
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
/**
* @brief Clear the DMA Stream pending flags.
* @param __HANDLE__ DMA handle
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
* @arg DMA_FLAG_TEIFx: Transfer error flag.
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
* @arg DMA_FLAG_FEIFx: FIFO error flag.
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
* @retval None
*/
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
/**
* @brief Enable the specified DMA Stream interrupts.
* @param __HANDLE__ DMA handle
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask.
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
* @arg DMA_IT_TE: Transfer error interrupt mask.
* @arg DMA_IT_FE: FIFO error interrupt mask.
* @arg DMA_IT_DME: Direct mode error interrupt.
* @retval None
*/
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
/**
* @brief Disable the specified DMA Stream interrupts.
* @param __HANDLE__ DMA handle
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask.
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
* @arg DMA_IT_TE: Transfer error interrupt mask.
* @arg DMA_IT_FE: FIFO error interrupt mask.
* @arg DMA_IT_DME: Direct mode error interrupt.
* @retval None
*/
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
/**
* @brief Check whether the specified DMA Stream interrupt is enabled or disabled.
* @param __HANDLE__ DMA handle
* @param __INTERRUPT__ specifies the DMA interrupt source to check.
* This parameter can be one of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask.
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
* @arg DMA_IT_TE: Transfer error interrupt mask.
* @arg DMA_IT_FE: FIFO error interrupt mask.
* @arg DMA_IT_DME: Direct mode error interrupt.
* @retval The state of DMA_IT.
*/
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
/**
* @brief Writes the number of data units to be transferred on the DMA Stream.
* @param __HANDLE__ DMA handle
* @param __COUNTER__ Number of data units to be transferred (from 0 to 65535)
* Number of data items depends only on the Peripheral data format.
*
* @note If Peripheral data format is Bytes: number of data units is equal
* to total number of bytes to be transferred.
*
* @note If Peripheral data format is Half-Word: number of data units is
* equal to total number of bytes to be transferred / 2.
*
* @note If Peripheral data format is Word: number of data units is equal
* to total number of bytes to be transferred / 4.
*
* @retval The number of remaining data units in the current DMAy Streamx transfer.
*/
#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
/**
* @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
* @param __HANDLE__ DMA handle
*
* @retval The number of remaining data units in the current DMA Stream transfer.
*/
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
/* Include DMA HAL Extension module */
#include "stm32f4xx_hal_dma_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @defgroup DMA_Exported_Functions DMA Exported Functions
* @brief DMA Exported functions
* @{
*/
/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and de-initialization functions
* @{
*/
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
* @brief I/O operation functions
* @{
*/
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_CleanCallbacks(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
/**
* @}
*/
/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
* @brief Peripheral State functions
* @{
*/
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/**
* @}
*/
/* Private Constants -------------------------------------------------------------*/
/** @defgroup DMA_Private_Constants DMA Private Constants
* @brief DMA private defines and constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup DMA_Private_Macros DMA Private Macros
* @brief DMA private macros
* @{
*/
#if defined (DMA_SxCR_CHSEL_3)
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
((CHANNEL) == DMA_CHANNEL_1) || \
((CHANNEL) == DMA_CHANNEL_2) || \
((CHANNEL) == DMA_CHANNEL_3) || \
((CHANNEL) == DMA_CHANNEL_4) || \
((CHANNEL) == DMA_CHANNEL_5) || \
((CHANNEL) == DMA_CHANNEL_6) || \
((CHANNEL) == DMA_CHANNEL_7) || \
((CHANNEL) == DMA_CHANNEL_8) || \
((CHANNEL) == DMA_CHANNEL_9) || \
((CHANNEL) == DMA_CHANNEL_10)|| \
((CHANNEL) == DMA_CHANNEL_11)|| \
((CHANNEL) == DMA_CHANNEL_12)|| \
((CHANNEL) == DMA_CHANNEL_13)|| \
((CHANNEL) == DMA_CHANNEL_14)|| \
((CHANNEL) == DMA_CHANNEL_15))
#else
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
((CHANNEL) == DMA_CHANNEL_1) || \
((CHANNEL) == DMA_CHANNEL_2) || \
((CHANNEL) == DMA_CHANNEL_3) || \
((CHANNEL) == DMA_CHANNEL_4) || \
((CHANNEL) == DMA_CHANNEL_5) || \
((CHANNEL) == DMA_CHANNEL_6) || \
((CHANNEL) == DMA_CHANNEL_7))
#endif /* DMA_SxCR_CHSEL_3 */
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
((STATE) == DMA_PINC_DISABLE))
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
((STATE) == DMA_MINC_DISABLE))
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
((SIZE) == DMA_PDATAALIGN_WORD))
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
((SIZE) == DMA_MDATAALIGN_WORD ))
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
((MODE) == DMA_CIRCULAR) || \
((MODE) == DMA_PFCTRL))
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
((PRIORITY) == DMA_PRIORITY_HIGH) || \
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
((STATE) == DMA_FIFOMODE_ENABLE))
#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
((BURST) == DMA_MBURST_INC4) || \
((BURST) == DMA_MBURST_INC8) || \
((BURST) == DMA_MBURST_INC16))
#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
((BURST) == DMA_PBURST_INC4) || \
((BURST) == DMA_PBURST_INC8) || \
((BURST) == DMA_PBURST_INC16))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DMA_Private_Functions DMA Private Functions
* @brief DMA private functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_DMA_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_dma_ex.h
* @author MCD Application Team
* @brief Header file of DMA HAL extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_DMA_EX_H
#define __STM32F4xx_HAL_DMA_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup DMAEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
* @brief DMAEx Exported types
* @{
*/
/**
* @brief HAL DMA Memory definition
*/
typedef enum
{
MEMORY0 = 0x00U, /*!< Memory 0 */
MEMORY1 = 0x01U /*!< Memory 1 */
}HAL_DMA_MemoryTypeDef;
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
* @brief DMAEx Exported functions
* @{
*/
/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
* @brief Extended features functions
* @{
*/
/* IO operation functions *******************************************************/
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
* @brief DMAEx Private functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_HAL_DMA_EX_H*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_flash.h
* @author MCD Application Team
* @brief Header file of FLASH HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_FLASH_H
#define __STM32F4xx_HAL_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Types FLASH Exported Types
* @{
*/
/**
* @brief FLASH Procedure structure definition
*/
typedef enum
{
FLASH_PROC_NONE = 0U,
FLASH_PROC_SECTERASE,
FLASH_PROC_MASSERASE,
FLASH_PROC_PROGRAM
} FLASH_ProcedureTypeDef;
/**
* @brief FLASH handle Structure definition
*/
typedef struct
{
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
__IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
__IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
__IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
__IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
__IO uint32_t Address; /*Internal variable to save address selected for program*/
HAL_LockTypeDef Lock; /* FLASH locking object */
__IO uint32_t ErrorCode; /* FLASH error code */
}FLASH_ProcessTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASH_Error_Code FLASH Error Code
* @brief FLASH Error Code
* @{
*/
#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */
#define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */
#define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */
#define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */
#define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */
#define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */
/**
* @}
*/
/** @defgroup FLASH_Type_Program FLASH Type Program
* @{
*/
#define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */
#define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */
#define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */
#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */
/**
* @}
*/
/** @defgroup FLASH_Flag_definition FLASH Flag definition
* @brief Flag definition
* @{
*/
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
#if defined(FLASH_SR_RDERR)
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */
#endif /* FLASH_SR_RDERR */
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
/**
* @}
*/
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
* @brief FLASH Interrupt definition
* @{
*/
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */
/**
* @}
*/
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
* @{
*/
#define FLASH_PSIZE_BYTE 0x00000000U
#define FLASH_PSIZE_HALF_WORD 0x00000100U
#define FLASH_PSIZE_WORD 0x00000200U
#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U
#define CR_PSIZE_MASK 0xFFFFFCFFU
/**
* @}
*/
/** @defgroup FLASH_Keys FLASH Keys
* @{
*/
#define RDP_KEY ((uint16_t)0x00A5)
#define FLASH_KEY1 0x45670123U
#define FLASH_KEY2 0xCDEF89ABU
#define FLASH_OPT_KEY1 0x08192A3BU
#define FLASH_OPT_KEY2 0x4C5D6E7FU
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
* @{
*/
/**
* @brief Set the FLASH Latency.
* @param __LATENCY__ FLASH Latency
* The value of this parameter depend on device used within the same series
* @retval none
*/
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
/**
* @brief Get the FLASH Latency.
* @retval FLASH Latency
* The value of this parameter depend on device used within the same series
*/
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
/**
* @brief Enable the FLASH prefetch buffer.
* @retval none
*/
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
/**
* @brief Disable the FLASH prefetch buffer.
* @retval none
*/
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
/**
* @brief Enable the FLASH instruction cache.
* @retval none
*/
#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
/**
* @brief Disable the FLASH instruction cache.
* @retval none
*/
#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
/**
* @brief Enable the FLASH data cache.
* @retval none
*/
#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
/**
* @brief Disable the FLASH data cache.
* @retval none
*/
#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
/**
* @brief Resets the FLASH instruction Cache.
* @note This function must be used only when the Instruction Cache is disabled.
* @retval None
*/
#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
FLASH->ACR &= ~FLASH_ACR_ICRST; \
}while(0U)
/**
* @brief Resets the FLASH data Cache.
* @note This function must be used only when the data Cache is disabled.
* @retval None
*/
#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
FLASH->ACR &= ~FLASH_ACR_DCRST; \
}while(0U)
/**
* @brief Enable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
* @arg FLASH_IT_ERR: Error Interrupt
* @retval none
*/
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
/**
* @brief Disable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
* @arg FLASH_IT_ERR: Error Interrupt
* @retval none
*/
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
/**
* @brief Get the specified FLASH flag status.
* @param __FLAG__ specifies the FLASH flags to check.
* This parameter can be any combination of the following values:
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
* @arg FLASH_FLAG_BSY : FLASH Busy flag
* (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
/**
* @brief Clear the specified FLASH flags.
* @param __FLAG__ specifies the FLASH flags to clear.
* This parameter can be any combination of the following values:
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
* (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
* @retval none
*/
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
/**
* @}
*/
/* Include FLASH HAL Extension module */
#include "stm32f4xx_hal_flash_ex.h"
#include "stm32f4xx_hal_flash_ramfunc.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASH_Exported_Functions
* @{
*/
/** @addtogroup FLASH_Exported_Functions_Group1
* @{
*/
/* Program operation functions ***********************************************/
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
/* FLASH IRQ handler method */
void HAL_FLASH_IRQHandler(void);
/* Callbacks in non blocking modes */
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
/**
* @}
*/
/** @addtogroup FLASH_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions **********************************************/
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_Lock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
/* Option bytes control */
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
/**
* @}
*/
/** @addtogroup FLASH_Exported_Functions_Group3
* @{
*/
/* Peripheral State functions ************************************************/
uint32_t HAL_FLASH_GetError(void);
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Variables FLASH Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Constants FLASH Private Constants
* @{
*/
/**
* @brief ACR register byte 0 (Bits[7:0]) base address
*/
#define ACR_BYTE0_ADDRESS 0x40023C00U
/**
* @brief OPTCR register byte 0 (Bits[7:0]) base address
*/
#define OPTCR_BYTE0_ADDRESS 0x40023C14U
/**
* @brief OPTCR register byte 1 (Bits[15:8]) base address
*/
#define OPTCR_BYTE1_ADDRESS 0x40023C15U
/**
* @brief OPTCR register byte 2 (Bits[23:16]) base address
*/
#define OPTCR_BYTE2_ADDRESS 0x40023C16U
/**
* @brief OPTCR register byte 3 (Bits[31:24]) base address
*/
#define OPTCR_BYTE3_ADDRESS 0x40023C17U
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASH_Private_Macros FLASH Private Macros
* @{
*/
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
* @{
*/
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Functions FLASH Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_FLASH_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_flash_ex.h
* @author MCD Application Team
* @brief Header file of FLASH HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_FLASH_EX_H
#define __STM32F4xx_HAL_FLASH_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup FLASHEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
* @{
*/
/**
* @brief FLASH Erase structure definition
*/
typedef struct
{
uint32_t TypeErase; /*!< Mass erase or sector Erase.
This parameter can be a value of @ref FLASHEx_Type_Erase */
uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
This parameter must be a value of @ref FLASHEx_Banks */
uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
This parameter must be a value of @ref FLASHEx_Sectors */
uint32_t NbSectors; /*!< Number of sectors to be erased.
This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
This parameter must be a value of @ref FLASHEx_Voltage_Range */
} FLASH_EraseInitTypeDef;
/**
* @brief FLASH Option Bytes Program structure definition
*/
typedef struct
{
uint32_t OptionType; /*!< Option byte to be configured.
This parameter can be a value of @ref FLASHEx_Option_Type */
uint32_t WRPState; /*!< Write protection activation or deactivation.
This parameter can be a value of @ref FLASHEx_WRP_State */
uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
The value of this parameter depend on device used within the same series */
uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
This parameter must be a value of @ref FLASHEx_Banks */
uint32_t RDPLevel; /*!< Set the read protection level.
This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
uint32_t BORLevel; /*!< Set the BOR Level.
This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
} FLASH_OBProgramInitTypeDef;
/**
* @brief FLASH Advanced Option Bytes Program structure definition
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
typedef struct
{
uint32_t OptionType; /*!< Option byte to be configured for extension.
This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */
uint32_t PCROPState; /*!< PCROP activation or deactivation.
This parameter can be a value of @ref FLASHEx_PCROP_State */
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
uint16_t Sectors; /*!< specifies the sector(s) set for PCROP.
This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\
STM32F412Cx || STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors.
This parameter must be a value of @ref FLASHEx_Banks */
uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1.
This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2.
This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
This parameter can be a value of @ref FLASHEx_Dual_Boot */
#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
}FLASH_AdvOBProgramInitTypeDef;
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx ||
STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
* @{
*/
#define FLASH_TYPEERASE_SECTORS 0x00000000U /*!< Sectors erase only */
#define FLASH_TYPEERASE_MASSERASE 0x00000001U /*!< Flash Mass erase activation */
/**
* @}
*/
/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
* @{
*/
#define FLASH_VOLTAGE_RANGE_1 0x00000000U /*!< Device operating range: 1.8V to 2.1V */
#define FLASH_VOLTAGE_RANGE_2 0x00000001U /*!< Device operating range: 2.1V to 2.7V */
#define FLASH_VOLTAGE_RANGE_3 0x00000002U /*!< Device operating range: 2.7V to 3.6V */
#define FLASH_VOLTAGE_RANGE_4 0x00000003U /*!< Device operating range: 2.7V to 3.6V + External Vpp */
/**
* @}
*/
/** @defgroup FLASHEx_WRP_State FLASH WRP State
* @{
*/
#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired bank 1 sectors */
#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired bank 1 sectors */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Type FLASH Option Type
* @{
*/
#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */
#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */
#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */
#define OPTIONBYTE_BOR 0x00000008U /*!< BOR option byte configuration */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
* @{
*/
#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
#define OB_RDP_LEVEL_1 ((uint8_t)0x55)
#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2
it s no more possible to go back to level 1 or 0 */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
* @{
*/
#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */
#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
* @{
*/
#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
* @{
*/
#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
/**
* @}
*/
/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
* @{
*/
#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
/**
* @}
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
/** @defgroup FLASHEx_PCROP_State FLASH PCROP State
* @{
*/
#define OB_PCROP_STATE_DISABLE 0x00000000U /*!< Disable PCROP */
#define OB_PCROP_STATE_ENABLE 0x00000001U /*!< Enable PCROP */
/**
* @}
*/
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type
* @{
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define OPTIONBYTE_PCROP 0x00000001U /*!< PCROP option byte configuration */
#define OPTIONBYTE_BOOTCONFIG 0x00000002U /*!< BOOTConfig option byte configuration */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
#define OPTIONBYTE_PCROP 0x00000001U /*!<PCROP option byte configuration */
#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
STM32F413xx || STM32F423xx */
/**
* @}
*/
/** @defgroup FLASH_Latency FLASH Latency
* @{
*/
/*------------------------- STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx ----------------------*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
/*--------------------------------------------------------------------------------------------------------------*/
/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx/STM32F423xx -----------------------*/
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
STM32F413xx || STM32F423xx */
/*--------------------------------------------------------------------------------------------------------------*/
/**
* @}
*/
/** @defgroup FLASHEx_Banks FLASH Banks
* @{
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define FLASH_BANK_1 1U /*!< Bank 1 */
#define FLASH_BANK_2 2U /*!< Bank 2 */
#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
#define FLASH_BANK_1 1U /*!< Bank 1 */
#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx
STM32F413xx || STM32F423xx */
/**
* @}
*/
/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
* @{
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits here to clear */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER Bit */
#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx
STM32F413xx || STM32F423xx */
/**
* @}
*/
/** @defgroup FLASHEx_Sectors FLASH Sectors
* @{
*/
/*-------------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx ------------------------------------*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */
#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */
#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */
#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */
#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */
#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */
#define FLASH_SECTOR_6 6U /*!< Sector Number 6 */
#define FLASH_SECTOR_7 7U /*!< Sector Number 7 */
#define FLASH_SECTOR_8 8U /*!< Sector Number 8 */
#define FLASH_SECTOR_9 9U /*!< Sector Number 9 */
#define FLASH_SECTOR_10 10U /*!< Sector Number 10 */
#define FLASH_SECTOR_11 11U /*!< Sector Number 11 */
#define FLASH_SECTOR_12 12U /*!< Sector Number 12 */
#define FLASH_SECTOR_13 13U /*!< Sector Number 13 */
#define FLASH_SECTOR_14 14U /*!< Sector Number 14 */
#define FLASH_SECTOR_15 15U /*!< Sector Number 15 */
#define FLASH_SECTOR_16 16U /*!< Sector Number 16 */
#define FLASH_SECTOR_17 17U /*!< Sector Number 17 */
#define FLASH_SECTOR_18 18U /*!< Sector Number 18 */
#define FLASH_SECTOR_19 19U /*!< Sector Number 19 */
#define FLASH_SECTOR_20 20U /*!< Sector Number 20 */
#define FLASH_SECTOR_21 21U /*!< Sector Number 21 */
#define FLASH_SECTOR_22 22U /*!< Sector Number 22 */
#define FLASH_SECTOR_23 23U /*!< Sector Number 23 */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
/*-----------------------------------------------------------------------------------------------------*/
/*-------------------------------------- STM32F413xx/STM32F423xx --------------------------------------*/
#if defined(STM32F413xx) || defined(STM32F423xx)
#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */
#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */
#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */
#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */
#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */
#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */
#define FLASH_SECTOR_6 6U /*!< Sector Number 6 */
#define FLASH_SECTOR_7 7U /*!< Sector Number 7 */
#define FLASH_SECTOR_8 8U /*!< Sector Number 8 */
#define FLASH_SECTOR_9 9U /*!< Sector Number 9 */
#define FLASH_SECTOR_10 10U /*!< Sector Number 10 */
#define FLASH_SECTOR_11 11U /*!< Sector Number 11 */
#define FLASH_SECTOR_12 12U /*!< Sector Number 12 */
#define FLASH_SECTOR_13 13U /*!< Sector Number 13 */
#define FLASH_SECTOR_14 14U /*!< Sector Number 14 */
#define FLASH_SECTOR_15 15U /*!< Sector Number 15 */
#endif /* STM32F413xx || STM32F423xx */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */
#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */
#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */
#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */
#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */
#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */
#define FLASH_SECTOR_6 6U /*!< Sector Number 6 */
#define FLASH_SECTOR_7 7U /*!< Sector Number 7 */
#define FLASH_SECTOR_8 8U /*!< Sector Number 8 */
#define FLASH_SECTOR_9 9U /*!< Sector Number 9 */
#define FLASH_SECTOR_10 10U /*!< Sector Number 10 */
#define FLASH_SECTOR_11 11U /*!< Sector Number 11 */
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------------- STM32F401xC -------------------------------------------*/
#if defined(STM32F401xC)
#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */
#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */
#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */
#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */
#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */
#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */
#endif /* STM32F401xC */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------------- STM32F410xx -------------------------------------------*/
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */
#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */
#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */
#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */
#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
/*-----------------------------------------------------------------------------------------------------*/
/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/
#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */
#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */
#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */
#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */
#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */
#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */
#define FLASH_SECTOR_6 6U /*!< Sector Number 6 */
#define FLASH_SECTOR_7 7U /*!< Sector Number 7 */
#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
/*-----------------------------------------------------------------------------------------------------*/
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
* @{
*/
/*--------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx -------------------------*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */
#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */
#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */
#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */
#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */
#define OB_WRP_SECTOR_5 0x00000020U /*!< Write protection of Sector5 */
#define OB_WRP_SECTOR_6 0x00000040U /*!< Write protection of Sector6 */
#define OB_WRP_SECTOR_7 0x00000080U /*!< Write protection of Sector7 */
#define OB_WRP_SECTOR_8 0x00000100U /*!< Write protection of Sector8 */
#define OB_WRP_SECTOR_9 0x00000200U /*!< Write protection of Sector9 */
#define OB_WRP_SECTOR_10 0x00000400U /*!< Write protection of Sector10 */
#define OB_WRP_SECTOR_11 0x00000800U /*!< Write protection of Sector11 */
#define OB_WRP_SECTOR_12 0x00000001U << 12U /*!< Write protection of Sector12 */
#define OB_WRP_SECTOR_13 0x00000002U << 12U /*!< Write protection of Sector13 */
#define OB_WRP_SECTOR_14 0x00000004U << 12U /*!< Write protection of Sector14 */
#define OB_WRP_SECTOR_15 0x00000008U << 12U /*!< Write protection of Sector15 */
#define OB_WRP_SECTOR_16 0x00000010U << 12U /*!< Write protection of Sector16 */
#define OB_WRP_SECTOR_17 0x00000020U << 12U /*!< Write protection of Sector17 */
#define OB_WRP_SECTOR_18 0x00000040U << 12U /*!< Write protection of Sector18 */
#define OB_WRP_SECTOR_19 0x00000080U << 12U /*!< Write protection of Sector19 */
#define OB_WRP_SECTOR_20 0x00000100U << 12U /*!< Write protection of Sector20 */
#define OB_WRP_SECTOR_21 0x00000200U << 12U /*!< Write protection of Sector21 */
#define OB_WRP_SECTOR_22 0x00000400U << 12U /*!< Write protection of Sector22 */
#define OB_WRP_SECTOR_23 0x00000800U << 12U /*!< Write protection of Sector23 */
#define OB_WRP_SECTOR_All 0x00000FFFU << 12U /*!< Write protection of all Sectors */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------- STM32F413xx/STM32F423xx -------------------------------------*/
#if defined(STM32F413xx) || defined(STM32F423xx)
#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */
#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */
#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */
#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */
#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */
#define OB_WRP_SECTOR_5 0x00000020U /*!< Write protection of Sector5 */
#define OB_WRP_SECTOR_6 0x00000040U /*!< Write protection of Sector6 */
#define OB_WRP_SECTOR_7 0x00000080U /*!< Write protection of Sector7 */
#define OB_WRP_SECTOR_8 0x00000100U /*!< Write protection of Sector8 */
#define OB_WRP_SECTOR_9 0x00000200U /*!< Write protection of Sector9 */
#define OB_WRP_SECTOR_10 0x00000400U /*!< Write protection of Sector10 */
#define OB_WRP_SECTOR_11 0x00000800U /*!< Write protection of Sector11 */
#define OB_WRP_SECTOR_12 0x00001000U /*!< Write protection of Sector12 */
#define OB_WRP_SECTOR_13 0x00002000U /*!< Write protection of Sector13 */
#define OB_WRP_SECTOR_14 0x00004000U /*!< Write protection of Sector14 */
#define OB_WRP_SECTOR_15 0x00004000U /*!< Write protection of Sector15 */
#define OB_WRP_SECTOR_All 0x00007FFFU /*!< Write protection of all Sectors */
#endif /* STM32F413xx || STM32F423xx */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */
#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */
#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */
#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */
#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */
#define OB_WRP_SECTOR_5 0x00000020U /*!< Write protection of Sector5 */
#define OB_WRP_SECTOR_6 0x00000040U /*!< Write protection of Sector6 */
#define OB_WRP_SECTOR_7 0x00000080U /*!< Write protection of Sector7 */
#define OB_WRP_SECTOR_8 0x00000100U /*!< Write protection of Sector8 */
#define OB_WRP_SECTOR_9 0x00000200U /*!< Write protection of Sector9 */
#define OB_WRP_SECTOR_10 0x00000400U /*!< Write protection of Sector10 */
#define OB_WRP_SECTOR_11 0x00000800U /*!< Write protection of Sector11 */
#define OB_WRP_SECTOR_All 0x00000FFFU /*!< Write protection of all Sectors */
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------------- STM32F401xC -------------------------------------------*/
#if defined(STM32F401xC)
#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */
#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */
#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */
#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */
#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */
#define OB_WRP_SECTOR_5 0x00000020U /*!< Write protection of Sector5 */
#define OB_WRP_SECTOR_All 0x00000FFFU /*!< Write protection of all Sectors */
#endif /* STM32F401xC */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------------- STM32F410xx -------------------------------------------*/
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */
#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */
#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */
#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */
#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */
#define OB_WRP_SECTOR_All 0x00000FFFU /*!< Write protection of all Sectors */
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
/*-----------------------------------------------------------------------------------------------------*/
/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/
#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */
#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */
#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */
#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */
#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */
#define OB_WRP_SECTOR_5 0x00000020U /*!< Write protection of Sector5 */
#define OB_WRP_SECTOR_6 0x00000040U /*!< Write protection of Sector6 */
#define OB_WRP_SECTOR_7 0x00000080U /*!< Write protection of Sector7 */
#define OB_WRP_SECTOR_All 0x00000FFFU /*!< Write protection of all Sectors */
#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
/*-----------------------------------------------------------------------------------------------------*/
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC ReadWrite Protection
* @{
*/
/*-------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx ---------------------------*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define OB_PCROP_SECTOR_0 0x00000001U /*!< PC Read/Write protection of Sector0 */
#define OB_PCROP_SECTOR_1 0x00000002U /*!< PC Read/Write protection of Sector1 */
#define OB_PCROP_SECTOR_2 0x00000004U /*!< PC Read/Write protection of Sector2 */
#define OB_PCROP_SECTOR_3 0x00000008U /*!< PC Read/Write protection of Sector3 */
#define OB_PCROP_SECTOR_4 0x00000010U /*!< PC Read/Write protection of Sector4 */
#define OB_PCROP_SECTOR_5 0x00000020U /*!< PC Read/Write protection of Sector5 */
#define OB_PCROP_SECTOR_6 0x00000040U /*!< PC Read/Write protection of Sector6 */
#define OB_PCROP_SECTOR_7 0x00000080U /*!< PC Read/Write protection of Sector7 */
#define OB_PCROP_SECTOR_8 0x00000100U /*!< PC Read/Write protection of Sector8 */
#define OB_PCROP_SECTOR_9 0x00000200U /*!< PC Read/Write protection of Sector9 */
#define OB_PCROP_SECTOR_10 0x00000400U /*!< PC Read/Write protection of Sector10 */
#define OB_PCROP_SECTOR_11 0x00000800U /*!< PC Read/Write protection of Sector11 */
#define OB_PCROP_SECTOR_12 0x00000001U /*!< PC Read/Write protection of Sector12 */
#define OB_PCROP_SECTOR_13 0x00000002U /*!< PC Read/Write protection of Sector13 */
#define OB_PCROP_SECTOR_14 0x00000004U /*!< PC Read/Write protection of Sector14 */
#define OB_PCROP_SECTOR_15 0x00000008U /*!< PC Read/Write protection of Sector15 */
#define OB_PCROP_SECTOR_16 0x00000010U /*!< PC Read/Write protection of Sector16 */
#define OB_PCROP_SECTOR_17 0x00000020U /*!< PC Read/Write protection of Sector17 */
#define OB_PCROP_SECTOR_18 0x00000040U /*!< PC Read/Write protection of Sector18 */
#define OB_PCROP_SECTOR_19 0x00000080U /*!< PC Read/Write protection of Sector19 */
#define OB_PCROP_SECTOR_20 0x00000100U /*!< PC Read/Write protection of Sector20 */
#define OB_PCROP_SECTOR_21 0x00000200U /*!< PC Read/Write protection of Sector21 */
#define OB_PCROP_SECTOR_22 0x00000400U /*!< PC Read/Write protection of Sector22 */
#define OB_PCROP_SECTOR_23 0x00000800U /*!< PC Read/Write protection of Sector23 */
#define OB_PCROP_SECTOR_All 0x00000FFFU /*!< PC Read/Write protection of all Sectors */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
/*-----------------------------------------------------------------------------------------------------*/
/*------------------------------------- STM32F413xx/STM32F423xx ---------------------------------------*/
#if defined(STM32F413xx) || defined(STM32F423xx)
#define OB_PCROP_SECTOR_0 0x00000001U /*!< PC Read/Write protection of Sector0 */
#define OB_PCROP_SECTOR_1 0x00000002U /*!< PC Read/Write protection of Sector1 */
#define OB_PCROP_SECTOR_2 0x00000004U /*!< PC Read/Write protection of Sector2 */
#define OB_PCROP_SECTOR_3 0x00000008U /*!< PC Read/Write protection of Sector3 */
#define OB_PCROP_SECTOR_4 0x00000010U /*!< PC Read/Write protection of Sector4 */
#define OB_PCROP_SECTOR_5 0x00000020U /*!< PC Read/Write protection of Sector5 */
#define OB_PCROP_SECTOR_6 0x00000040U /*!< PC Read/Write protection of Sector6 */
#define OB_PCROP_SECTOR_7 0x00000080U /*!< PC Read/Write protection of Sector7 */
#define OB_PCROP_SECTOR_8 0x00000100U /*!< PC Read/Write protection of Sector8 */
#define OB_PCROP_SECTOR_9 0x00000200U /*!< PC Read/Write protection of Sector9 */
#define OB_PCROP_SECTOR_10 0x00000400U /*!< PC Read/Write protection of Sector10 */
#define OB_PCROP_SECTOR_11 0x00000800U /*!< PC Read/Write protection of Sector11 */
#define OB_PCROP_SECTOR_12 0x00001000U /*!< PC Read/Write protection of Sector12 */
#define OB_PCROP_SECTOR_13 0x00002000U /*!< PC Read/Write protection of Sector13 */
#define OB_PCROP_SECTOR_14 0x00004000U /*!< PC Read/Write protection of Sector14 */
#define OB_PCROP_SECTOR_15 0x00004000U /*!< PC Read/Write protection of Sector15 */
#define OB_PCROP_SECTOR_All 0x00007FFFU /*!< PC Read/Write protection of all Sectors */
#endif /* STM32F413xx || STM32F423xx */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------------- STM32F401xC -------------------------------------------*/
#if defined(STM32F401xC)
#define OB_PCROP_SECTOR_0 0x00000001U /*!< PC Read/Write protection of Sector0 */
#define OB_PCROP_SECTOR_1 0x00000002U /*!< PC Read/Write protection of Sector1 */
#define OB_PCROP_SECTOR_2 0x00000004U /*!< PC Read/Write protection of Sector2 */
#define OB_PCROP_SECTOR_3 0x00000008U /*!< PC Read/Write protection of Sector3 */
#define OB_PCROP_SECTOR_4 0x00000010U /*!< PC Read/Write protection of Sector4 */
#define OB_PCROP_SECTOR_5 0x00000020U /*!< PC Read/Write protection of Sector5 */
#define OB_PCROP_SECTOR_All 0x00000FFFU /*!< PC Read/Write protection of all Sectors */
#endif /* STM32F401xC */
/*-----------------------------------------------------------------------------------------------------*/
/*--------------------------------------------- STM32F410xx -------------------------------------------*/
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define OB_PCROP_SECTOR_0 0x00000001U /*!< PC Read/Write protection of Sector0 */
#define OB_PCROP_SECTOR_1 0x00000002U /*!< PC Read/Write protection of Sector1 */
#define OB_PCROP_SECTOR_2 0x00000004U /*!< PC Read/Write protection of Sector2 */
#define OB_PCROP_SECTOR_3 0x00000008U /*!< PC Read/Write protection of Sector3 */
#define OB_PCROP_SECTOR_4 0x00000010U /*!< PC Read/Write protection of Sector4 */
#define OB_PCROP_SECTOR_All 0x00000FFFU /*!< PC Read/Write protection of all Sectors */
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
/*-----------------------------------------------------------------------------------------------------*/
/*-------------- STM32F401xE/STM32F411xE/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F446xx --*/
#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
#define OB_PCROP_SECTOR_0 0x00000001U /*!< PC Read/Write protection of Sector0 */
#define OB_PCROP_SECTOR_1 0x00000002U /*!< PC Read/Write protection of Sector1 */
#define OB_PCROP_SECTOR_2 0x00000004U /*!< PC Read/Write protection of Sector2 */
#define OB_PCROP_SECTOR_3 0x00000008U /*!< PC Read/Write protection of Sector3 */
#define OB_PCROP_SECTOR_4 0x00000010U /*!< PC Read/Write protection of Sector4 */
#define OB_PCROP_SECTOR_5 0x00000020U /*!< PC Read/Write protection of Sector5 */
#define OB_PCROP_SECTOR_6 0x00000040U /*!< PC Read/Write protection of Sector6 */
#define OB_PCROP_SECTOR_7 0x00000080U /*!< PC Read/Write protection of Sector7 */
#define OB_PCROP_SECTOR_All 0x00000FFFU /*!< PC Read/Write protection of all Sectors */
#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
/*-----------------------------------------------------------------------------------------------------*/
/**
* @}
*/
/** @defgroup FLASHEx_Dual_Boot FLASH Dual Boot
* @{
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define OB_DUAL_BOOT_ENABLE ((uint8_t)0x10) /*!< Dual Bank Boot Enable */
#define OB_DUAL_BOOT_DISABLE ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/** @defgroup FLASHEx_Selection_Protection_Mode FLASH Selection Protection Mode
* @{
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
#define OB_PCROP_DESELECTED ((uint8_t)0x00) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */
#define OB_PCROP_SELECTED ((uint8_t)0x80) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASHEx_Exported_Functions
* @{
*/
/** @addtogroup FLASHEx_Exported_Functions_Group1
* @{
*/
/* Extension Program operation functions *************************************/
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void);
HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Constants FLASH Private Constants
* @{
*/
/*--------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx---------------------*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define FLASH_SECTOR_TOTAL 24U
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
/*-------------------------------------- STM32F413xx/STM32F423xx ---------------------------------------*/
#if defined(STM32F413xx) || defined(STM32F423xx)
#define FLASH_SECTOR_TOTAL 16U
#endif /* STM32F413xx || STM32F423xx */
/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
#define FLASH_SECTOR_TOTAL 12U
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
/*--------------------------------------------- STM32F401xC -------------------------------------------*/
#if defined(STM32F401xC)
#define FLASH_SECTOR_TOTAL 6U
#endif /* STM32F401xC */
/*--------------------------------------------- STM32F410xx -------------------------------------------*/
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define FLASH_SECTOR_TOTAL 5U
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
/*--------------------------------- STM32F401xE/STM32F411xE/STM32F412xG/STM32F446xx -------------------*/
#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
#define FLASH_SECTOR_TOTAL 8U
#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
/**
* @brief OPTCR1 register byte 2 (Bits[23:16]) base address
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define OPTCR1_BYTE2_ADDRESS 0x40023C1AU
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
* @{
*/
/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
* @{
*/
#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
((VALUE) == FLASH_TYPEERASE_MASSERASE))
#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
((RANGE) == FLASH_VOLTAGE_RANGE_4))
#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
((VALUE) == OB_WRPSTATE_ENABLE))
#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR)))
#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
((LEVEL) == OB_RDP_LEVEL_1) ||\
((LEVEL) == OB_RDP_LEVEL_2))
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
#define IS_PCROPSTATE(VALUE)(((VALUE) == OB_PCROP_STATE_DISABLE) || \
((VALUE) == OB_PCROP_STATE_ENABLE))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP) || \
((VALUE) == OPTIONBYTE_BOOTCONFIG))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP))
#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx ||\
STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
((LATENCY) == FLASH_LATENCY_1) || \
((LATENCY) == FLASH_LATENCY_2) || \
((LATENCY) == FLASH_LATENCY_3) || \
((LATENCY) == FLASH_LATENCY_4) || \
((LATENCY) == FLASH_LATENCY_5) || \
((LATENCY) == FLASH_LATENCY_6) || \
((LATENCY) == FLASH_LATENCY_7) || \
((LATENCY) == FLASH_LATENCY_8) || \
((LATENCY) == FLASH_LATENCY_9) || \
((LATENCY) == FLASH_LATENCY_10) || \
((LATENCY) == FLASH_LATENCY_11) || \
((LATENCY) == FLASH_LATENCY_12) || \
((LATENCY) == FLASH_LATENCY_13) || \
((LATENCY) == FLASH_LATENCY_14) || \
((LATENCY) == FLASH_LATENCY_15))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
((LATENCY) == FLASH_LATENCY_1) || \
((LATENCY) == FLASH_LATENCY_2) || \
((LATENCY) == FLASH_LATENCY_3) || \
((LATENCY) == FLASH_LATENCY_4) || \
((LATENCY) == FLASH_LATENCY_5) || \
((LATENCY) == FLASH_LATENCY_6) || \
((LATENCY) == FLASH_LATENCY_7))
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
((BANK) == FLASH_BANK_2) || \
((BANK) == FLASH_BANK_BOTH))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx ||\
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F413xx) || defined(STM32F423xx)
#define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15))
#endif /* STM32F413xx || STM32F423xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11))
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
#if defined(STM32F401xC)
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5))
#endif /* STM32F401xC */
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
((SECTOR) == FLASH_SECTOR_4))
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \
(((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END)))
#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFF000000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F413xx) || defined(STM32F423xx)
#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F413xx || STM32F423xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
#if defined(STM32F401xC)
#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F401xC */
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
defined(STM32F412Rx) || defined(STM32F412Cx)
#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F413xx) || defined(STM32F423xx)
#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F413xx || STM32F423xx */
#if defined(STM32F401xC)
#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F401xC */
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
defined(STM32F412Rx) || defined(STM32F412Cx)
#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
* @{
*/
void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
void FLASH_FlushCaches(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_FLASH_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_flash_ramfunc.h
* @author MCD Application Team
* @brief Header file of FLASH RAMFUNC driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_FLASH_RAMFUNC_H
#define __STM32F4xx_FLASH_RAMFUNC_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup FLASH_RAMFUNC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASH_RAMFUNC_Exported_Functions
* @{
*/
/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
* @{
*/
__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void);
__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void);
__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void);
__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_gpio.h
* @author MCD Application Team
* @brief Header file of GPIO HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_GPIO_H
#define __STM32F4xx_HAL_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup GPIO_Exported_Types GPIO Exported Types
* @{
*/
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIO_mode_define */
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
This parameter can be a value of @ref GPIO_pull_define */
uint32_t Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIO_speed_define */
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
This parameter can be a value of @ref GPIO_Alternate_function_selection */
}GPIO_InitTypeDef;
/**
* @brief GPIO Bit SET and Bit RESET enumeration
*/
typedef enum
{
GPIO_PIN_RESET = 0,
GPIO_PIN_SET
}GPIO_PinState;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
* @{
*/
/** @defgroup GPIO_pins_define GPIO pins define
* @{
*/
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */
/**
* @}
*/
/** @defgroup GPIO_mode_define GPIO mode define
* @brief GPIO Configuration Mode
* Elements values convention: 0xX0yz00YZ
* - X : GPIO mode or EXTI Mode
* - y : External IT or Event trigger detection
* - z : IO configuration on External IT or Event
* - Y : Output type (Push Pull or Open Drain)
* - Z : IO Direction mode (Input, Output, Alternate or Analog)
* @{
*/
#define GPIO_MODE_INPUT 0x00000000U /*!< Input Floating Mode */
#define GPIO_MODE_OUTPUT_PP 0x00000001U /*!< Output Push Pull Mode */
#define GPIO_MODE_OUTPUT_OD 0x00000011U /*!< Output Open Drain Mode */
#define GPIO_MODE_AF_PP 0x00000002U /*!< Alternate Function Push Pull Mode */
#define GPIO_MODE_AF_OD 0x00000012U /*!< Alternate Function Open Drain Mode */
#define GPIO_MODE_ANALOG 0x00000003U /*!< Analog Mode */
#define GPIO_MODE_IT_RISING 0x10110000U /*!< External Interrupt Mode with Rising edge trigger detection */
#define GPIO_MODE_IT_FALLING 0x10210000U /*!< External Interrupt Mode with Falling edge trigger detection */
#define GPIO_MODE_IT_RISING_FALLING 0x10310000U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING 0x10120000U /*!< External Event Mode with Rising edge trigger detection */
#define GPIO_MODE_EVT_FALLING 0x10220000U /*!< External Event Mode with Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING_FALLING 0x10320000U /*!< External Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup GPIO_speed_define GPIO speed define
* @brief GPIO Output Maximum frequency
* @{
*/
#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */
#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */
#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */
/**
* @}
*/
/** @defgroup GPIO_pull_define GPIO pull define
* @brief GPIO Pull-Up or Pull-Down Activation
* @{
*/
#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */
#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */
#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
* @{
*/
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
/**
* @brief Clears the EXTI's line pending flags.
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
/**
* @brief Checks whether the specified EXTI line is asserted or not.
* @param __EXTI_LINE__ specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
/**
* @brief Clears the EXTI's line pending bits.
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
/**
* @brief Generates a Software interrupt on selected EXTI line.
* @param __EXTI_LINE__ specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
/**
* @}
*/
/* Include GPIO HAL Extension module */
#include "stm32f4xx_hal_gpio_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup GPIO_Exported_Functions
* @{
*/
/** @addtogroup GPIO_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
/**
* @}
*/
/** @addtogroup GPIO_Exported_Functions_Group2
* @{
*/
/* IO operation functions *****************************************************/
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup GPIO_Private_Constants GPIO Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup GPIO_Private_Macros GPIO Private Macros
* @{
*/
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
#define IS_GPIO_PIN(PIN) ((((PIN) & GPIO_PIN_MASK ) != 0x00U) && (((PIN) & ~GPIO_PIN_MASK) == 0x00U))
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
((MODE) == GPIO_MODE_AF_PP) ||\
((MODE) == GPIO_MODE_AF_OD) ||\
((MODE) == GPIO_MODE_IT_RISING) ||\
((MODE) == GPIO_MODE_IT_FALLING) ||\
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
((MODE) == GPIO_MODE_EVT_RISING) ||\
((MODE) == GPIO_MODE_EVT_FALLING) ||\
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
((MODE) == GPIO_MODE_ANALOG))
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
((PULL) == GPIO_PULLDOWN))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup GPIO_Private_Functions GPIO Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_GPIO_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_gpio_ex.h
* @author MCD Application Team
* @brief Header file of GPIO HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_GPIO_EX_H
#define __STM32F4xx_HAL_GPIO_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup GPIOEx GPIOEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
* @{
*/
/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
* @{
*/
/*------------------------------------------ STM32F429xx/STM32F439xx ---------*/
#if defined(STM32F429xx) || defined(STM32F439xx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
/**
* @brief AF 14 selection
*/
#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F429xx || STM32F439xx */
/*----------------------------------------------------------------------------*/
/*---------------------------------- STM32F427xx/STM32F437xx------------------*/
#if defined(STM32F427xx) || defined(STM32F437xx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
/** @brief GPIO_Legacy
*/
#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F427xx || STM32F437xx */
/*----------------------------------------------------------------------------*/
/*---------------------------------- STM32F407xx/STM32F417xx------------------*/
#if defined(STM32F407xx) || defined(STM32F417xx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F407xx || STM32F417xx */
/*----------------------------------------------------------------------------*/
/*---------------------------------- STM32F405xx/STM32F415xx------------------*/
#if defined(STM32F405xx) || defined(STM32F415xx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F405xx || STM32F415xx */
/*----------------------------------------------------------------------------*/
/*---------------------------------------- STM32F401xx------------------------*/
#if defined(STM32F401xC) || defined(STM32F401xE)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F401xC || STM32F401xE */
/*----------------------------------------------------------------------------*/
/*--------------- STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-------------*/
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */
#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */
#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */
#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */
#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */
#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */
#define GPIO_AF10_FMC ((uint8_t)0x0A) /* FMC Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
/*----------------------------------------------------------------------------*/
/*--------------- STM32F413xx/STM32F423xx-------------------------------------*/
#if defined(STM32F413xx) || defined(STM32F423xx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
#define GPIO_AF3_DFSDM2 ((uint8_t)0x03) /* DFSDM2 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */
#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */
#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */
#define GPIO_AF6_DFSDM2 ((uint8_t)0x06) /* DFSDM2 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF7_SAI1 ((uint8_t)0x07) /* SAI1 Alternate Function mapping */
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
#define GPIO_AF7_DFSDM2 ((uint8_t)0x07) /* DFSDM2 Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */
#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_SAI1 ((uint8_t)0x0A) /* SAI1 Alternate Function mapping */
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */
#define GPIO_AF10_DFSDM2 ((uint8_t)0x0A) /* DFSDM2 Alternate Function mapping */
#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */
#define GPIO_AF10_FSMC ((uint8_t)0x0A) /* FSMC Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF11_UART4 ((uint8_t)0x0B) /* UART4 Alternate Function mapping */
#define GPIO_AF11_UART5 ((uint8_t)0x0B) /* UART5 Alternate Function mapping */
#define GPIO_AF11_UART9 ((uint8_t)0x0B) /* UART9 Alternate Function mapping */
#define GPIO_AF11_UART10 ((uint8_t)0x0B) /* UART10 Alternate Function mapping */
#define GPIO_AF11_CAN3 ((uint8_t)0x0B) /* CAN3 Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */
/**
* @brief AF 14 selection
*/
#define GPIO_AF14_RNG ((uint8_t)0x0E) /* RNG Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F413xx || STM32F423xx */
/*---------------------------------------- STM32F411xx------------------------*/
#if defined(STM32F411xE)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */
#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F411xE */
/*---------------------------------------- STM32F410xx------------------------*/
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
#if defined(STM32F410Cx) || defined(STM32F410Rx)
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#endif /* STM32F410Cx || STM32F410Rx */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1 Alternate Function mapping */
#if defined(STM32F410Cx) || defined(STM32F410Rx)
#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */
#endif /* STM32F410Cx || STM32F410Rx */
#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
/*---------------------------------------- STM32F446xx -----------------------*/
#if defined(STM32F446xx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
#define GPIO_AF3_CEC ((uint8_t)0x03) /* CEC Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */
#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4 Alternate Function mapping */
#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_UART5 ((uint8_t)0x07) /* UART5 Alternate Function mapping */
#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF7_SPDIFRX ((uint8_t)0x07) /* SPDIFRX Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
#define GPIO_AF8_SPDIFRX ((uint8_t)0x08) /* SPDIFRX Alternate Function mapping */
#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */
#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */
#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F446xx */
/*----------------------------------------------------------------------------*/
/*-------------------------------- STM32F469xx/STM32F479xx--------------------*/
#if defined(STM32F469xx) || defined(STM32F479xx)
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */
#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */
#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
#define GPIO_AF13_DSI ((uint8_t)0x0D) /* DSI Alternate Function mapping */
/**
* @brief AF 14 selection
*/
#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#endif /* STM32F469xx || STM32F479xx */
/*----------------------------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
* @{
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
* @{
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
* @{
*/
/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
* @{
*/
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U :\
((__GPIOx__) == (GPIOE))? 4U :\
((__GPIOx__) == (GPIOF))? 5U :\
((__GPIOx__) == (GPIOG))? 6U :\
((__GPIOx__) == (GPIOH))? 7U : 8U)
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U :\
((__GPIOx__) == (GPIOE))? 4U :\
((__GPIOx__) == (GPIOF))? 5U :\
((__GPIOx__) == (GPIOG))? 6U :\
((__GPIOx__) == (GPIOH))? 7U :\
((__GPIOx__) == (GPIOI))? 8U :\
((__GPIOx__) == (GPIOJ))? 9U : 10U)
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U : 7U)
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U :\
((__GPIOx__) == (GPIOE))? 4U : 7U)
#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
#if defined(STM32F446xx) || defined(STM32F412Zx) ||defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U :\
((__GPIOx__) == (GPIOE))? 4U :\
((__GPIOx__) == (GPIOF))? 5U :\
((__GPIOx__) == (GPIOG))? 6U : 7U)
#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
/**
* @}
*/
/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
* @{
*/
/*------------------------- STM32F429xx/STM32F439xx---------------------------*/
#if defined(STM32F429xx) || defined(STM32F439xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
((AF) == GPIO_AF14_LTDC))
#endif /* STM32F429xx || STM32F439xx */
/*----------------------------------------------------------------------------*/
/*---------------------------------- STM32F427xx/STM32F437xx------------------*/
#if defined(STM32F427xx) || defined(STM32F437xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1))
#endif /* STM32F427xx || STM32F437xx */
/*----------------------------------------------------------------------------*/
/*---------------------------------- STM32F407xx/STM32F417xx------------------*/
#if defined(STM32F407xx) || defined(STM32F417xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
#endif /* STM32F407xx || STM32F417xx */
/*----------------------------------------------------------------------------*/
/*---------------------------------- STM32F405xx/STM32F415xx------------------*/
#if defined(STM32F405xx) || defined(STM32F415xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \
((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
#endif /* STM32F405xx || STM32F415xx */
/*----------------------------------------------------------------------------*/
/*---------------------------------------- STM32F401xx------------------------*/
#if defined(STM32F401xC) || defined(STM32F401xE)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
#endif /* STM32F401xC || STM32F401xE */
/*----------------------------------------------------------------------------*/
/*---------------------------------------- STM32F410xx------------------------*/
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
#define IS_GPIO_AF(AF) (((AF) < 10U) || ((AF) == 15U))
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
/*---------------------------------------- STM32F411xx------------------------*/
#if defined(STM32F411xE)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
#endif /* STM32F411xE */
/*----------------------------------------------------------------------------*/
/*----------------------------------------------- STM32F446xx ----------------*/
#if defined(STM32F446xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \
((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \
((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \
((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI))
#endif /* STM32F446xx */
/*----------------------------------------------------------------------------*/
/*------------------------------------------- STM32F469xx/STM32F479xx --------*/
#if defined(STM32F469xx) || defined(STM32F479xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI) || \
((AF) == GPIO_AF9_QSPI) || ((AF) == GPIO_AF10_QSPI))
#endif /* STM32F469xx || STM32F479xx */
/*----------------------------------------------------------------------------*/
/*------------------STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-----------*/
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 11U) && ((AF) != 14U) && ((AF) != 13U))
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
/*----------------------------------------------------------------------------*/
/*------------------STM32F413xx/STM32F423xx-----------------------------------*/
#if defined(STM32F413xx) || defined(STM32F423xx)
#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 13U))
#endif /* STM32F413xx || STM32F423xx */
/*----------------------------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_GPIO_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_pwr.h
* @author MCD Application Team
* @brief Header file of PWR HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_PWR_H
#define __STM32F4xx_HAL_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Types PWR Exported Types
* @{
*/
/**
* @brief PWR PVD configuration structure definition
*/
typedef struct
{
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
This parameter can be a value of @ref PWR_PVD_detection_level */
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWR_PVD_Mode */
}PWR_PVDTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants PWR Exported Constants
* @{
*/
/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
* @{
*/
#define PWR_WAKEUP_PIN1 0x00000100U
/**
* @}
*/
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
* @{
*/
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
(Compare internally to VREFINT) */
/**
* @}
*/
/** @defgroup PWR_PVD_Mode PWR PVD Mode
* @{
*/
#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */
#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
* @{
*/
#define PWR_MAINREGULATOR_ON 0x00000000U
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
/**
* @}
*/
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
* @{
*/
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
* @{
*/
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup PWR_Flag PWR Flag
* @{
*/
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_BRR PWR_CSR_BRR
#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Macro PWR Exported Macro
* @{
*/
/** @brief Check PWR flag is set or not.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
* was received from the WKUP pin or from the RTC alarm (Alarm A
* or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
* An additional wakeup event is detected if the WKUP pin is enabled
* (by setting the EWUP bit) when the WKUP pin level is already high.
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
* resumed from StandBy mode.
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
* For this reason, this bit is equal to 0 after Standby or reset
* until the PVDE bit is set.
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
* when the device wakes up from Standby mode or by a system reset
* or power reset.
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
* scaling output selection is ready.
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
/** @brief Clear the PWR's pending flags.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WU: Wake Up flag
* @arg PWR_FLAG_SB: StandBy flag
*/
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
/**
* @brief Enable the PVD Exti Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
/**
* @brief Disable the PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
/**
* @brief Enable event on PVD Exti Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
/**
* @brief Disable event on PVD Exti Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
/**
* @brief Enable the PVD Extended Interrupt Rising Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Rising Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Extended Interrupt Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
/**
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
}while(0U)
/**
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
* This parameter can be:
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
}while(0U)
/**
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
* @retval EXTI PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
/**
* @brief Clear the PVD Exti flag.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
/**
* @brief Generates a Software interrupt on PVD EXTI line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
/**
* @}
*/
/* Include PWR HAL Extension module */
#include "stm32f4xx_hal_pwr_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
* @{
*/
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_PWR_DeInit(void);
void HAL_PWR_EnableBkUpAccess(void);
void HAL_PWR_DisableBkUpAccess(void);
/**
* @}
*/
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
* @{
*/
/* Peripheral Control functions **********************************************/
/* PVD configuration */
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
void HAL_PWR_EnablePVD(void);
void HAL_PWR_DisablePVD(void);
/* WakeUp pins configuration */
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
/* Low Power modes entry */
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
void HAL_PWR_EnterSTANDBYMode(void);
/* Power PVD IRQ Handler */
void HAL_PWR_PVD_IRQHandler(void);
void HAL_PWR_PVDCallback(void);
/* Cortex System Control functions *******************************************/
void HAL_PWR_EnableSleepOnExit(void);
void HAL_PWR_DisableSleepOnExit(void);
void HAL_PWR_EnableSEVOnPend(void);
void HAL_PWR_DisableSEVOnPend(void);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup PWR_Private_Constants PWR Private Constants
* @{
*/
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
* @{
*/
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
/**
* @}
*/
/** @defgroup PWR_register_alias_address PWR Register alias address
* @{
*/
/* ------------- PWR registers bit address in the alias region ---------------*/
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
#define PWR_CR_OFFSET 0x00U
#define PWR_CSR_OFFSET 0x04U
#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
/**
* @}
*/
/** @defgroup PWR_CR_register_alias PWR CR Register alias address
* @{
*/
/* --- CR Register ---*/
/* Alias word address of DBP bit */
#define DBP_BIT_NUMBER PWR_CR_DBP_Pos
#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
/* Alias word address of PVDE bit */
#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos
#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
/* Alias word address of VOS bit */
#define VOS_BIT_NUMBER PWR_CR_VOS_Pos
#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U))
/**
* @}
*/
/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
* @{
*/
/* --- CSR Register ---*/
/* Alias word address of EWUP bit */
#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos
#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup PWR_Private_Macros PWR Private Macros
* @{
*/
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
* @{
*/
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
((MODE) == PWR_PVD_MODE_NORMAL))
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_PWR_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_pwr_ex.h
* @author MCD Application Team
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_PWR_EX_H
#define __STM32F4xx_HAL_PWR_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup PWREx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
* @{
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
* @{
*/
#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
/**
* @}
*/
/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
* @{
*/
#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
/**
* @}
*/
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
* @{
*/
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
#define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
#else
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
180 MHz by activating the over-drive mode. */
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
168 MHz by activating the over-drive mode. */
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
/**
* @}
*/
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins
* @{
*/
#define PWR_WAKEUP_PIN2 0x00000080U
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
#define PWR_WAKEUP_PIN3 0x00000040U
#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
/**
* @}
*/
#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
STM32F413xx || STM32F423xx */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
* @{
*/
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
/** @brief macros configure the main internal regulator output voltage.
* @param __REGULATOR__ specifies the regulator output voltage to achieve
* a tradeoff between performance and power consumption when the device does
* not operate at the maximum frequency (refer to the datasheets for more details).
* This parameter can be one of the following values:
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
* @retval None
*/
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
__IO uint32_t tmpreg = 0x00U; \
MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
UNUSED(tmpreg); \
} while(0U)
#else
/** @brief macros configure the main internal regulator output voltage.
* @param __REGULATOR__ specifies the regulator output voltage to achieve
* a tradeoff between performance and power consumption when the device does
* not operate at the maximum frequency (refer to the datasheets for more details).
* This parameter can be one of the following values:
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
* @retval None
*/
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
__IO uint32_t tmpreg = 0x00U; \
MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
UNUSED(tmpreg); \
} while(0U)
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
/** @brief Macros to enable or disable the Over drive mode.
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
*/
#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
/** @brief Macros to enable or disable the Over drive switching.
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
*/
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
/** @brief Macros to enable or disable the Under drive mode.
* @note This mode is enabled only with STOP low power mode.
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
* mode is only available when the main regulator or the low power regulator
* is in low voltage mode.
* @note If the Under-drive mode was enabled, it is automatically disabled after
* exiting Stop mode.
* When the voltage regulator operates in Under-drive mode, an additional
* startup delay is induced when waking up from Stop mode.
*/
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
/** @brief Check PWR flag is set or not.
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
* is ready
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
* switching is ready
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
* is enabled in Stop mode
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
/** @brief Clear the Under-Drive Ready flag.
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
*/
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
* @{
*/
/** @addtogroup PWREx_Exported_Functions_Group1
* @{
*/
void HAL_PWREx_EnableFlashPowerDown(void);
void HAL_PWREx_DisableFlashPowerDown(void);
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
uint32_t HAL_PWREx_GetVoltageRange(void);
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
#if defined(STM32F469xx) || defined(STM32F479xx)
void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void);
void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void);
#endif /* STM32F469xx || STM32F479xx */
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup PWREx_Private_Constants PWREx Private Constants
* @{
*/
/** @defgroup PWREx_register_alias_address PWREx Register alias address
* @{
*/
/* ------------- PWR registers bit address in the alias region ---------------*/
/* --- CR Register ---*/
/* Alias word address of FPDS bit */
#define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos
#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
/* Alias word address of ODEN bit */
#define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos
#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))
/* Alias word address of ODSWEN bit */
#define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos
#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))
/* Alias word address of MRLVDS bit */
#define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos
#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))
/* Alias word address of LPLVDS bit */
#define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos
#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))
/**
* @}
*/
/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
* @{
*/
/* --- CSR Register ---*/
/* Alias word address of BRE bit */
#define BRE_BIT_NUMBER PWR_CSR_BRE_Pos
#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
#if defined(STM32F469xx) || defined(STM32F479xx)
/* Alias word address of WUPP bit */
#define WUPP_BIT_NUMBER PWR_CSR_WUPP_Pos
#define CSR_WUPP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (WUPP_BIT_NUMBER * 4U))
#endif /* STM32F469xx || STM32F479xx */
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup PWREx_Private_Macros PWREx Private Macros
* @{
*/
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
* @{
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
#else
#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
#if defined(STM32F446xx)
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \
((PIN) == PWR_WAKEUP_PIN3))
#else
#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
#endif /* STM32F446xx */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_PWR_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_rcc.h
* @author MCD Application Team
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_RCC_H
#define __STM32F4xx_HAL_RCC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/* Include RCC HAL Extended module */
/* (include on top of file since RCC structures are defined in extended file) */
#include "stm32f4xx_hal_rcc_ex.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup RCC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RCC_Exported_Types RCC Exported Types
* @{
*/
/**
* @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
*/
typedef struct
{
uint32_t OscillatorType; /*!< The oscillators to be configured.
This parameter can be a value of @ref RCC_Oscillator_Type */
uint32_t HSEState; /*!< The new state of the HSE.
This parameter can be a value of @ref RCC_HSE_Config */
uint32_t LSEState; /*!< The new state of the LSE.
This parameter can be a value of @ref RCC_LSE_Config */
uint32_t HSIState; /*!< The new state of the HSI.
This parameter can be a value of @ref RCC_HSI_Config */
uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
uint32_t LSIState; /*!< The new state of the LSI.
This parameter can be a value of @ref RCC_LSI_Config */
RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
}RCC_OscInitTypeDef;
/**
* @brief RCC System, AHB and APB busses clock configuration structure definition
*/
typedef struct
{
uint32_t ClockType; /*!< The clock to be configured.
This parameter can be a value of @ref RCC_System_Clock_Type */
uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
This parameter can be a value of @ref RCC_System_Clock_Source */
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
This parameter can be a value of @ref RCC_AHB_Clock_Source */
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
}RCC_ClkInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RCC_Exported_Constants RCC Exported Constants
* @{
*/
/** @defgroup RCC_Oscillator_Type Oscillator Type
* @{
*/
#define RCC_OSCILLATORTYPE_NONE 0x00000000U
#define RCC_OSCILLATORTYPE_HSE 0x00000001U
#define RCC_OSCILLATORTYPE_HSI 0x00000002U
#define RCC_OSCILLATORTYPE_LSE 0x00000004U
#define RCC_OSCILLATORTYPE_LSI 0x00000008U
/**
* @}
*/
/** @defgroup RCC_HSE_Config HSE Config
* @{
*/
#define RCC_HSE_OFF 0x00000000U
#define RCC_HSE_ON RCC_CR_HSEON
#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON))
/**
* @}
*/
/** @defgroup RCC_LSE_Config LSE Config
* @{
*/
#define RCC_LSE_OFF 0x00000000U
#define RCC_LSE_ON RCC_BDCR_LSEON
#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON))
/**
* @}
*/
/** @defgroup RCC_HSI_Config HSI Config
* @{
*/
#define RCC_HSI_OFF ((uint8_t)0x00)
#define RCC_HSI_ON ((uint8_t)0x01)
#define RCC_HSICALIBRATION_DEFAULT 0x10U /* Default HSI calibration trimming value */
/**
* @}
*/
/** @defgroup RCC_LSI_Config LSI Config
* @{
*/
#define RCC_LSI_OFF ((uint8_t)0x00)
#define RCC_LSI_ON ((uint8_t)0x01)
/**
* @}
*/
/** @defgroup RCC_PLL_Config PLL Config
* @{
*/
#define RCC_PLL_NONE ((uint8_t)0x00)
#define RCC_PLL_OFF ((uint8_t)0x01)
#define RCC_PLL_ON ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
* @{
*/
#define RCC_PLLP_DIV2 0x00000002U
#define RCC_PLLP_DIV4 0x00000004U
#define RCC_PLLP_DIV6 0x00000006U
#define RCC_PLLP_DIV8 0x00000008U
/**
* @}
*/
/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
* @{
*/
#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
/**
* @}
*/
/** @defgroup RCC_System_Clock_Type System Clock Type
* @{
*/
#define RCC_CLOCKTYPE_SYSCLK 0x00000001U
#define RCC_CLOCKTYPE_HCLK 0x00000002U
#define RCC_CLOCKTYPE_PCLK1 0x00000004U
#define RCC_CLOCKTYPE_PCLK2 0x00000008U
/**
* @}
*/
/** @defgroup RCC_System_Clock_Source System Clock Source
* @note The RCC_SYSCLKSOURCE_PLLRCLK parameter is available only for
* STM32F446xx devices.
* @{
*/
#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1))
/**
* @}
*/
/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
* @note The RCC_SYSCLKSOURCE_STATUS_PLLRCLK parameter is available only for
* STM32F446xx devices.
* @{
*/
#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SWS_0 | RCC_CFGR_SWS_1)) /*!< PLLR used as system clock */
/**
* @}
*/
/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
* @{
*/
#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
/**
* @}
*/
/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source
* @{
*/
#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
/**
* @}
*/
/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
* @{
*/
#define RCC_RTCCLKSOURCE_LSE 0x00000100U
#define RCC_RTCCLKSOURCE_LSI 0x00000200U
#define RCC_RTCCLKSOURCE_HSE_DIV2 0x00020300U
#define RCC_RTCCLKSOURCE_HSE_DIV3 0x00030300U
#define RCC_RTCCLKSOURCE_HSE_DIV4 0x00040300U
#define RCC_RTCCLKSOURCE_HSE_DIV5 0x00050300U
#define RCC_RTCCLKSOURCE_HSE_DIV6 0x00060300U
#define RCC_RTCCLKSOURCE_HSE_DIV7 0x00070300U
#define RCC_RTCCLKSOURCE_HSE_DIV8 0x00080300U
#define RCC_RTCCLKSOURCE_HSE_DIV9 0x00090300U
#define RCC_RTCCLKSOURCE_HSE_DIV10 0x000A0300U
#define RCC_RTCCLKSOURCE_HSE_DIV11 0x000B0300U
#define RCC_RTCCLKSOURCE_HSE_DIV12 0x000C0300U
#define RCC_RTCCLKSOURCE_HSE_DIV13 0x000D0300U
#define RCC_RTCCLKSOURCE_HSE_DIV14 0x000E0300U
#define RCC_RTCCLKSOURCE_HSE_DIV15 0x000F0300U
#define RCC_RTCCLKSOURCE_HSE_DIV16 0x00100300U
#define RCC_RTCCLKSOURCE_HSE_DIV17 0x00110300U
#define RCC_RTCCLKSOURCE_HSE_DIV18 0x00120300U
#define RCC_RTCCLKSOURCE_HSE_DIV19 0x00130300U
#define RCC_RTCCLKSOURCE_HSE_DIV20 0x00140300U
#define RCC_RTCCLKSOURCE_HSE_DIV21 0x00150300U
#define RCC_RTCCLKSOURCE_HSE_DIV22 0x00160300U
#define RCC_RTCCLKSOURCE_HSE_DIV23 0x00170300U
#define RCC_RTCCLKSOURCE_HSE_DIV24 0x00180300U
#define RCC_RTCCLKSOURCE_HSE_DIV25 0x00190300U
#define RCC_RTCCLKSOURCE_HSE_DIV26 0x001A0300U
#define RCC_RTCCLKSOURCE_HSE_DIV27 0x001B0300U
#define RCC_RTCCLKSOURCE_HSE_DIV28 0x001C0300U
#define RCC_RTCCLKSOURCE_HSE_DIV29 0x001D0300U
#define RCC_RTCCLKSOURCE_HSE_DIV30 0x001E0300U
#define RCC_RTCCLKSOURCE_HSE_DIV31 0x001F0300U
/**
* @}
*/
/** @defgroup RCC_MCO_Index MCO Index
* @{
*/
#define RCC_MCO1 0x00000000U
#define RCC_MCO2 0x00000001U
/**
* @}
*/
/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
* @{
*/
#define RCC_MCO1SOURCE_HSI 0x00000000U
#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
/**
* @}
*/
/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler
* @{
*/
#define RCC_MCODIV_1 0x00000000U
#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
/**
* @}
*/
/** @defgroup RCC_Interrupt Interrupts
* @{
*/
#define RCC_IT_LSIRDY ((uint8_t)0x01)
#define RCC_IT_LSERDY ((uint8_t)0x02)
#define RCC_IT_HSIRDY ((uint8_t)0x04)
#define RCC_IT_HSERDY ((uint8_t)0x08)
#define RCC_IT_PLLRDY ((uint8_t)0x10)
#define RCC_IT_PLLI2SRDY ((uint8_t)0x20)
#define RCC_IT_CSS ((uint8_t)0x80)
/**
* @}
*/
/** @defgroup RCC_Flag Flags
* Elements values convention: 0XXYYYYYb
* - YYYYY : Flag position in the register
* - 0XX : Register index
* - 01: CR register
* - 10: BDCR register
* - 11: CSR register
* @{
*/
/* Flags in the CR register */
#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
#define RCC_FLAG_HSERDY ((uint8_t)0x31)
#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B)
/* Flags in the BDCR register */
#define RCC_FLAG_LSERDY ((uint8_t)0x41)
/* Flags in the CSR register */
#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
#define RCC_FLAG_BORRST ((uint8_t)0x79)
#define RCC_FLAG_PINRST ((uint8_t)0x7A)
#define RCC_FLAG_PORRST ((uint8_t)0x7B)
#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup RCC_Exported_Macros RCC Exported Macros
* @{
*/
/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
* @brief Enable or disable the AHB1 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
/**
* @}
*/
/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
* @brief Get the enable or disable status of the AHB1 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) != RESET)
#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) != RESET)
#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) != RESET)
#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) != RESET)
#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) != RESET)
#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) != RESET)
#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) == RESET)
#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) == RESET)
#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) == RESET)
#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) == RESET)
#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) == RESET)
#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) == RESET)
/**
* @}
*/
/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_USART2_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_PWR_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
/**
* @}
*/
/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
* @brief Get the enable or disable status of the APB1 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
/**
* @}
*/
/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_USART1_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_USART6_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
UNUSED(tmpreg); \
} while(0U)
#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
/**
* @}
*/
/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
* @brief Get the enable or disable status of the APB2 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
/**
* @}
*/
/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset
* @brief Force or release AHB1 peripheral reset.
* @{
*/
#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
/**
* @}
*/
/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
* @brief Force or release APB1 peripheral reset.
* @{
*/
#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
/**
* @}
*/
/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
* @brief Force or release APB2 peripheral reset.
* @{
*/
#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
/**
* @}
*/
/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
/**
* @}
*/
/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
/**
* @}
*/
/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
/**
* @}
*/
/** @defgroup RCC_HSI_Configuration HSI Configuration
* @{
*/
/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
* @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
* It is used (enabled by hardware) as system clock source after startup
* from Reset, wake-up from STOP and STANDBY mode, or in case of failure
* of the HSE used directly or indirectly as system clock (if the Clock
* Security System CSS is enabled).
* @note HSI can not be stopped if it is used as system clock source. In this case,
* you have to select another source of the system clock then stop the HSI.
* @note After enabling the HSI, the application software should wait on HSIRDY
* flag to be set indicating that HSI clock is stable and can be used as
* system clock source.
* This parameter can be: ENABLE or DISABLE.
* @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
* clock cycles.
*/
#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal HSI RC.
* @param __HSICalibrationValue__ specifies the calibration trimming value.
* (default is RCC_HSICALIBRATION_DEFAULT).
* This parameter must be a number between 0 and 0x1F.
*/
#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_Pos))
/**
* @}
*/
/** @defgroup RCC_LSI_Configuration LSI Configuration
* @{
*/
/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
* @note After enabling the LSI, the application software should wait on
* LSIRDY flag to be set indicating that LSI clock is stable and can
* be used to clock the IWDG and/or the RTC.
* @note LSI can not be disabled if the IWDG is running.
* @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
* clock cycles.
*/
#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
/**
* @}
*/
/** @defgroup RCC_HSE_Configuration HSE Configuration
* @{
*/
/**
* @brief Macro to configure the External High Speed oscillator (HSE).
* @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro.
* User should request a transition to HSE Off first and then HSE On or HSE Bypass.
* @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
* software should wait on HSERDY flag to be set indicating that HSE clock
* is stable and can be used to clock the PLL and/or system clock.
* @note HSE state can not be changed if it is used directly or through the
* PLL as system clock. In this case, you have to select another source
* of the system clock then change the HSE state (ex. disable it).
* @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
* @note This function reset the CSSON bit, so if the clock security system(CSS)
* was previously enabled you have to enable it again after calling this
* function.
* @param __STATE__ specifies the new state of the HSE.
* This parameter can be one of the following values:
* @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
* 6 HSE oscillator clock cycles.
* @arg RCC_HSE_ON: turn ON the HSE oscillator.
* @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
*/
#define __HAL_RCC_HSE_CONFIG(__STATE__) \
do { \
if ((__STATE__) == RCC_HSE_ON) \
{ \
SET_BIT(RCC->CR, RCC_CR_HSEON); \
} \
else if ((__STATE__) == RCC_HSE_BYPASS) \
{ \
SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
SET_BIT(RCC->CR, RCC_CR_HSEON); \
} \
else \
{ \
CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
} \
} while(0U)
/**
* @}
*/
/** @defgroup RCC_LSE_Configuration LSE Configuration
* @{
*/
/**
* @brief Macro to configure the External Low Speed oscillator (LSE).
* @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
* User should request a transition to LSE Off first and then LSE On or LSE Bypass.
* @note As the LSE is in the Backup domain and write access is denied to
* this domain after reset, you have to enable write access using
* HAL_PWR_EnableBkUpAccess() function before to configure the LSE
* (to be done once after reset).
* @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
* software should wait on LSERDY flag to be set indicating that LSE clock
* is stable and can be used to clock the RTC.
* @param __STATE__ specifies the new state of the LSE.
* This parameter can be one of the following values:
* @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
* 6 LSE oscillator clock cycles.
* @arg RCC_LSE_ON: turn ON the LSE oscillator.
* @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
*/
#define __HAL_RCC_LSE_CONFIG(__STATE__) \
do { \
if((__STATE__) == RCC_LSE_ON) \
{ \
SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
} \
else if((__STATE__) == RCC_LSE_BYPASS) \
{ \
SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
} \
else \
{ \
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
} \
} while(0U)
/**
* @}
*/
/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
* @{
*/
/** @brief Macros to enable or disable the RTC clock.
* @note These macros must be used only after the RTC clock source was selected.
*/
#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
/** @brief Macros to configure the RTC clock (RTCCLK).
* @note As the RTC clock configuration bits are in the Backup domain and write
* access is denied to this domain after reset, you have to enable write
* access using the Power Backup Access macro before to configure
* the RTC clock source (to be done once after reset).
* @note Once the RTC clock is configured it can't be changed unless the
* Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
* a Power On Reset (POR).
* @param __RTCCLKSource__ specifies the RTC clock source.
* This parameter can be one of the following values:
* @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
* @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
* @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
* as RTC clock, where x:[2,31]
* @note If the LSE or LSI is used as RTC clock source, the RTC continues to
* work in STOP and STANDBY modes, and can be used as wake-up source.
* However, when the HSE clock is used as RTC clock source, the RTC
* cannot be used in STOP and STANDBY modes.
* @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
* RTC clock source).
*/
#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFFU)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \
} while(0U)
/** @brief Macros to force or release the Backup domain reset.
* @note This function resets the RTC peripheral (including the backup registers)
* and the RTC clock source selection in RCC_CSR register.
* @note The BKPSRAM is not affected by this reset.
*/
#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
/**
* @}
*/
/** @defgroup RCC_PLL_Configuration PLL Configuration
* @{
*/
/** @brief Macros to enable or disable the main PLL.
* @note After enabling the main PLL, the application software should wait on
* PLLRDY flag to be set indicating that PLL clock is stable and can
* be used as system clock source.
* @note The main PLL can not be disabled if it is used as system clock source
* @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
*/
#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
/** @brief Macro to configure the PLL clock source.
* @note This function must be used only when the main PLL is disabled.
* @param __PLLSOURCE__ specifies the PLL entry clock source.
* This parameter can be one of the following values:
* @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
* @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
*
*/
#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
/** @brief Macro to configure the PLL multiplication factor.
* @note This function must be used only when the main PLL is disabled.
* @param __PLLM__ specifies the division factor for PLL VCO input clock
* This parameter must be a number between Min_Data = 2 and Max_Data = 63.
* @note You have to set the PLLM parameter correctly to ensure that the VCO input
* frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
* of 2 MHz to limit PLL jitter.
*
*/
#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
/**
* @}
*/
/** @defgroup RCC_Get_Clock_source Get Clock source
* @{
*/
/**
* @brief Macro to configure the system clock source.
* @param __RCC_SYSCLKSOURCE__ specifies the system clock source.
* This parameter can be one of the following values:
* - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
* - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
* - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
* - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source. This
* parameter is available only for STM32F446xx devices.
*/
#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))
/** @brief Macro to get the clock source used as system clock.
* @retval The clock source used as system clock. The returned value can be one
* of the following:
* - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
* - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
* - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
* - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock. This parameter
* is available only for STM32F446xx devices.
*/
#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS)
/** @brief Macro to get the oscillator used as PLL clock source.
* @retval The oscillator used as PLL clock source. The returned value can be one
* of the following:
* - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
* - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
*/
#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
/**
* @}
*/
/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
* @{
*/
/** @brief Macro to configure the MCO1 clock.
* @param __MCOCLKSOURCE__ specifies the MCO clock source.
* This parameter can be one of the following values:
* @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
* @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
* @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
* @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
* @param __MCODIV__ specifies the MCO clock prescaler.
* This parameter can be one of the following values:
* @arg RCC_MCODIV_1: no division applied to MCOx clock
* @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
* @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
* @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
* @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
*/
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
/** @brief Macro to configure the MCO2 clock.
* @param __MCOCLKSOURCE__ specifies the MCO clock source.
* This parameter can be one of the following values:
* @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
* @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
* @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
* @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
* @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
* @param __MCODIV__ specifies the MCO clock prescaler.
* This parameter can be one of the following values:
* @arg RCC_MCODIV_1: no division applied to MCOx clock
* @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
* @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
* @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
* @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
* @note For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have
* at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
*/
#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));
/**
* @}
*/
/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
* @brief macros to manage the specified RCC Flags and interrupts.
* @{
*/
/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
* the selected interrupts).
* @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt.
* @arg RCC_IT_LSERDY: LSE ready interrupt.
* @arg RCC_IT_HSIRDY: HSI ready interrupt.
* @arg RCC_IT_HSERDY: HSE ready interrupt.
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
*/
#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
* the selected interrupts).
* @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt.
* @arg RCC_IT_LSERDY: LSE ready interrupt.
* @arg RCC_IT_HSIRDY: HSI ready interrupt.
* @arg RCC_IT_HSERDY: HSE ready interrupt.
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
*/
#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
* bits to clear the selected interrupt pending bits.
* @param __INTERRUPT__ specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt.
* @arg RCC_IT_LSERDY: LSE ready interrupt.
* @arg RCC_IT_HSIRDY: HSI ready interrupt.
* @arg RCC_IT_HSERDY: HSE ready interrupt.
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
* @arg RCC_IT_CSS: Clock Security System interrupt
*/
#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
/** @brief Check the RCC's interrupt has occurred or not.
* @param __INTERRUPT__ specifies the RCC interrupt source to check.
* This parameter can be one of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt.
* @arg RCC_IT_LSERDY: LSE ready interrupt.
* @arg RCC_IT_HSIRDY: HSI ready interrupt.
* @arg RCC_IT_HSERDY: HSE ready interrupt.
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
* @arg RCC_IT_CSS: Clock Security System interrupt
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
*/
#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
* RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
*/
#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
/** @brief Check RCC flag is set or not.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
* @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
* @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
* @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
* @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
* @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
* @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
* @arg RCC_FLAG_PINRST: Pin reset.
* @arg RCC_FLAG_PORRST: POR/PDR reset.
* @arg RCC_FLAG_SFTRST: Software reset.
* @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
* @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
* @arg RCC_FLAG_LPWRRST: Low Power reset.
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define RCC_FLAG_MASK ((uint8_t)0x1FU)
#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR :((((__FLAG__) >> 5U) == 3U)? RCC->CSR :RCC->CIR))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RCC_Exported_Functions
* @{
*/
/** @addtogroup RCC_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ******************************/
HAL_StatusTypeDef HAL_RCC_DeInit(void);
HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
/**
* @}
*/
/** @addtogroup RCC_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
void HAL_RCC_EnableCSS(void);
void HAL_RCC_DisableCSS(void);
uint32_t HAL_RCC_GetSysClockFreq(void);
uint32_t HAL_RCC_GetHCLKFreq(void);
uint32_t HAL_RCC_GetPCLK1Freq(void);
uint32_t HAL_RCC_GetPCLK2Freq(void);
void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
/* CSS NMI IRQ handler */
void HAL_RCC_NMI_IRQHandler(void);
/* User Callbacks in non blocking mode (IT mode) */
void HAL_RCC_CSSCallback(void);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup RCC_Private_Constants RCC Private Constants
* @{
*/
/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
* @brief RCC registers bit address in the alias region
* @{
*/
#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
/* --- CR Register --- */
/* Alias word address of HSION bit */
#define RCC_CR_OFFSET (RCC_OFFSET + 0x00U)
#define RCC_HSION_BIT_NUMBER 0x00U
#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_HSION_BIT_NUMBER * 4U))
/* Alias word address of CSSON bit */
#define RCC_CSSON_BIT_NUMBER 0x13U
#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_CSSON_BIT_NUMBER * 4U))
/* Alias word address of PLLON bit */
#define RCC_PLLON_BIT_NUMBER 0x18U
#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLON_BIT_NUMBER * 4U))
/* --- BDCR Register --- */
/* Alias word address of RTCEN bit */
#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70U)
#define RCC_RTCEN_BIT_NUMBER 0x0FU
#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U))
/* Alias word address of BDRST bit */
#define RCC_BDRST_BIT_NUMBER 0x10U
#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_BDRST_BIT_NUMBER * 4U))
/* --- CSR Register --- */
/* Alias word address of LSION bit */
#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74U)
#define RCC_LSION_BIT_NUMBER 0x00U
#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32U) + (RCC_LSION_BIT_NUMBER * 4U))
/* CR register byte 3 (Bits[23:16]) base address */
#define RCC_CR_BYTE2_ADDRESS 0x40023802U
/* CIR register byte 2 (Bits[15:8]) base address */
#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x01U))
/* CIR register byte 3 (Bits[23:16]) base address */
#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x02U))
/* BDCR register base address */
#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
#define RCC_DBP_TIMEOUT_VALUE 2U
#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
#define HSI_TIMEOUT_VALUE 2U /* 2 ms */
#define LSI_TIMEOUT_VALUE 2U /* 2 ms */
#define CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup RCC_Private_Macros RCC Private Macros
* @{
*/
/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
* @{
*/
#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15U)
#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
((HSE) == RCC_HSE_BYPASS))
#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
((LSE) == RCC_LSE_BYPASS))
#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
((SOURCE) == RCC_PLLSOURCE_HSE))
#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK))
#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31))
#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63U)
#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2U) || ((VALUE) == 4U) || ((VALUE) == 6U) || ((VALUE) == 8U))
#define IS_RCC_PLLQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U))
#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
((HCLK) == RCC_SYSCLK_DIV512))
#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 15U))
#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
((PCLK) == RCC_HCLK_DIV16))
#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))
#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
((DIV) == RCC_MCODIV_5))
#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1FU)
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_RCC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_tim.h
* @author MCD Application Team
* @brief Header file of TIM HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_TIM_H
#define __STM32F4xx_HAL_TIM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup TIM
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup TIM_Exported_Types TIM Exported Types
* @{
*/
/**
* @brief TIM Time base Configuration Structure definition
*/
typedef struct
{
uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
uint32_t CounterMode; /*!< Specifies the counter mode.
This parameter can be a value of @ref TIM_Counter_Mode */
uint32_t Period; /*!< Specifies the period value to be loaded into the active
Auto-Reload Register at the next update event.
This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFF. */
uint32_t ClockDivision; /*!< Specifies the clock division.
This parameter can be a value of @ref TIM_ClockDivision */
uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
reaches zero, an update event is generated and counting restarts
from the RCR value (N).
This means in PWM mode that (N+1) corresponds to:
- the number of PWM periods in edge-aligned mode
- the number of half PWM period in center-aligned mode
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
@note This parameter is valid only for TIM1 and TIM8. */
} TIM_Base_InitTypeDef;
/**
* @brief TIM Output Compare Configuration Structure definition
*/
typedef struct
{
uint32_t OCMode; /*!< Specifies the TIM mode.
This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
uint32_t OCPolarity; /*!< Specifies the output polarity.
This parameter can be a value of @ref TIM_Output_Compare_Polarity */
uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
@note This parameter is valid only for TIM1 and TIM8. */
uint32_t OCFastMode; /*!< Specifies the Fast mode state.
This parameter can be a value of @ref TIM_Output_Fast_State
@note This parameter is valid only in PWM1 and PWM2 mode. */
uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_Output_Compare_Idle_State
@note This parameter is valid only for TIM1 and TIM8. */
uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
@note This parameter is valid only for TIM1 and TIM8. */
} TIM_OC_InitTypeDef;
/**
* @brief TIM One Pulse Mode Configuration Structure definition
*/
typedef struct
{
uint32_t OCMode; /*!< Specifies the TIM mode.
This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
uint32_t OCPolarity; /*!< Specifies the output polarity.
This parameter can be a value of @ref TIM_Output_Compare_Polarity */
uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
@note This parameter is valid only for TIM1 and TIM8. */
uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_Output_Compare_Idle_State
@note This parameter is valid only for TIM1 and TIM8. */
uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
@note This parameter is valid only for TIM1 and TIM8. */
uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t ICSelection; /*!< Specifies the input.
This parameter can be a value of @ref TIM_Input_Capture_Selection */
uint32_t ICFilter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
} TIM_OnePulse_InitTypeDef;
/**
* @brief TIM Input Capture Configuration Structure definition
*/
typedef struct
{
uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t ICSelection; /*!< Specifies the input.
This parameter can be a value of @ref TIM_Input_Capture_Selection */
uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint32_t ICFilter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
} TIM_IC_InitTypeDef;
/**
* @brief TIM Encoder Configuration Structure definition
*/
typedef struct
{
uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Encoder_Mode */
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t IC1Selection; /*!< Specifies the input.
This parameter can be a value of @ref TIM_Input_Capture_Selection */
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint32_t IC1Filter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t IC2Selection; /*!< Specifies the input.
This parameter can be a value of @ref TIM_Input_Capture_Selection */
uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint32_t IC2Filter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
} TIM_Encoder_InitTypeDef;
/**
* @brief Clock Configuration Handle Structure definition
*/
typedef struct
{
uint32_t ClockSource; /*!< TIM clock sources.
This parameter can be a value of @ref TIM_Clock_Source */
uint32_t ClockPolarity; /*!< TIM clock polarity.
This parameter can be a value of @ref TIM_Clock_Polarity */
uint32_t ClockPrescaler; /*!< TIM clock prescaler.
This parameter can be a value of @ref TIM_Clock_Prescaler */
uint32_t ClockFilter; /*!< TIM clock filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
}TIM_ClockConfigTypeDef;
/**
* @brief Clear Input Configuration Handle Structure definition
*/
typedef struct
{
uint32_t ClearInputState; /*!< TIM clear Input state.
This parameter can be ENABLE or DISABLE */
uint32_t ClearInputSource; /*!< TIM clear Input sources.
This parameter can be a value of @ref TIM_ClearInput_Source */
uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity.
This parameter can be a value of @ref TIM_ClearInput_Polarity */
uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler.
This parameter can be a value of @ref TIM_ClearInput_Prescaler */
uint32_t ClearInputFilter; /*!< TIM Clear Input filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
}TIM_ClearInputConfigTypeDef;
/**
* @brief TIM Slave configuration Structure definition
*/
typedef struct {
uint32_t SlaveMode; /*!< Slave mode selection
This parameter can be a value of @ref TIM_Slave_Mode */
uint32_t InputTrigger; /*!< Input Trigger source
This parameter can be a value of @ref TIM_Trigger_Selection */
uint32_t TriggerPolarity; /*!< Input Trigger polarity
This parameter can be a value of @ref TIM_Trigger_Polarity */
uint32_t TriggerPrescaler; /*!< Input trigger prescaler
This parameter can be a value of @ref TIM_Trigger_Prescaler */
uint32_t TriggerFilter; /*!< Input trigger filter
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
}TIM_SlaveConfigTypeDef;
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
}HAL_TIM_StateTypeDef;
/**
* @brief HAL Active channel structures definition
*/
typedef enum
{
HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */
}HAL_TIM_ActiveChannel;
/**
* @brief TIM Time Base Handle Structure definition
*/
typedef struct
{
TIM_TypeDef *Instance; /*!< Register base address */
TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
HAL_TIM_ActiveChannel Channel; /*!< Active channel */
DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
This array is accessed by a @ref DMA_Handle_index */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
}TIM_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup TIM_Exported_Constants TIM Exported Constants
* @{
*/
/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
* @{
*/
#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */
#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
/**
* @}
*/
/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
* @{
*/
#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */
/**
* @}
*/
/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
* @{
*/
#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */
#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
/**
* @}
*/
/** @defgroup TIM_Counter_Mode TIM Counter Mode
* @{
*/
#define TIM_COUNTERMODE_UP 0x00000000U
#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
/**
* @}
*/
/** @defgroup TIM_ClockDivision TIM Clock Division
* @{
*/
#define TIM_CLOCKDIVISION_DIV1 0x00000000U
#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
/**
* @}
*/
/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM modes
* @{
*/
#define TIM_OCMODE_TIMING 0x00000000U
#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
/**
* @}
*/
/** @defgroup TIM_Output_Fast_State TIM Output Fast State
* @{
*/
#define TIM_OCFAST_DISABLE 0x00000000U
#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
/**
* @}
*/
/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
* @{
*/
#define TIM_OCPOLARITY_HIGH 0x00000000U
#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
/**
* @}
*/
/** @defgroup TIM_Output_Compare_N_Polarity TIM Output CompareN Polarity
* @{
*/
#define TIM_OCNPOLARITY_HIGH 0x00000000U
#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
/**
* @}
*/
/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
* @{
*/
#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
#define TIM_OCIDLESTATE_RESET 0x00000000U
/**
* @}
*/
/** @defgroup TIM_Output_Compare_N_Idle_State TIM Output Compare N Idle State
* @{
*/
#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
#define TIM_OCNIDLESTATE_RESET 0x00000000U
/**
* @}
*/
/** @defgroup TIM_Channel TIM Channel
* @{
*/
#define TIM_CHANNEL_1 0x00000000U
#define TIM_CHANNEL_2 0x00000004U
#define TIM_CHANNEL_3 0x00000008U
#define TIM_CHANNEL_4 0x0000000CU
#define TIM_CHANNEL_ALL 0x00000018U
/**
* @}
*/
/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
* @{
*/
#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
/**
* @}
*/
/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
* @{
*/
#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
connected to IC1, IC2, IC3 or IC4, respectively */
#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
connected to IC2, IC1, IC4 or IC3, respectively */
#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
/**
* @}
*/
/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
* @{
*/
#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */
#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
/**
* @}
*/
/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
* @{
*/
#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
#define TIM_OPMODE_REPETITIVE 0x00000000U
/**
* @}
*/
/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
* @{
*/
#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
/**
* @}
*/
/** @defgroup TIM_Interrupt_definition TIM Interrupt definition
* @{
*/
#define TIM_IT_UPDATE (TIM_DIER_UIE)
#define TIM_IT_CC1 (TIM_DIER_CC1IE)
#define TIM_IT_CC2 (TIM_DIER_CC2IE)
#define TIM_IT_CC3 (TIM_DIER_CC3IE)
#define TIM_IT_CC4 (TIM_DIER_CC4IE)
#define TIM_IT_COM (TIM_DIER_COMIE)
#define TIM_IT_TRIGGER (TIM_DIER_TIE)
#define TIM_IT_BREAK (TIM_DIER_BIE)
/**
* @}
*/
/** @defgroup TIM_Commutation_Source TIM Commutation Source
* @{
*/
#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
#define TIM_COMMUTATION_SOFTWARE 0x00000000U
/**
* @}
*/
/** @defgroup TIM_DMA_sources TIM DMA sources
* @{
*/
#define TIM_DMA_UPDATE (TIM_DIER_UDE)
#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
#define TIM_DMA_COM (TIM_DIER_COMDE)
#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
/**
* @}
*/
/** @defgroup TIM_Event_Source TIM Event Source
* @{
*/
#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG
#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G
#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G
#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G
#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G
#define TIM_EVENTSOURCE_COM TIM_EGR_COMG
#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG
#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG
/**
* @}
*/
/** @defgroup TIM_Flag_definition TIM Flag definition
* @{
*/
#define TIM_FLAG_UPDATE (TIM_SR_UIF)
#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
#define TIM_FLAG_COM (TIM_SR_COMIF)
#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
#define TIM_FLAG_BREAK (TIM_SR_BIF)
#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
/**
* @}
*/
/** @defgroup TIM_Clock_Source TIM Clock Source
* @{
*/
#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
#define TIM_CLOCKSOURCE_ITR0 0x00000000U
#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
/**
* @}
*/
/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
* @{
*/
#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
/**
* @}
*/
/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
* @{
*/
#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
/**
* @}
*/
/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
* @{
*/
#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U
#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U
/**
* @}
*/
/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
* @{
*/
#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
/**
* @}
*/
/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
* @{
*/
#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
/**
* @}
*/
/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
* @{
*/
#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
#define TIM_OSSR_DISABLE 0x00000000U
/**
* @}
*/
/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
* @{
*/
#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
#define TIM_OSSI_DISABLE 0x00000000U
/**
* @}
*/
/** @defgroup TIM_Lock_level TIM Lock level
* @{
*/
#define TIM_LOCKLEVEL_OFF 0x00000000U
#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
/**
* @}
*/
/** @defgroup TIM_Break_Input_enable_disable TIM Break Input State
* @{
*/
#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
#define TIM_BREAK_DISABLE 0x00000000U
/**
* @}
*/
/** @defgroup TIM_Break_Polarity TIM Break Polarity
* @{
*/
#define TIM_BREAKPOLARITY_LOW 0x00000000U
#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
/**
* @}
*/
/** @defgroup TIM_AOE_Bit_Set_Reset TIM AOE Bit State
* @{
*/
#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U
/**
* @}
*/
/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
* @{
*/
#define TIM_TRGO_RESET 0x00000000U
#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
/**
* @}
*/
/** @defgroup TIM_Slave_Mode TIM Slave Mode
* @{
*/
#define TIM_SLAVEMODE_DISABLE 0x00000000U
#define TIM_SLAVEMODE_RESET 0x00000004U
#define TIM_SLAVEMODE_GATED 0x00000005U
#define TIM_SLAVEMODE_TRIGGER 0x00000006U
#define TIM_SLAVEMODE_EXTERNAL1 0x00000007U
/**
* @}
*/
/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
* @{
*/
#define TIM_MASTERSLAVEMODE_ENABLE 0x00000080U
#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U
/**
* @}
*/
/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
* @{
*/
#define TIM_TS_ITR0 0x00000000U
#define TIM_TS_ITR1 0x00000010U
#define TIM_TS_ITR2 0x00000020U
#define TIM_TS_ITR3 0x00000030U
#define TIM_TS_TI1F_ED 0x00000040U
#define TIM_TS_TI1FP1 0x00000050U
#define TIM_TS_TI2FP2 0x00000060U
#define TIM_TS_ETRF 0x00000070U
#define TIM_TS_NONE 0x0000FFFFU
/**
* @}
*/
/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
* @{
*/
#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
/**
* @}
*/
/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
* @{
*/
#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
/**
* @}
*/
/** @defgroup TIM_TI1_Selection TIM TI1 Selection
* @{
*/
#define TIM_TI1SELECTION_CH1 0x00000000U
#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
/**
* @}
*/
/** @defgroup TIM_DMA_Base_address TIM DMA Base address
* @{
*/
#define TIM_DMABASE_CR1 0x00000000U
#define TIM_DMABASE_CR2 0x00000001U
#define TIM_DMABASE_SMCR 0x00000002U
#define TIM_DMABASE_DIER 0x00000003U
#define TIM_DMABASE_SR 0x00000004U
#define TIM_DMABASE_EGR 0x00000005U
#define TIM_DMABASE_CCMR1 0x00000006U
#define TIM_DMABASE_CCMR2 0x00000007U
#define TIM_DMABASE_CCER 0x00000008U
#define TIM_DMABASE_CNT 0x00000009U
#define TIM_DMABASE_PSC 0x0000000AU
#define TIM_DMABASE_ARR 0x0000000BU
#define TIM_DMABASE_RCR 0x0000000CU
#define TIM_DMABASE_CCR1 0x0000000DU
#define TIM_DMABASE_CCR2 0x0000000EU
#define TIM_DMABASE_CCR3 0x0000000FU
#define TIM_DMABASE_CCR4 0x00000010U
#define TIM_DMABASE_BDTR 0x00000011U
#define TIM_DMABASE_DCR 0x00000012U
#define TIM_DMABASE_OR 0x00000013U
/**
* @}
*/
/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
* @{
*/
#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U
#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U
#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U
#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U
#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U
#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U
#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U
#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U
#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U
#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U
#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U
#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U
#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U
#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U
#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U
#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U
#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U
#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U
/**
* @}
*/
/** @defgroup DMA_Handle_index DMA Handle index
* @{
*/
#define TIM_DMA_ID_UPDATE ((uint16_t)0x0000) /*!< Index of the DMA handle used for Update DMA requests */
#define TIM_DMA_ID_CC1 ((uint16_t)0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
#define TIM_DMA_ID_CC2 ((uint16_t)0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
#define TIM_DMA_ID_CC3 ((uint16_t)0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
#define TIM_DMA_ID_CC4 ((uint16_t)0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
#define TIM_DMA_ID_COMMUTATION ((uint16_t)0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */
#define TIM_DMA_ID_TRIGGER ((uint16_t)0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */
/**
* @}
*/
/** @defgroup Channel_CC_State Channel CC State
* @{
*/
#define TIM_CCx_ENABLE 0x00000001U
#define TIM_CCx_DISABLE 0x00000000U
#define TIM_CCxN_ENABLE 0x00000004U
#define TIM_CCxN_DISABLE 0x00000000U
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIM_Exported_Macros TIM Exported Macros
* @{
*/
/** @brief Reset TIM handle state
* @param __HANDLE__ TIM handle
* @retval None
*/
#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
/**
* @brief Enable the TIM peripheral.
* @param __HANDLE__ TIM handle
* @retval None
*/
#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
/**
* @brief Enable the TIM main Output.
* @param __HANDLE__ TIM handle
* @retval None
*/
#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
/**
* @brief Disable the TIM peripheral.
* @param __HANDLE__ TIM handle
* @retval None
*/
#define __HAL_TIM_DISABLE(__HANDLE__) \
do { \
if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
{ \
if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
{ \
(__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
} \
} \
} while(0U)
/* The Main Output of a timer instance is disabled only if all the CCx and CCxN
channels have been disabled */
/**
* @brief Disable the TIM main Output.
* @param __HANDLE__ TIM handle
* @retval None
*/
#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
do { \
if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
{ \
if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
{ \
(__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
} \
} \
} while(0U)
/**
* @brief Disable the TIM main Output.
* @param __HANDLE__ TIM handle
* @retval None
* @note The Main Output Enable of a timer instance is disabled unconditionally
*/
#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)
/** @brief Enable the specified TIM interrupt.
* @param __HANDLE__ specifies the TIM Handle.
* @param __INTERRUPT__ specifies the TIM interrupt source to enable.
* This parameter can be one of the following values:
* @arg TIM_IT_UPDATE: Update interrupt
* @arg TIM_IT_CC1: Capture/Compare 1 interrupt
* @arg TIM_IT_CC2: Capture/Compare 2 interrupt
* @arg TIM_IT_CC3: Capture/Compare 3 interrupt
* @arg TIM_IT_CC4: Capture/Compare 4 interrupt
* @arg TIM_IT_COM: Commutation interrupt
* @arg TIM_IT_TRIGGER: Trigger interrupt
* @arg TIM_IT_BREAK: Break interrupt
* @retval None
*/
#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
/** @brief Disable the specified TIM interrupt.
* @param __HANDLE__ specifies the TIM Handle.
* @param __INTERRUPT__ specifies the TIM interrupt source to disable.
* This parameter can be one of the following values:
* @arg TIM_IT_UPDATE: Update interrupt
* @arg TIM_IT_CC1: Capture/Compare 1 interrupt
* @arg TIM_IT_CC2: Capture/Compare 2 interrupt
* @arg TIM_IT_CC3: Capture/Compare 3 interrupt
* @arg TIM_IT_CC4: Capture/Compare 4 interrupt
* @arg TIM_IT_COM: Commutation interrupt
* @arg TIM_IT_TRIGGER: Trigger interrupt
* @arg TIM_IT_BREAK: Break interrupt
* @retval None
*/
#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
/** @brief Enable the specified DMA request.
* @param __HANDLE__ specifies the TIM Handle.
* @param __DMA__ specifies the TIM DMA request to enable.
* This parameter can be one of the following values:
* @arg TIM_DMA_UPDATE: Update DMA request
* @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
* @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
* @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
* @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
* @arg TIM_DMA_COM: Commutation DMA request
* @arg TIM_DMA_TRIGGER: Trigger DMA request
* @retval None
*/
#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
/** @brief Disable the specified DMA request.
* @param __HANDLE__ specifies the TIM Handle.
* @param __DMA__ specifies the TIM DMA request to disable.
* This parameter can be one of the following values:
* @arg TIM_DMA_UPDATE: Update DMA request
* @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
* @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
* @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
* @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
* @arg TIM_DMA_COM: Commutation DMA request
* @arg TIM_DMA_TRIGGER: Trigger DMA request
* @retval None
*/
#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
/** @brief Check whether the specified TIM interrupt flag is set or not.
* @param __HANDLE__ specifies the TIM Handle.
* @param __FLAG__ specifies the TIM interrupt flag to check.
* This parameter can be one of the following values:
* @arg TIM_FLAG_UPDATE: Update interrupt flag
* @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
* @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
* @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
* @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
* @arg TIM_FLAG_CC5: Compare 5 interrupt flag
* @arg TIM_FLAG_CC6: Compare 6 interrupt flag
* @arg TIM_FLAG_COM: Commutation interrupt flag
* @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
* @arg TIM_FLAG_BREAK: Break interrupt flag
* @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
* @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag
* @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
* @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
* @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
* @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
/** @brief Clear the specified TIM interrupt flag.
* @param __HANDLE__ specifies the TIM Handle.
* @param __FLAG__ specifies the TIM interrupt flag to clear.
* This parameter can be one of the following values:
* @arg TIM_FLAG_UPDATE: Update interrupt flag
* @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
* @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
* @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
* @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
* @arg TIM_FLAG_CC5: Compare 5 interrupt flag
* @arg TIM_FLAG_CC6: Compare 6 interrupt flag
* @arg TIM_FLAG_COM: Commutation interrupt flag
* @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
* @arg TIM_FLAG_BREAK: Break interrupt flag
* @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
* @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag
* @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
* @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
* @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
* @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
/**
* @brief Check whether the specified TIM interrupt source is enabled or not.
* @param __HANDLE__ TIM handle
* @param __INTERRUPT__ specifies the TIM interrupt source to check.
* This parameter can be one of the following values:
* @arg TIM_IT_UPDATE: Update interrupt
* @arg TIM_IT_CC1: Capture/Compare 1 interrupt
* @arg TIM_IT_CC2: Capture/Compare 2 interrupt
* @arg TIM_IT_CC3: Capture/Compare 3 interrupt
* @arg TIM_IT_CC4: Capture/Compare 4 interrupt
* @arg TIM_IT_COM: Commutation interrupt
* @arg TIM_IT_TRIGGER: Trigger interrupt
* @arg TIM_IT_BREAK: Break interrupt
* @retval The state of TIM_IT (SET or RESET).
*/
#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Clear the TIM interrupt pending bits.
* @param __HANDLE__ TIM handle
* @param __INTERRUPT__ specifies the interrupt pending bit to clear.
* This parameter can be one of the following values:
* @arg TIM_IT_UPDATE: Update interrupt
* @arg TIM_IT_CC1: Capture/Compare 1 interrupt
* @arg TIM_IT_CC2: Capture/Compare 2 interrupt
* @arg TIM_IT_CC3: Capture/Compare 3 interrupt
* @arg TIM_IT_CC4: Capture/Compare 4 interrupt
* @arg TIM_IT_COM: Commutation interrupt
* @arg TIM_IT_TRIGGER: Trigger interrupt
* @arg TIM_IT_BREAK: Break interrupt
* @retval None
*/
#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
/**
* @brief Indicates whether or not the TIM Counter is used as downcounter.
* @param __HANDLE__ TIM handle.
* @retval False (Counter used as upcounter) or True (Counter used as downcounter)
* @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
mode.
*/
#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
/**
* @brief Set the TIM Prescaler on runtime.
* @param __HANDLE__ TIM handle.
* @param __PRESC__ specifies the Prescaler new value.
* @retval None
*/
#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U) & TIM_CCER_CC4P)))
#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
/**
* @brief Sets the TIM Capture Compare Register value on runtime without
* calling another time ConfigChannel function.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
* @param __COMPARE__ specifies the Capture Compare register new value.
* @retval None
*/
#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)) = (__COMPARE__))
/**
* @brief Gets the TIM Capture Compare Register value on runtime.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channel associated with the capture compare register
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: get capture/compare 1 register value
* @arg TIM_CHANNEL_2: get capture/compare 2 register value
* @arg TIM_CHANNEL_3: get capture/compare 3 register value
* @arg TIM_CHANNEL_4: get capture/compare 4 register value
* @arg TIM_CHANNEL_5: get capture/compare 5 register value
* @arg TIM_CHANNEL_6: get capture/compare 6 register value
* @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy)
*/
#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)))
/**
* @brief Sets the TIM Counter Register value on runtime.
* @param __HANDLE__ TIM handle.
* @param __COUNTER__ specifies the Counter register new value.
* @retval None
*/
#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
/**
* @brief Gets the TIM Counter Register value on runtime.
* @param __HANDLE__ TIM handle.
* @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT)
*/
#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
/**
* @brief Sets the TIM Autoreload Register value on runtime without calling
* another time any Init function.
* @param __HANDLE__ TIM handle.
* @param __AUTORELOAD__ specifies the Counter register new value.
* @retval None
*/
#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
do{ \
(__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
(__HANDLE__)->Init.Period = (__AUTORELOAD__); \
} while(0U)
/**
* @brief Gets the TIM Autoreload Register value on runtime.
* @param __HANDLE__ TIM handle.
* @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)
*/
#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
/**
* @brief Sets the TIM Clock Division value on runtime without calling another time any Init function.
* @param __HANDLE__ TIM handle.
* @param __CKD__ specifies the clock division value.
* This parameter can be one of the following value:
* @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
* @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
* @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
* @retval None
*/
#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
do{ \
(__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
(__HANDLE__)->Instance->CR1 |= (__CKD__); \
(__HANDLE__)->Init.ClockDivision = (__CKD__); \
} while(0U)
/**
* @brief Gets the TIM Clock Division value on runtime.
* @param __HANDLE__ TIM handle.
* @retval The clock division can be one of the following values:
* @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
* @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
* @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
*/
#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
/**
* @brief Sets the TIM Input Capture prescaler on runtime without calling
* another time HAL_TIM_IC_ConfigChannel() function.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
* @param __ICPSC__ specifies the Input Capture4 prescaler new value.
* This parameter can be one of the following values:
* @arg TIM_ICPSC_DIV1: no prescaler
* @arg TIM_ICPSC_DIV2: capture is done once every 2 events
* @arg TIM_ICPSC_DIV4: capture is done once every 4 events
* @arg TIM_ICPSC_DIV8: capture is done once every 8 events
* @retval None
*/
#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
do{ \
TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
} while(0U)
/**
* @brief Get the TIM Input Capture prescaler on runtime.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: get input capture 1 prescaler value
* @arg TIM_CHANNEL_2: get input capture 2 prescaler value
* @arg TIM_CHANNEL_3: get input capture 3 prescaler value
* @arg TIM_CHANNEL_4: get input capture 4 prescaler value
* @retval The input capture prescaler can be one of the following values:
* @arg TIM_ICPSC_DIV1: no prescaler
* @arg TIM_ICPSC_DIV2: capture is done once every 2 events
* @arg TIM_ICPSC_DIV4: capture is done once every 4 events
* @arg TIM_ICPSC_DIV8: capture is done once every 8 events
*/
#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
(((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
/**
* @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
* @param __HANDLE__ TIM handle.
* @note When the USR bit of the TIMx_CR1 register is set, only counter
* overflow/underflow generates an update interrupt or DMA request (if
* enabled)
* @retval None
*/
#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
/**
* @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
* @param __HANDLE__ TIM handle.
* @note When the USR bit of the TIMx_CR1 register is reset, any of the
* following events generate an update interrupt or DMA request (if
* enabled):
* _ Counter overflow/underflow
* _ Setting the UG bit
* _ Update generation through the slave mode controller
* @retval None
*/
#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
/**
* @brief Sets the TIM Capture x input polarity on runtime.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
* @param __POLARITY__ Polarity for TIx source
* @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
* @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
* @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
* @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4.
* @retval None
*/
#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
do{ \
TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
}while(0U)
/**
* @}
*/
/* Include TIM HAL Extension module */
#include "stm32f4xx_hal_tim_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIM_Exported_Functions
* @{
*/
/** @addtogroup TIM_Exported_Functions_Group1
* @{
*/
/* Time Base functions ********************************************************/
HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group2
* @{
*/
/* Timer Output Compare functions **********************************************/
HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group3
* @{
*/
/* Timer PWM functions *********************************************************/
HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group4
* @{
*/
/* Timer Input Capture functions ***********************************************/
HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group5
* @{
*/
/* Timer One Pulse functions ***************************************************/
HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group6
* @{
*/
/* Timer Encoder functions *****************************************************/
HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group7
* @{
*/
/* Interrupt Handler functions **********************************************/
void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group8
* @{
*/
/* Control functions *********************************************************/
HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group9
* @{
*/
/* Callback in non blocking modes (Interrupt and DMA) *************************/
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIM_Exported_Functions_Group10
* @{
*/
/* Peripheral State functions **************************************************/
HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup TIM_Private_Macros TIM Private Macros
* @{
*/
/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
* @{
*/
#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
((MODE) == TIM_COUNTERMODE_DOWN) || \
((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
((DIV) == TIM_CLOCKDIVISION_DIV2) || \
((DIV) == TIM_CLOCKDIVISION_DIV4))
#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
((MODE) == TIM_OCMODE_PWM2))
#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
((MODE) == TIM_OCMODE_ACTIVE) || \
((MODE) == TIM_OCMODE_INACTIVE) || \
((MODE) == TIM_OCMODE_TOGGLE) || \
((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
((MODE) == TIM_OCMODE_FORCED_INACTIVE))
#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
((STATE) == TIM_OCFAST_ENABLE))
#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
((POLARITY) == TIM_OCPOLARITY_LOW))
#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
((POLARITY) == TIM_OCNPOLARITY_LOW))
#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
((STATE) == TIM_OCIDLESTATE_RESET))
#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
((STATE) == TIM_OCNIDLESTATE_RESET))
#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
((CHANNEL) == TIM_CHANNEL_2) || \
((CHANNEL) == TIM_CHANNEL_3) || \
((CHANNEL) == TIM_CHANNEL_4) || \
((CHANNEL) == TIM_CHANNEL_ALL))
#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
((CHANNEL) == TIM_CHANNEL_2))
#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
((CHANNEL) == TIM_CHANNEL_2) || \
((CHANNEL) == TIM_CHANNEL_3))
#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
((POLARITY) == TIM_ICPOLARITY_FALLING) || \
((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
((SELECTION) == TIM_ICSELECTION_TRC))
#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
((PRESCALER) == TIM_ICPSC_DIV2) || \
((PRESCALER) == TIM_ICPSC_DIV4) || \
((PRESCALER) == TIM_ICPSC_DIV8))
#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
((MODE) == TIM_OPMODE_REPETITIVE))
#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FFU) == 0x00000000U) && ((SOURCE) != 0x00000000U))
#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
((MODE) == TIM_ENCODERMODE_TI2) || \
((MODE) == TIM_ENCODERMODE_TI12))
#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00U) == 0x00000000U) && ((SOURCE) != 0x00000000U))
#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
((STATE) == TIM_OSSR_DISABLE))
#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
((STATE) == TIM_OSSI_DISABLE))
#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
((LEVEL) == TIM_LOCKLEVEL_1) || \
((LEVEL) == TIM_LOCKLEVEL_2) || \
((LEVEL) == TIM_LOCKLEVEL_3))
#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
((STATE) == TIM_BREAK_DISABLE))
#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
((POLARITY) == TIM_BREAKPOLARITY_HIGH))
#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
((SOURCE) == TIM_TRGO_ENABLE) || \
((SOURCE) == TIM_TRGO_UPDATE) || \
((SOURCE) == TIM_TRGO_OC1) || \
((SOURCE) == TIM_TRGO_OC1REF) || \
((SOURCE) == TIM_TRGO_OC2REF) || \
((SOURCE) == TIM_TRGO_OC3REF) || \
((SOURCE) == TIM_TRGO_OC4REF))
#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
((MODE) == TIM_SLAVEMODE_GATED) || \
((MODE) == TIM_SLAVEMODE_RESET) || \
((MODE) == TIM_SLAVEMODE_TRIGGER) || \
((MODE) == TIM_SLAVEMODE_EXTERNAL1))
#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
((SELECTION) == TIM_TS_ITR1) || \
((SELECTION) == TIM_TS_ITR2) || \
((SELECTION) == TIM_TS_ITR3) || \
((SELECTION) == TIM_TS_TI1F_ED) || \
((SELECTION) == TIM_TS_TI1FP1) || \
((SELECTION) == TIM_TS_TI2FP2) || \
((SELECTION) == TIM_TS_ETRF))
#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
((SELECTION) == TIM_TS_ITR1) || \
((SELECTION) == TIM_TS_ITR2) || \
((SELECTION) == TIM_TS_ITR3) || \
((SELECTION) == TIM_TS_NONE))
#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
((BASE) == TIM_DMABASE_CR2) || \
((BASE) == TIM_DMABASE_SMCR) || \
((BASE) == TIM_DMABASE_DIER) || \
((BASE) == TIM_DMABASE_SR) || \
((BASE) == TIM_DMABASE_EGR) || \
((BASE) == TIM_DMABASE_CCMR1) || \
((BASE) == TIM_DMABASE_CCMR2) || \
((BASE) == TIM_DMABASE_CCER) || \
((BASE) == TIM_DMABASE_CNT) || \
((BASE) == TIM_DMABASE_PSC) || \
((BASE) == TIM_DMABASE_ARR) || \
((BASE) == TIM_DMABASE_RCR) || \
((BASE) == TIM_DMABASE_CCR1) || \
((BASE) == TIM_DMABASE_CCR2) || \
((BASE) == TIM_DMABASE_CCR3) || \
((BASE) == TIM_DMABASE_CCR4) || \
((BASE) == TIM_DMABASE_BDTR) || \
((BASE) == TIM_DMABASE_DCR) || \
((BASE) == TIM_DMABASE_OR))
#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \
((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS))
#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
/**
* @}
*/
/** @defgroup TIM_Mask_Definitions TIM Mask Definition
* @{
*/
/* The counter of a timer instance is disabled only if all the CCx and CCxN
channels have been disabled */
#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup TIM_Private_Functions TIM Private Functions
* @{
*/
void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
void TIM_DMAError(DMA_HandleTypeDef *hdma);
void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_TIM_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_tim_ex.h
* @author MCD Application Team
* @brief Header file of TIM HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_TIM_EX_H
#define __STM32F4xx_HAL_TIM_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup TIMEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Types TIM Exported Types
* @{
*/
/**
* @brief TIM Hall sensor Configuration Structure definition
*/
typedef struct
{
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint32_t IC1Filter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
} TIM_HallSensor_InitTypeDef;
/**
* @brief TIM Master configuration Structure definition
*/
typedef struct {
uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
This parameter can be a value of @ref TIM_Master_Mode_Selection */
uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
This parameter can be a value of @ref TIM_Master_Slave_Mode */
}TIM_MasterConfigTypeDef;
/**
* @brief TIM Break and Dead time configuration Structure definition
*/
typedef struct
{
uint32_t OffStateRunMode; /*!< TIM off state in run mode.
This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
uint32_t LockLevel; /*!< TIM Lock level.
This parameter can be a value of @ref TIM_Lock_level */
uint32_t DeadTime; /*!< TIM dead Time.
This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
uint32_t BreakState; /*!< TIM Break State.
This parameter can be a value of @ref TIM_Break_Input_enable_disable */
uint32_t BreakPolarity; /*!< TIM Break input polarity.
This parameter can be a value of @ref TIM_Break_Polarity */
uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state.
This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
}TIM_BreakDeadTimeConfigTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIM Exported Constants
* @{
*/
/** @defgroup TIMEx_Remap TIM Remap
* @{
*/
#define TIM_TIM2_TIM8_TRGO 0x00000000U
#define TIM_TIM2_ETH_PTP 0x00000400U
#define TIM_TIM2_USBFS_SOF 0x00000800U
#define TIM_TIM2_USBHS_SOF 0x00000C00U
#define TIM_TIM5_GPIO 0x00000000U
#define TIM_TIM5_LSI 0x00000040U
#define TIM_TIM5_LSE 0x00000080U
#define TIM_TIM5_RTC 0x000000C0U
#define TIM_TIM11_GPIO 0x00000000U
#define TIM_TIM11_HSE 0x00000002U
#if defined(STM32F413xx) || defined(STM32F423xx)
#define TIM_TIM9_TIM3_TRGO 0x10000000U
#define TIM_TIM9_LPTIM 0x10000010U
#define TIM_TIM5_TIM3_TRGO 0x10000000U
#define TIM_TIM5_LPTIM 0x10000008U
#define TIM_TIM1_TIM3_TRGO 0x10000000U
#define TIM_TIM1_LPTIM 0x10000004U
#endif /* STM32F413xx | STM32F423xx */
#if defined (STM32F446xx)
#define TIM_TIM11_SPDIFRX 0x00000001U
#endif /* STM32F446xx */
/**
* @}
*/
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
/** @defgroup TIMEx_SystemBreakInput TIM System Break Input
* @{
*/
#define TIM_SYSTEMBREAKINPUT_HARDFAULT 0x00000001U /* Core Lockup lock output(Hardfault) is connected to Break Input of TIM1 and TIM8 */
#define TIM_SYSTEMBREAKINPUT_PVD 0x00000004U /* PVD Interrupt is connected to Break Input of TIM1 and TIM8 */
#define TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD 0x00000005U /* Core Lockup lock output(Hardfault) and PVD Interrupt are connected to Break Input of TIM1 and TIM8 */
/**
* @}
*/
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions
* @{
*/
/** @addtogroup TIMEx_Exported_Functions_Group1
* @{
*/
/* Timer Hall Sensor functions **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group2
* @{
*/
/* Timer Complementary Output Compare functions *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group3
* @{
*/
/* Timer Complementary PWM functions ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group4
* @{
*/
/* Timer Complementary One Pulse functions **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group5
* @{
*/
/* Extension Control functions ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group6
* @{
*/
/* Extension Callback *********************************************************/
void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group7
* @{
*/
/* Extension Peripheral State functions **************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup TIMEx_Private_Macros TIM Private Macros
* @{
*/
#if defined (STM32F446xx)
#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
((TIM_REMAP) == TIM_TIM5_GPIO)||\
((TIM_REMAP) == TIM_TIM5_LSI)||\
((TIM_REMAP) == TIM_TIM5_LSE)||\
((TIM_REMAP) == TIM_TIM5_RTC)||\
((TIM_REMAP) == TIM_TIM11_GPIO)||\
((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\
((TIM_REMAP) == TIM_TIM11_HSE))
#elif defined(STM32F413xx) || defined(STM32F423xx)
#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
((TIM_REMAP) == TIM_TIM5_GPIO)||\
((TIM_REMAP) == TIM_TIM5_LSI)||\
((TIM_REMAP) == TIM_TIM5_LSE)||\
((TIM_REMAP) == TIM_TIM5_RTC)||\
((TIM_REMAP) == TIM_TIM11_GPIO)||\
((TIM_REMAP) == TIM_TIM11_HSE)||\
((TIM_REMAP) == TIM_TIM9_TIM3_TRGO)||\
((TIM_REMAP) == TIM_TIM9_LPTIM)||\
((TIM_REMAP) == TIM_TIM5_TIM3_TRGO)||\
((TIM_REMAP) == TIM_TIM5_LPTIM)||\
((TIM_REMAP) == TIM_TIM1_TIM3_TRGO)||\
((TIM_REMAP) == TIM_TIM1_LPTIM))
#else
#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
((TIM_REMAP) == TIM_TIM5_GPIO)||\
((TIM_REMAP) == TIM_TIM5_LSI)||\
((TIM_REMAP) == TIM_TIM5_LSE)||\
((TIM_REMAP) == TIM_TIM5_RTC)||\
((TIM_REMAP) == TIM_TIM11_GPIO)||\
((TIM_REMAP) == TIM_TIM11_HSE))
#endif /* STM32F446xx */
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
#define IS_TIM_SYSTEMBREAKINPUT(BREAKINPUT) (((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT)||\
((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_PVD)||\
((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD))
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFFU)
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup TIMEx_Private_Functions TIM Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_TIM_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_uart.h
* @author MCD Application Team
* @brief Header file of UART HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_UART_H
#define __STM32F4xx_HAL_UART_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup UART
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup UART_Exported_Types UART Exported Types
* @{
*/
/**
* @brief UART Init Structure definition
*/
typedef struct
{
uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
The baud rate is computed using the following formula:
- IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref UART_Word_Length */
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref UART_Stop_Bits */
uint32_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref UART_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref UART_Mode */
uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
or disabled.
This parameter can be a value of @ref UART_Hardware_Flow_Control */
uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
This parameter can be a value of @ref UART_Over_Sampling */
}UART_InitTypeDef;
/**
* @brief HAL UART State structures definition
* @note HAL UART State value is a combination of 2 different substates: gState and RxState.
* - gState contains UART state information related to global Handle management
* and also information related to Tx operations.
* gState value coding follow below described bitmap :
* b7-b6 Error information
* 00 : No Error
* 01 : (Not Used)
* 10 : Timeout
* 11 : Error
* b5 IP initilisation status
* 0 : Reset (IP not initialized)
* 1 : Init done (IP not initialized. HAL UART Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
* 0 : Ready
* 1 : Busy (IP busy with some configuration or internal operations)
* b1 (not used)
* x : Should be set to 0
* b0 Tx state
* 0 : Ready (no Tx operation ongoing)
* 1 : Busy (Tx operation ongoing)
* - RxState contains information related to Rx operations.
* RxState value coding follow below described bitmap :
* b7-b6 (not used)
* xx : Should be set to 00
* b5 IP initilisation status
* 0 : Reset (IP not initialized)
* 1 : Init done (IP not initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
* 0 : Ready (no Rx operation ongoing)
* 1 : Busy (Rx operation ongoing)
* b0 (not used)
* x : Should be set to 0.
*/
typedef enum
{
HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
Value is allowed for gState and RxState */
HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
Value is allowed for gState and RxState */
HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
Value is allowed for gState only */
HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
Value is allowed for gState only */
HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
Value is allowed for RxState only */
HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
Not to be used for neither gState nor RxState.
Value is result of combination (Or) between gState and RxState values */
HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
Value is allowed for gState only */
HAL_UART_STATE_ERROR = 0xE0U /*!< Error
Value is allowed for gState only */
}HAL_UART_StateTypeDef;
/**
* @brief UART handle Structure definition
*/
typedef struct
{
USART_TypeDef *Instance; /*!< UART registers base address */
UART_InitTypeDef Init; /*!< UART communication parameters */
uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
uint16_t TxXferSize; /*!< UART Tx Transfer size */
__IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
uint16_t RxXferSize; /*!< UART Rx Transfer size */
__IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
and also related to Tx operations.
This parameter can be a value of @ref HAL_UART_StateTypeDef */
__IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
This parameter can be a value of @ref HAL_UART_StateTypeDef */
__IO uint32_t ErrorCode; /*!< UART Error code */
}UART_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup UART_Exported_Constants UART Exported constants
* @{
*/
/** @defgroup UART_Error_Code UART Error Code
* @brief UART Error Code
* @{
*/
#define HAL_UART_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_UART_ERROR_PE 0x00000001U /*!< Parity error */
#define HAL_UART_ERROR_NE 0x00000002U /*!< Noise error */
#define HAL_UART_ERROR_FE 0x00000004U /*!< Frame error */
#define HAL_UART_ERROR_ORE 0x00000008U /*!< Overrun error */
#define HAL_UART_ERROR_DMA 0x00000010U /*!< DMA transfer error */
/**
* @}
*/
/** @defgroup UART_Word_Length UART Word Length
* @{
*/
#define UART_WORDLENGTH_8B 0x00000000U
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
/**
* @}
*/
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
* @{
*/
#define UART_STOPBITS_1 0x00000000U
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
/**
* @}
*/
/** @defgroup UART_Parity UART Parity
* @{
*/
#define UART_PARITY_NONE 0x00000000U
#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
/**
* @}
*/
/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
* @{
*/
#define UART_HWCONTROL_NONE 0x00000000U
#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
/**
* @}
*/
/** @defgroup UART_Mode UART Transfer Mode
* @{
*/
#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
/**
* @}
*/
/** @defgroup UART_State UART State
* @{
*/
#define UART_STATE_DISABLE 0x00000000U
#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
/**
* @}
*/
/** @defgroup UART_Over_Sampling UART Over Sampling
* @{
*/
#define UART_OVERSAMPLING_16 0x00000000U
#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
/**
* @}
*/
/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
* @{
*/
#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U
#define UART_LINBREAKDETECTLENGTH_11B 0x00000020U
/**
* @}
*/
/** @defgroup UART_WakeUp_functions UART Wakeup Functions
* @{
*/
#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U
#define UART_WAKEUPMETHOD_ADDRESSMARK 0x00000800U
/**
* @}
*/
/** @defgroup UART_Flags UART FLags
* Elements values convention: 0xXXXX
* - 0xXXXX : Flag mask in the SR register
* @{
*/
#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
/**
* @}
*/
/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
* Elements values convention: 0xY000XXXX
* - XXXX : Interrupt mask (16 bits) in the Y register
* - Y : Interrupt source register (2bits)
* - 0001: CR1 register
* - 0010: CR2 register
* - 0011: CR3 register
*
* @{
*/
#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup UART_Exported_Macros UART Exported Macros
* @{
*/
/** @brief Reset UART handle gstate & RxState
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @retval None
*/
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
} while(0U)
/** @brief Flushes the UART DR register
* @param __HANDLE__ specifies the UART Handle.
*/
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
/** @brief Checks whether the specified UART flag is set or not.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
* @arg UART_FLAG_LBD: LIN Break detection flag
* @arg UART_FLAG_TXE: Transmit data register empty flag
* @arg UART_FLAG_TC: Transmission Complete flag
* @arg UART_FLAG_RXNE: Receive data register not empty flag
* @arg UART_FLAG_IDLE: Idle Line detection flag
* @arg UART_FLAG_ORE: Overrun Error flag
* @arg UART_FLAG_NE: Noise Error flag
* @arg UART_FLAG_FE: Framing Error flag
* @arg UART_FLAG_PE: Parity Error flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/** @brief Clears the specified UART pending flag.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @param __FLAG__ specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
* @arg UART_FLAG_LBD: LIN Break detection flag.
* @arg UART_FLAG_TC: Transmission Complete flag.
* @arg UART_FLAG_RXNE: Receive data register not empty flag.
*
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
* error) and IDLE (Idle line detected) flags are cleared by software
* sequence: a read operation to USART_SR register followed by a read
* operation to USART_DR register.
* @note RXNE flag can be also cleared by a read to the USART_DR register.
* @note TC flag can be also cleared by software sequence: a read operation to
* USART_SR register followed by a write operation to USART_DR register.
* @note TXE flag is cleared only by a write to the USART_DR register.
*
* @retval None
*/
#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
/** @brief Clear the UART PE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @retval None
*/
#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
do{ \
__IO uint32_t tmpreg = 0x00U; \
tmpreg = (__HANDLE__)->Instance->SR; \
tmpreg = (__HANDLE__)->Instance->DR; \
UNUSED(tmpreg); \
} while(0U)
/** @brief Clear the UART FE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @retval None
*/
#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clear the UART NE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @retval None
*/
#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clear the UART ORE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @retval None
*/
#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clear the UART IDLE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @retval None
*/
#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Enable the specified UART interrupt.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @param __INTERRUPT__ specifies the UART interrupt source to enable.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg UART_IT_PE: Parity Error interrupt
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
#define UART_IT_MASK 0x0000FFFFU
#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
(((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
/** @brief Disable the specified UART interrupt.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @param __INTERRUPT__ specifies the UART interrupt source to disable.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg UART_IT_PE: Parity Error interrupt
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
(((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
/** @brief Checks whether the specified UART interrupt has occurred or not.
* @param __HANDLE__ specifies the UART Handle.
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
* UART peripheral.
* @param __IT__ specifies the UART interrupt source to check.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg USART_IT_ERR: Error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
/** @brief Enable CTS flow control
* This macro allows to enable CTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be USART1, USART2 or LPUART.
* @retval None
*/
#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
do{ \
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
} while(0U)
/** @brief Disable CTS flow control
* This macro allows to disable CTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be USART1, USART2 or LPUART.
* @retval None
*/
#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
do{ \
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
} while(0U)
/** @brief Enable RTS flow control
* This macro allows to enable RTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be USART1, USART2 or LPUART.
* @retval None
*/
#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
do{ \
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
} while(0U)
/** @brief Disable RTS flow control
* This macro allows to disable RTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be USART1, USART2 or LPUART.
* @retval None
*/
#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
do{ \
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
} while(0U)
/** @brief macros to enables the UART's one bit sample method
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
/** @brief macros to disables the UART's one bit sample method
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
/** @brief Enable UART
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
/** @brief Disable UART
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UART_Exported_Functions
* @{
*/
/** @addtogroup UART_Exported_Functions_Group1
* @{
*/
/* Initialization/de-initialization functions **********************************/
HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
void HAL_UART_MspInit(UART_HandleTypeDef *huart);
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group2
* @{
*/
/* IO operation functions *******************************************************/
HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
/* Transfer Abort functions */
HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart);
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortCpltCallback (UART_HandleTypeDef *huart);
void HAL_UART_AbortTransmitCpltCallback (UART_HandleTypeDef *huart);
void HAL_UART_AbortReceiveCpltCallback (UART_HandleTypeDef *huart);
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group4
* @{
*/
/* Peripheral State functions **************************************************/
HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup UART_Private_Constants UART Private Constants
* @{
*/
/** @brief UART interruptions flag mask
*
*/
#define UART_CR1_REG_INDEX 1U
#define UART_CR2_REG_INDEX 2U
#define UART_CR3_REG_INDEX 3U
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup UART_Private_Macros UART Private Macros
* @{
*/
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
((STOPBITS) == UART_STOPBITS_2))
#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
((PARITY) == UART_PARITY_EVEN) || \
((PARITY) == UART_PARITY_ODD))
#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
(((CONTROL) == UART_HWCONTROL_NONE) || \
((CONTROL) == UART_HWCONTROL_RTS) || \
((CONTROL) == UART_HWCONTROL_CTS) || \
((CONTROL) == UART_HWCONTROL_RTS_CTS))
#define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U))
#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
((STATE) == UART_STATE_ENABLE))
#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
((SAMPLING) == UART_OVERSAMPLING_8))
#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
/* UART BRR = mantissa + overflow + fraction
= (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U + 50U) / 100U)
/* UART BRR = mantissa + overflow + fraction
= (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup UART_Private_Functions UART Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_UART_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal.c
* @author MCD Application Team
* @brief HAL module driver.
* This is the common part of the HAL initialization
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The common HAL driver contains a set of generic and common APIs that can be
used by the PPP peripheral drivers and the user to start using the HAL.
[..]
The HAL contains two APIs' categories:
(+) Common HAL APIs
(+) Services HAL APIs
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup HAL HAL
* @brief HAL module driver.
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup HAL_Private_Constants
* @{
*/
/**
* @brief STM32F4xx HAL Driver version number V1.7.2
*/
#define __STM32F4xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define __STM32F4xx_HAL_VERSION_SUB1 (0x07U) /*!< [23:16] sub1 version */
#define __STM32F4xx_HAL_VERSION_SUB2 (0x02U) /*!< [15:8] sub2 version */
#define __STM32F4xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\
|(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\
|(__STM32F4xx_HAL_VERSION_SUB2 << 8U )\
|(__STM32F4xx_HAL_VERSION_RC))
#define IDCODE_DEVID_MASK 0x00000FFFU
/* ------------ RCC registers bit address in the alias region ----------- */
#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
/* --- MEMRMP Register ---*/
/* Alias word address of UFB_MODE bit */
#define MEMRMP_OFFSET SYSCFG_OFFSET
#define UFB_MODE_BIT_NUMBER SYSCFG_MEMRMP_UFB_MODE_Pos
#define UFB_MODE_BB (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (UFB_MODE_BIT_NUMBER * 4U))
/* --- CMPCR Register ---*/
/* Alias word address of CMP_PD bit */
#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20U)
#define CMP_PD_BIT_NUMBER SYSCFG_CMPCR_CMP_PD_Pos
#define CMPCR_CMP_PD_BB (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32U) + (CMP_PD_BIT_NUMBER * 4U))
/* --- MCHDLYCR Register ---*/
/* Alias word address of BSCKSEL bit */
#define MCHDLYCR_OFFSET (SYSCFG_OFFSET + 0x30U)
#define BSCKSEL_BIT_NUMBER SYSCFG_MCHDLYCR_BSCKSEL_Pos
#define MCHDLYCR_BSCKSEL_BB (uint32_t)(PERIPH_BB_BASE + (MCHDLYCR_OFFSET * 32U) + (BSCKSEL_BIT_NUMBER * 4U))
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup HAL_Private_Variables
* @{
*/
__IO uint32_t uwTick;
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup HAL_Exported_Functions HAL Exported Functions
* @{
*/
/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
* @brief Initialization and de-initialization functions
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initializes the Flash interface the NVIC allocation and initial clock
configuration. It initializes the systick also when timeout is needed
and the backup domain when enabled.
(+) de-Initializes common part of the HAL
(+) Configure The time base source to have 1ms time base with a dedicated
Tick interrupt priority.
(++) Systick timer is used by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
(++) Time base configuration function (HAL_InitTick ()) is called automatically
at the beginning of the program after reset by HAL_Init() or at any time
when clock is configured, by HAL_RCC_ClockConfig().
(++) Source of time base is configured to generate interrupts at regular
time intervals. Care must be taken if HAL_Delay() is called from a
peripheral ISR process, the Tick interrupt line must have higher priority
(numerically lower) than the peripheral interrupt. Otherwise the caller
ISR process will be blocked.
(++) functions affecting time base configurations are declared as __weak
to make override possible in case of other implementations in user file.
@endverbatim
* @{
*/
/**
* @brief This function is used to initialize the HAL Library; it must be the first
* instruction to be executed in the main program (before to call any other
* HAL function), it performs the following:
* Configure the Flash prefetch, instruction and Data caches.
* Configures the SysTick to generate an interrupt each 1 millisecond,
* which is clocked by the HSI (at this stage, the clock is not yet
* configured and thus the system is running from the internal HSI at 16 MHz).
* Set NVIC Group Priority to 4.
* Calls the HAL_MspInit() callback function defined in user file
* "stm32f4xx_hal_msp.c" to do the global low level hardware initialization
*
* @note SysTick is used as time base for the HAL_Delay() function, the application
* need to ensure that the SysTick time base is always set to 1 millisecond
* to have correct HAL operation.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_Init(void)
{
/* Configure Flash prefetch, Instruction cache, Data cache */
#if (INSTRUCTION_CACHE_ENABLE != 0U)
__HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
#endif /* INSTRUCTION_CACHE_ENABLE */
#if (DATA_CACHE_ENABLE != 0U)
__HAL_FLASH_DATA_CACHE_ENABLE();
#endif /* DATA_CACHE_ENABLE */
#if (PREFETCH_ENABLE != 0U)
__HAL_FLASH_PREFETCH_BUFFER_ENABLE();
#endif /* PREFETCH_ENABLE */
/* Set Interrupt Group Priority */
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
/* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
HAL_InitTick(TICK_INT_PRIORITY);
/* Init the low level hardware */
HAL_MspInit();
/* Return function status */
return HAL_OK;
}
/**
* @brief This function de-Initializes common part of the HAL and stops the systick.
* This function is optional.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DeInit(void)
{
/* Reset of all peripherals */
__HAL_RCC_APB1_FORCE_RESET();
__HAL_RCC_APB1_RELEASE_RESET();
__HAL_RCC_APB2_FORCE_RESET();
__HAL_RCC_APB2_RELEASE_RESET();
__HAL_RCC_AHB1_FORCE_RESET();
__HAL_RCC_AHB1_RELEASE_RESET();
__HAL_RCC_AHB2_FORCE_RESET();
__HAL_RCC_AHB2_RELEASE_RESET();
__HAL_RCC_AHB3_FORCE_RESET();
__HAL_RCC_AHB3_RELEASE_RESET();
/* De-Init the low level hardware */
HAL_MspDeInit();
/* Return function status */
return HAL_OK;
}
/**
* @brief Initializes the MSP.
* @retval None
*/
__weak void HAL_MspInit(void)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_MspInit could be implemented in the user file
*/
}
/**
* @brief DeInitializes the MSP.
* @retval None
*/
__weak void HAL_MspDeInit(void)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_MspDeInit could be implemented in the user file
*/
}
/**
* @brief This function configures the source of the time base.
* The time source is configured to have 1ms time base with a dedicated
* Tick interrupt priority.
* @note This function is called automatically at the beginning of program after
* reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
* @note In the default implementation, SysTick timer is the source of time base.
* It is used to generate interrupts at regular time intervals.
* Care must be taken if HAL_Delay() is called from a peripheral ISR process,
* The the SysTick interrupt must have higher priority (numerically lower)
* than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
* The function is declared as __weak to be overwritten in case of other
* implementation in user file.
* @param TickPriority Tick interrupt priority.
* @retval HAL status
*/
__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
{
/*Configure the SysTick to have interrupt in 1ms time basis*/
HAL_SYSTICK_Config(SystemCoreClock/1000U);
/*Configure the SysTick IRQ priority */
HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
* @brief HAL Control functions
*
@verbatim
===============================================================================
##### HAL Control functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Provide a tick value in millisecond
(+) Provide a blocking delay in millisecond
(+) Suspend the time base source interrupt
(+) Resume the time base source interrupt
(+) Get the HAL API driver version
(+) Get the device identifier
(+) Get the device revision identifier
(+) Enable/Disable Debug module during SLEEP mode
(+) Enable/Disable Debug module during STOP mode
(+) Enable/Disable Debug module during STANDBY mode
@endverbatim
* @{
*/
/**
* @brief This function is called to increment a global variable "uwTick"
* used as application time base.
* @note In the default implementation, this variable is incremented each 1ms
* in Systick ISR.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval None
*/
__weak void HAL_IncTick(void)
{
uwTick++;
}
/**
* @brief Provides a tick value in millisecond.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval tick value
*/
__weak uint32_t HAL_GetTick(void)
{
return uwTick;
}
/**
* @brief This function provides minimum delay (in milliseconds) based
* on variable incremented.
* @note In the default implementation , SysTick timer is the source of time base.
* It is used to generate interrupts at regular time intervals where uwTick
* is incremented.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @param Delay specifies the delay time length, in milliseconds.
* @retval None
*/
__weak void HAL_Delay(__IO uint32_t Delay)
{
uint32_t tickstart = HAL_GetTick();
uint32_t wait = Delay;
/* Add a period to guarantee minimum wait */
if (wait < HAL_MAX_DELAY)
{
wait++;
}
while((HAL_GetTick() - tickstart) < wait)
{
}
}
/**
* @brief Suspend Tick increment.
* @note In the default implementation , SysTick timer is the source of time base. It is
* used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
* is called, the SysTick interrupt will be disabled and so Tick increment
* is suspended.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval None
*/
__weak void HAL_SuspendTick(void)
{
/* Disable SysTick Interrupt */
SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
}
/**
* @brief Resume Tick increment.
* @note In the default implementation , SysTick timer is the source of time base. It is
* used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
* is called, the SysTick interrupt will be enabled and so Tick increment
* is resumed.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval None
*/
__weak void HAL_ResumeTick(void)
{
/* Enable SysTick Interrupt */
SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
}
/**
* @brief Returns the HAL revision
* @retval version : 0xXYZR (8bits for each decimal, R for RC)
*/
uint32_t HAL_GetHalVersion(void)
{
return __STM32F4xx_HAL_VERSION;
}
/**
* @brief Returns the device revision identifier.
* @retval Device revision identifier
*/
uint32_t HAL_GetREVID(void)
{
return((DBGMCU->IDCODE) >> 16U);
}
/**
* @brief Returns the device identifier.
* @retval Device identifier
*/
uint32_t HAL_GetDEVID(void)
{
return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
}
/**
* @brief Enable the Debug Module during SLEEP mode
* @retval None
*/
void HAL_DBGMCU_EnableDBGSleepMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Disable the Debug Module during SLEEP mode
* @retval None
*/
void HAL_DBGMCU_DisableDBGSleepMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Enable the Debug Module during STOP mode
* @retval None
*/
void HAL_DBGMCU_EnableDBGStopMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Disable the Debug Module during STOP mode
* @retval None
*/
void HAL_DBGMCU_DisableDBGStopMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Enable the Debug Module during STANDBY mode
* @retval None
*/
void HAL_DBGMCU_EnableDBGStandbyMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Disable the Debug Module during STANDBY mode
* @retval None
*/
void HAL_DBGMCU_DisableDBGStandbyMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Enables the I/O Compensation Cell.
* @note The I/O compensation cell can be used only when the device supply
* voltage ranges from 2.4 to 3.6 V.
* @retval None
*/
void HAL_EnableCompensationCell(void)
{
*(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE;
}
/**
* @brief Power-down the I/O Compensation Cell.
* @note The I/O compensation cell can be used only when the device supply
* voltage ranges from 2.4 to 3.6 V.
* @retval None
*/
void HAL_DisableCompensationCell(void)
{
*(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE;
}
/**
* @brief Return the unique device identifier (UID based on 96 bits)
* @param UID pointer to 3 words array.
* @retval Device identifier
*/
void HAL_GetUID(uint32_t *UID)
{
UID[0] = (uint32_t)(READ_REG(*((uint32_t *)UID_BASE)));
UID[1] = (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
UID[2] = (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
}
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
defined(STM32F469xx) || defined(STM32F479xx)
/**
* @brief Enables the Internal FLASH Bank Swapping.
*
* @note This function can be used only for STM32F42xxx/43xxx devices.
*
* @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
* and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
*
* @retval None
*/
void HAL_EnableMemorySwappingBank(void)
{
*(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE;
}
/**
* @brief Disables the Internal FLASH Bank Swapping.
*
* @note This function can be used only for STM32F42xxx/43xxx devices.
*
* @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000)
* and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
*
* @retval None
*/
void HAL_DisableMemorySwappingBank(void)
{
*(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE;
}
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_adc.c
* @author MCD Application Team
* @brief This file provides firmware functions to manage the following
* functionalities of the Analog to Digital Convertor (ADC) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
* + State and errors functions
*
@verbatim
==============================================================================
##### ADC Peripheral features #####
==============================================================================
[..]
(#) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution.
(#) Interrupt generation at the end of conversion, end of injected conversion,
and in case of analog watchdog or overrun events
(#) Single and continuous conversion modes.
(#) Scan mode for automatic conversion of channel 0 to channel x.
(#) Data alignment with in-built data coherency.
(#) Channel-wise programmable sampling time.
(#) External trigger option with configurable polarity for both regular and
injected conversion.
(#) Dual/Triple mode (on devices with 2 ADCs or more).
(#) Configurable DMA data storage in Dual/Triple ADC mode.
(#) Configurable delay between conversions in Dual/Triple interleaved mode.
(#) ADC conversion type (refer to the datasheets).
(#) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at
slower speed.
(#) ADC input range: VREF(minus) = VIN = VREF(plus).
(#) DMA request generation during regular channel conversion.
##### How to use this driver #####
==============================================================================
[..]
(#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
(##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
(##) ADC pins configuration
(+++) Enable the clock for the ADC GPIOs using the following function:
__HAL_RCC_GPIOx_CLK_ENABLE()
(+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
(##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
(+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
(+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
(+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
(##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
(+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
(+++) Configure and enable two DMA streams stream for managing data
transfer from peripheral to memory (output stream)
(+++) Associate the initialized DMA handle to the CRYP DMA handle
using __HAL_LINKDMA()
(+++) Configure the priority and enable the NVIC for the transfer complete
interrupt on the two DMA Streams. The output stream should have higher
priority than the input stream.
*** Configuration of ADC, groups regular/injected, channels parameters ***
==============================================================================
[..]
(#) Configure the ADC parameters (resolution, data alignment, ...)
and regular group parameters (conversion trigger, sequencer, ...)
using function HAL_ADC_Init().
(#) Configure the channels for regular group parameters (channel number,
channel rank into sequencer, ..., into regular group)
using function HAL_ADC_ConfigChannel().
(#) Optionally, configure the injected group parameters (conversion trigger,
sequencer, ..., of injected group)
and the channels for injected group parameters (channel number,
channel rank into sequencer, ..., into injected group)
using function HAL_ADCEx_InjectedConfigChannel().
(#) Optionally, configure the analog watchdog parameters (channels
monitored, thresholds, ...) using function HAL_ADC_AnalogWDGConfig().
(#) Optionally, for devices with several ADC instances: configure the
multimode parameters using function HAL_ADCEx_MultiModeConfigChannel().
*** Execution of ADC conversions ***
==============================================================================
[..]
(#) ADC driver can be used among three modes: polling, interruption,
transfer by DMA.
*** Polling mode IO operation ***
=================================
[..]
(+) Start the ADC peripheral using HAL_ADC_Start()
(+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
user can specify the value of timeout according to his end application
(+) To read the ADC converted values, use the HAL_ADC_GetValue() function.
(+) Stop the ADC peripheral using HAL_ADC_Stop()
*** Interrupt mode IO operation ***
===================================
[..]
(+) Start the ADC peripheral using HAL_ADC_Start_IT()
(+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
(+) At ADC end of conversion HAL_ADC_ConvCpltCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADC_ConvCpltCallback
(+) In case of ADC Error, HAL_ADC_ErrorCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADC_ErrorCallback
(+) Stop the ADC peripheral using HAL_ADC_Stop_IT()
*** DMA mode IO operation ***
==============================
[..]
(+) Start the ADC peripheral using HAL_ADC_Start_DMA(), at this stage the user specify the length
of data to be transferred at each end of conversion
(+) At The end of data transfer by HAL_ADC_ConvCpltCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADC_ConvCpltCallback
(+) In case of transfer Error, HAL_ADC_ErrorCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADC_ErrorCallback
(+) Stop the ADC peripheral using HAL_ADC_Stop_DMA()
*** ADC HAL driver macros list ***
=============================================
[..]
Below the list of most used macros in ADC HAL driver.
(+) __HAL_ADC_ENABLE : Enable the ADC peripheral
(+) __HAL_ADC_DISABLE : Disable the ADC peripheral
(+) __HAL_ADC_ENABLE_IT: Enable the ADC end of conversion interrupt
(+) __HAL_ADC_DISABLE_IT: Disable the ADC end of conversion interrupt
(+) __HAL_ADC_GET_IT_SOURCE: Check if the specified ADC interrupt source is enabled or disabled
(+) __HAL_ADC_CLEAR_FLAG: Clear the ADC's pending flags
(+) __HAL_ADC_GET_FLAG: Get the selected ADC's flag status
(+) ADC_GET_RESOLUTION: Return resolution bits in CR1 register
[..]
(@) You can refer to the ADC HAL driver header file for more useful macros
*** Deinitialization of ADC ***
==============================================================================
[..]
(#) Disable the ADC interface
(++) ADC clock can be hard reset and disabled at RCC top level.
(++) Hard reset of ADC peripherals
using macro __HAL_RCC_ADC_FORCE_RESET(), __HAL_RCC_ADC_RELEASE_RESET().
(++) ADC clock disable using the equivalent macro/functions as configuration step.
(+++) Example:
Into HAL_ADC_MspDeInit() (recommended code location) or with
other device clock parameters configuration:
(+++) HAL_RCC_GetOscConfig(&RCC_OscInitStructure);
(+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI;
(+++) RCC_OscInitStructure.HSIState = RCC_HSI_OFF; (if not used for system clock)
(+++) HAL_RCC_OscConfig(&RCC_OscInitStructure);
(#) ADC pins configuration
(++) Disable the clock for the ADC GPIOs using macro __HAL_RCC_GPIOx_CLK_DISABLE()
(#) Optionally, in case of usage of ADC with interruptions:
(++) Disable the NVIC for ADC using function HAL_NVIC_DisableIRQ(ADCx_IRQn)
(#) Optionally, in case of usage of DMA:
(++) Deinitialize the DMA using function HAL_DMA_DeInit().
(++) Disable the NVIC for DMA using function HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn)
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup ADC ADC
* @brief ADC driver modules
* @{
*/
#ifdef HAL_ADC_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup ADC_Private_Functions
* @{
*/
/* Private function prototypes -----------------------------------------------*/
static void ADC_Init(ADC_HandleTypeDef* hadc);
static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
static void ADC_DMAError(DMA_HandleTypeDef *hdma);
static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup ADC_Exported_Functions ADC Exported Functions
* @{
*/
/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initialize and configure the ADC.
(+) De-initialize the ADC.
@endverbatim
* @{
*/
/**
* @brief Initializes the ADCx peripheral according to the specified parameters
* in the ADC_InitStruct and initializes the ADC MSP.
*
* @note This function is used to configure the global features of the ADC (
* ClockPrescaler, Resolution, Data Alignment and number of conversion), however,
* the rest of the configuration parameters are specific to the regular
* channels group (scan mode activation, continuous mode activation,
* External trigger source and edge, DMA continuous request after the
* last transfer and End of conversion selection).
*
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc)
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
/* Check ADC handle */
if(hadc == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler));
assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution));
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ScanConvMode));
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
assert_param(IS_ADC_EXT_TRIG(hadc->Init.ExternalTrigConv));
assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign));
assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode));
if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
{
assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
}
if(hadc->State == HAL_ADC_STATE_RESET)
{
/* Initialize ADC error code */
ADC_CLEAR_ERRORCODE(hadc);
/* Allocate lock resource and initialize it */
hadc->Lock = HAL_UNLOCKED;
/* Init the low level hardware */
HAL_ADC_MspInit(hadc);
}
/* Configuration of ADC parameters if previous preliminary actions are */
/* correctly completed. */
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
{
/* Set ADC state */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
HAL_ADC_STATE_BUSY_INTERNAL);
/* Set ADC parameters */
ADC_Init(hadc);
/* Set ADC error code to none */
ADC_CLEAR_ERRORCODE(hadc);
/* Set the ADC state */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_BUSY_INTERNAL,
HAL_ADC_STATE_READY);
}
else
{
tmp_hal_status = HAL_ERROR;
}
/* Release Lock */
__HAL_UNLOCK(hadc);
/* Return function status */
return tmp_hal_status;
}
/**
* @brief Deinitializes the ADCx peripheral registers to their default reset values.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc)
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
/* Check ADC handle */
if(hadc == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
/* Set ADC state */
SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL);
/* Stop potential conversion on going, on regular and injected groups */
/* Disable ADC peripheral */
__HAL_ADC_DISABLE(hadc);
/* Configuration of ADC parameters if previous preliminary actions are */
/* correctly completed. */
if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* DeInit the low level hardware */
HAL_ADC_MspDeInit(hadc);
/* Set ADC error code to none */
ADC_CLEAR_ERRORCODE(hadc);
/* Set ADC state */
hadc->State = HAL_ADC_STATE_RESET;
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return tmp_hal_status;
}
/**
* @brief Initializes the ADC MSP.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hadc);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_ADC_MspInit could be implemented in the user file
*/
}
/**
* @brief DeInitializes the ADC MSP.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hadc);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_ADC_MspDeInit could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup ADC_Exported_Functions_Group2 IO operation functions
* @brief IO operation functions
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Start conversion of regular channel.
(+) Stop conversion of regular channel.
(+) Start conversion of regular channel and enable interrupt.
(+) Stop conversion of regular channel and disable interrupt.
(+) Start conversion of regular channel and enable DMA transfer.
(+) Stop conversion of regular channel and disable DMA transfer.
(+) Handle ADC interrupt request.
@endverbatim
* @{
*/
/**
* @brief Enables ADC and starts conversion of the regular channels.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc)
{
__IO uint32_t counter = 0U;
ADC_Common_TypeDef *tmpADC_Common;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
/* Process locked */
__HAL_LOCK(hadc);
/* Enable the ADC peripheral */
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay for ADC stabilization time */
/* Compute number of CPU cycles to wait for */
counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
while(counter != 0U)
{
counter--;
}
}
/* Start conversion if ADC is effectively enabled */
if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Set ADC state */
/* - Clear state bitfield related to regular group conversion results */
/* - Set state bitfield related to regular group operation */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
HAL_ADC_STATE_REG_BUSY);
/* If conversions on group regular are also triggering group injected, */
/* update ADC state. */
if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
{
ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);
}
/* State machine update: Check if an injected conversion is ongoing */
if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
{
/* Reset ADC error code fields related to conversions on group regular */
CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));
}
else
{
/* Reset ADC all error code fields */
ADC_CLEAR_ERRORCODE(hadc);
}
/* Process unlocked */
/* Unlock before starting ADC conversions: in case of potential */
/* interruption, to let the process to ADC IRQ Handler. */
__HAL_UNLOCK(hadc);
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Clear regular group conversion flag and overrun flag */
/* (To ensure of no unknown state from potential previous ADC operations) */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR);
/* Check if Multimode enabled */
if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI))
{
/* if no external trigger present enable software conversion of regular channels */
if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
{
/* Enable the selected ADC software conversion for regular group */
hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
}
}
else
{
/* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */
if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
{
/* Enable the selected ADC software conversion for regular group */
hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
}
}
}
/* Return function status */
return HAL_OK;
}
/**
* @brief Disables ADC and stop conversion of regular channels.
*
* @note Caution: This function will stop also injected channels.
*
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
*
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc)
{
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
/* Process locked */
__HAL_LOCK(hadc);
/* Stop potential conversion on going, on regular and injected groups */
/* Disable ADC peripheral */
__HAL_ADC_DISABLE(hadc);
/* Check if ADC is effectively disabled */
if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Set ADC state */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
HAL_ADC_STATE_READY);
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Poll for regular conversion complete
* @note ADC conversion flags EOS (end of sequence) and EOC (end of
* conversion) are cleared by this function.
* @note This function cannot be used in a particular setup: ADC configured
* in DMA mode and polling for end of each conversion (ADC init
* parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV).
* In this case, DMA resets the flag EOC and polling cannot be
* performed on each conversion. Nevertheless, polling can still
* be performed on the complete sequence.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param Timeout Timeout value in millisecond.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
{
uint32_t tickstart = 0U;
/* Verification that ADC configuration is compliant with polling for */
/* each conversion: */
/* Particular case is ADC configured in DMA mode and ADC sequencer with */
/* several ranks and polling for end of each conversion. */
/* For code simplicity sake, this particular case is generalized to */
/* ADC configured in DMA mode and polling for end of each conversion. */
if (HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_EOCS) &&
HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_DMA) )
{
/* Update ADC state machine to error */
SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
/* Process unlocked */
__HAL_UNLOCK(hadc);
return HAL_ERROR;
}
/* Get tick */
tickstart = HAL_GetTick();
/* Check End of conversion flag */
while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC)))
{
/* Check if timeout is disabled (set to infinite wait) */
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout))
{
/* Update ADC state machine to timeout */
SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
/* Process unlocked */
__HAL_UNLOCK(hadc);
return HAL_TIMEOUT;
}
}
}
/* Clear regular group conversion flag */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
/* Update ADC state machine */
SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
/* Determine whether any further conversion upcoming on group regular */
/* by external trigger, continuous mode or scan sequence on going. */
/* Note: On STM32F4, there is no independent flag of end of sequence. */
/* The test of scan sequence on going is done either with scan */
/* sequence disabled or with end of conversion flag set to */
/* of end of sequence. */
if(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
(hadc->Init.ContinuousConvMode == DISABLE) &&
(HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) )
{
/* Set ADC state */
CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
{
SET_BIT(hadc->State, HAL_ADC_STATE_READY);
}
}
/* Return ADC state */
return HAL_OK;
}
/**
* @brief Poll for conversion event
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param EventType the ADC event type.
* This parameter can be one of the following values:
* @arg ADC_AWD_EVENT: ADC Analog watch Dog event.
* @arg ADC_OVR_EVENT: ADC Overrun event.
* @param Timeout Timeout value in millisecond.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout)
{
uint32_t tickstart = 0U;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
assert_param(IS_ADC_EVENT_TYPE(EventType));
/* Get tick */
tickstart = HAL_GetTick();
/* Check selected event flag */
while(!(__HAL_ADC_GET_FLAG(hadc,EventType)))
{
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout))
{
/* Update ADC state machine to timeout */
SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
/* Process unlocked */
__HAL_UNLOCK(hadc);
return HAL_TIMEOUT;
}
}
}
/* Analog watchdog (level out of window) event */
if(EventType == ADC_AWD_EVENT)
{
/* Set ADC state */
SET_BIT(hadc->State, HAL_ADC_STATE_AWD1);
/* Clear ADC analog watchdog flag */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
}
/* Overrun event */
else
{
/* Set ADC state */
SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR);
/* Set ADC error code to overrun */
SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR);
/* Clear ADC overrun flag */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
}
/* Return ADC state */
return HAL_OK;
}
/**
* @brief Enables the interrupt and starts ADC conversion of regular channels.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc)
{
__IO uint32_t counter = 0U;
ADC_Common_TypeDef *tmpADC_Common;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
/* Process locked */
__HAL_LOCK(hadc);
/* Enable the ADC peripheral */
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay for ADC stabilization time */
/* Compute number of CPU cycles to wait for */
counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
while(counter != 0U)
{
counter--;
}
}
/* Start conversion if ADC is effectively enabled */
if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Set ADC state */
/* - Clear state bitfield related to regular group conversion results */
/* - Set state bitfield related to regular group operation */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
HAL_ADC_STATE_REG_BUSY);
/* If conversions on group regular are also triggering group injected, */
/* update ADC state. */
if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
{
ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);
}
/* State machine update: Check if an injected conversion is ongoing */
if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
{
/* Reset ADC error code fields related to conversions on group regular */
CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));
}
else
{
/* Reset ADC all error code fields */
ADC_CLEAR_ERRORCODE(hadc);
}
/* Process unlocked */
/* Unlock before starting ADC conversions: in case of potential */
/* interruption, to let the process to ADC IRQ Handler. */
__HAL_UNLOCK(hadc);
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Clear regular group conversion flag and overrun flag */
/* (To ensure of no unknown state from potential previous ADC operations) */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR);
/* Enable end of conversion interrupt for regular group */
__HAL_ADC_ENABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_OVR));
/* Check if Multimode enabled */
if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI))
{
/* if no external trigger present enable software conversion of regular channels */
if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
{
/* Enable the selected ADC software conversion for regular group */
hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
}
}
else
{
/* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */
if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
{
/* Enable the selected ADC software conversion for regular group */
hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
}
}
}
/* Return function status */
return HAL_OK;
}
/**
* @brief Disables the interrupt and stop ADC conversion of regular channels.
*
* @note Caution: This function will stop also injected channels.
*
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc)
{
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
/* Process locked */
__HAL_LOCK(hadc);
/* Stop potential conversion on going, on regular and injected groups */
/* Disable ADC peripheral */
__HAL_ADC_DISABLE(hadc);
/* Check if ADC is effectively disabled */
if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Disable ADC end of conversion interrupt for regular group */
__HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_OVR));
/* Set ADC state */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
HAL_ADC_STATE_READY);
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Handles ADC interrupt request
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
{
uint32_t tmp1 = 0U, tmp2 = 0U;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC);
tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC);
/* Check End of conversion flag for regular channels */
if(tmp1 && tmp2)
{
/* Update state machine on conversion status if not in error state */
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
{
/* Set ADC state */
SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
}
/* Determine whether any further conversion upcoming on group regular */
/* by external trigger, continuous mode or scan sequence on going. */
/* Note: On STM32F4, there is no independent flag of end of sequence. */
/* The test of scan sequence on going is done either with scan */
/* sequence disabled or with end of conversion flag set to */
/* of end of sequence. */
if(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
(hadc->Init.ContinuousConvMode == DISABLE) &&
(HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) )
{
/* Disable ADC end of single conversion interrupt on group regular */
/* Note: Overrun interrupt was enabled with EOC interrupt in */
/* HAL_ADC_Start_IT(), but is not disabled here because can be used */
/* by overrun IRQ process below. */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
/* Set ADC state */
CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
{
SET_BIT(hadc->State, HAL_ADC_STATE_READY);
}
}
/* Conversion complete callback */
HAL_ADC_ConvCpltCallback(hadc);
/* Clear regular group conversion flag */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
}
tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC);
tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_JEOC);
/* Check End of conversion flag for injected channels */
if(tmp1 && tmp2)
{
/* Update state machine on conversion status if not in error state */
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
{
/* Set ADC state */
SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC);
}
/* Determine whether any further conversion upcoming on group injected */
/* by external trigger, scan sequence on going or by automatic injected */
/* conversion from group regular (same conditions as group regular */
/* interruption disabling above). */
if(ADC_IS_SOFTWARE_START_INJECTED(hadc) &&
(HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) ||
HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) &&
(HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) &&
(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
(hadc->Init.ContinuousConvMode == DISABLE) ) ) )
{
/* Disable ADC end of single conversion interrupt on group injected */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
/* Set ADC state */
CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
{
SET_BIT(hadc->State, HAL_ADC_STATE_READY);
}
}
/* Conversion complete callback */
HAL_ADCEx_InjectedConvCpltCallback(hadc);
/* Clear injected group conversion flag */
__HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JSTRT | ADC_FLAG_JEOC));
}
tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD);
tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD);
/* Check Analog watchdog flag */
if(tmp1 && tmp2)
{
if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD))
{
/* Set ADC state */
SET_BIT(hadc->State, HAL_ADC_STATE_AWD1);
/* Level out of window callback */
HAL_ADC_LevelOutOfWindowCallback(hadc);
/* Clear the ADC analog watchdog flag */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
}
}
tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_OVR);
tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_OVR);
/* Check Overrun flag */
if(tmp1 && tmp2)
{
/* Note: On STM32F4, ADC overrun can be set through other parameters */
/* refer to description of parameter "EOCSelection" for more */
/* details. */
/* Set ADC error code to overrun */
SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR);
/* Clear ADC overrun flag */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
/* Error callback */
HAL_ADC_ErrorCallback(hadc);
/* Clear the Overrun flag */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
}
}
/**
* @brief Enables ADC DMA request after last transfer (Single-ADC mode) and enables ADC peripheral
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param pData The destination Buffer address.
* @param Length The length of data to be transferred from ADC peripheral to memory.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
{
__IO uint32_t counter = 0U;
ADC_Common_TypeDef *tmpADC_Common;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
/* Process locked */
__HAL_LOCK(hadc);
/* Enable the ADC peripheral */
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay for ADC stabilization time */
/* Compute number of CPU cycles to wait for */
counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
while(counter != 0U)
{
counter--;
}
}
/* Start conversion if ADC is effectively enabled */
if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Set ADC state */
/* - Clear state bitfield related to regular group conversion results */
/* - Set state bitfield related to regular group operation */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
HAL_ADC_STATE_REG_BUSY);
/* If conversions on group regular are also triggering group injected, */
/* update ADC state. */
if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
{
ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);
}
/* State machine update: Check if an injected conversion is ongoing */
if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
{
/* Reset ADC error code fields related to conversions on group regular */
CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));
}
else
{
/* Reset ADC all error code fields */
ADC_CLEAR_ERRORCODE(hadc);
}
/* Process unlocked */
/* Unlock before starting ADC conversions: in case of potential */
/* interruption, to let the process to ADC IRQ Handler. */
__HAL_UNLOCK(hadc);
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Set the DMA transfer complete callback */
hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt;
/* Set the DMA half transfer complete callback */
hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt;
/* Set the DMA error callback */
hadc->DMA_Handle->XferErrorCallback = ADC_DMAError;
/* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */
/* start (in case of SW start): */
/* Clear regular group conversion flag and overrun flag */
/* (To ensure of no unknown state from potential previous ADC operations) */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR);
/* Enable ADC overrun interrupt */
__HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
/* Enable ADC DMA mode */
hadc->Instance->CR2 |= ADC_CR2_DMA;
/* Start the DMA channel */
HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length);
/* Check if Multimode enabled */
if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI))
{
/* if no external trigger present enable software conversion of regular channels */
if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
{
/* Enable the selected ADC software conversion for regular group */
hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
}
}
else
{
/* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */
if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
{
/* Enable the selected ADC software conversion for regular group */
hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
}
}
}
/* Return function status */
return HAL_OK;
}
/**
* @brief Disables ADC DMA (Single-ADC mode) and disables ADC peripheral
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc)
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
/* Process locked */
__HAL_LOCK(hadc);
/* Stop potential conversion on going, on regular and injected groups */
/* Disable ADC peripheral */
__HAL_ADC_DISABLE(hadc);
/* Check if ADC is effectively disabled */
if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Disable the selected ADC DMA mode */
hadc->Instance->CR2 &= ~ADC_CR2_DMA;
/* Disable the DMA channel (in case of DMA in circular mode or stop while */
/* DMA transfer is on going) */
tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);
/* Disable ADC overrun interrupt */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
/* Set ADC state */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
HAL_ADC_STATE_READY);
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return tmp_hal_status;
}
/**
* @brief Gets the converted value from data register of regular channel.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval Converted value
*/
uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc)
{
/* Return the selected ADC converted value */
return hadc->Instance->DR;
}
/**
* @brief Regular conversion complete callback in non blocking mode
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hadc);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_ADC_ConvCpltCallback could be implemented in the user file
*/
}
/**
* @brief Regular conversion half DMA transfer callback in non blocking mode
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hadc);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_ADC_ConvHalfCpltCallback could be implemented in the user file
*/
}
/**
* @brief Analog watchdog callback in non blocking mode
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hadc);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_ADC_LevelOoutOfWindowCallback could be implemented in the user file
*/
}
/**
* @brief Error ADC callback.
* @note In case of error due to overrun when using ADC with DMA transfer
* (HAL ADC handle paramater "ErrorCode" to state "HAL_ADC_ERROR_OVR"):
* - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()".
* - If needed, restart a new ADC conversion using function
* "HAL_ADC_Start_DMA()"
* (this function is also clearing overrun flag)
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hadc);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_ADC_ErrorCallback could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions
* @brief Peripheral Control functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure regular channels.
(+) Configure injected channels.
(+) Configure multimode.
(+) Configure the analog watch dog.
@endverbatim
* @{
*/
/**
* @brief Configures for the selected ADC regular channel its corresponding
* rank in the sequencer and its sample time.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param sConfig ADC configuration structure.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig)
{
__IO uint32_t counter = 0U;
ADC_Common_TypeDef *tmpADC_Common;
/* Check the parameters */
assert_param(IS_ADC_CHANNEL(sConfig->Channel));
assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank));
assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime));
/* Process locked */
__HAL_LOCK(hadc);
/* if ADC_Channel_10 ... ADC_Channel_18 is selected */
if (sConfig->Channel > ADC_CHANNEL_9)
{
/* Clear the old sample time */
hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfig->Channel);
/* Set the new sample time */
hadc->Instance->SMPR1 |= ADC_SMPR1(sConfig->SamplingTime, sConfig->Channel);
}
else /* ADC_Channel include in ADC_Channel_[0..9] */
{
/* Clear the old sample time */
hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfig->Channel);
/* Set the new sample time */
hadc->Instance->SMPR2 |= ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel);
}
/* For Rank 1 to 6 */
if (sConfig->Rank < 7U)
{
/* Clear the old SQx bits for the selected rank */
hadc->Instance->SQR3 &= ~ADC_SQR3_RK(ADC_SQR3_SQ1, sConfig->Rank);
/* Set the SQx bits for the selected rank */
hadc->Instance->SQR3 |= ADC_SQR3_RK(sConfig->Channel, sConfig->Rank);
}
/* For Rank 7 to 12 */
else if (sConfig->Rank < 13U)
{
/* Clear the old SQx bits for the selected rank */
hadc->Instance->SQR2 &= ~ADC_SQR2_RK(ADC_SQR2_SQ7, sConfig->Rank);
/* Set the SQx bits for the selected rank */
hadc->Instance->SQR2 |= ADC_SQR2_RK(sConfig->Channel, sConfig->Rank);
}
/* For Rank 13 to 16 */
else
{
/* Clear the old SQx bits for the selected rank */
hadc->Instance->SQR1 &= ~ADC_SQR1_RK(ADC_SQR1_SQ13, sConfig->Rank);
/* Set the SQx bits for the selected rank */
hadc->Instance->SQR1 |= ADC_SQR1_RK(sConfig->Channel, sConfig->Rank);
}
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* if ADC1 Channel_18 is selected enable VBAT Channel */
if ((hadc->Instance == ADC1) && (sConfig->Channel == ADC_CHANNEL_VBAT))
{
/* Enable the VBAT channel*/
tmpADC_Common->CCR |= ADC_CCR_VBATE;
}
/* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
if ((hadc->Instance == ADC1) && ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || (sConfig->Channel == ADC_CHANNEL_VREFINT)))
{
/* Enable the TSVREFE channel*/
tmpADC_Common->CCR |= ADC_CCR_TSVREFE;
if((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR))
{
/* Delay for temperature sensor stabilization time */
/* Compute number of CPU cycles to wait for */
counter = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000U));
while(counter != 0U)
{
counter--;
}
}
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Configures the analog watchdog.
* @note Analog watchdog thresholds can be modified while ADC conversion
* is on going.
* In this case, some constraints must be taken into account:
* The programmed threshold values are effective from the next
* ADC EOC (end of unitary conversion).
* Considering that registers write delay may happen due to
* bus activity, this might cause an uncertainty on the
* effective timing of the new programmed threshold values.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param AnalogWDGConfig pointer to an ADC_AnalogWDGConfTypeDef structure
* that contains the configuration information of ADC analog watchdog.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig)
{
#ifdef USE_FULL_ASSERT
uint32_t tmp = 0U;
#endif /* USE_FULL_ASSERT */
/* Check the parameters */
assert_param(IS_ADC_ANALOG_WATCHDOG(AnalogWDGConfig->WatchdogMode));
assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel));
assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode));
#ifdef USE_FULL_ASSERT
tmp = ADC_GET_RESOLUTION(hadc);
assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->HighThreshold));
assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->LowThreshold));
#endif /* USE_FULL_ASSERT */
/* Process locked */
__HAL_LOCK(hadc);
if(AnalogWDGConfig->ITMode == ENABLE)
{
/* Enable the ADC Analog watchdog interrupt */
__HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD);
}
else
{
/* Disable the ADC Analog watchdog interrupt */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD);
}
/* Clear AWDEN, JAWDEN and AWDSGL bits */
hadc->Instance->CR1 &= ~(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN | ADC_CR1_AWDEN);
/* Set the analog watchdog enable mode */
hadc->Instance->CR1 |= AnalogWDGConfig->WatchdogMode;
/* Set the high threshold */
hadc->Instance->HTR = AnalogWDGConfig->HighThreshold;
/* Set the low threshold */
hadc->Instance->LTR = AnalogWDGConfig->LowThreshold;
/* Clear the Analog watchdog channel select bits */
hadc->Instance->CR1 &= ~ADC_CR1_AWDCH;
/* Set the Analog watchdog channel */
hadc->Instance->CR1 |= (uint32_t)((uint16_t)(AnalogWDGConfig->Channel));
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/** @defgroup ADC_Exported_Functions_Group4 ADC Peripheral State functions
* @brief ADC Peripheral State functions
*
@verbatim
===============================================================================
##### Peripheral State and errors functions #####
===============================================================================
[..]
This subsection provides functions allowing to
(+) Check the ADC state
(+) Check the ADC Error
@endverbatim
* @{
*/
/**
* @brief return the ADC state
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL state
*/
uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc)
{
/* Return ADC state */
return hadc->State;
}
/**
* @brief Return the ADC error code
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval ADC Error Code
*/
uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc)
{
return hadc->ErrorCode;
}
/**
* @}
*/
/** @addtogroup ADC_Private_Functions
* @{
*/
/**
* @brief Initializes the ADCx peripheral according to the specified parameters
* in the ADC_InitStruct without initializing the ADC MSP.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
static void ADC_Init(ADC_HandleTypeDef* hadc)
{
ADC_Common_TypeDef *tmpADC_Common;
/* Set ADC parameters */
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADCs and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Set the ADC clock prescaler */
tmpADC_Common->CCR &= ~(ADC_CCR_ADCPRE);
tmpADC_Common->CCR |= hadc->Init.ClockPrescaler;
/* Set ADC scan mode */
hadc->Instance->CR1 &= ~(ADC_CR1_SCAN);
hadc->Instance->CR1 |= ADC_CR1_SCANCONV(hadc->Init.ScanConvMode);
/* Set ADC resolution */
hadc->Instance->CR1 &= ~(ADC_CR1_RES);
hadc->Instance->CR1 |= hadc->Init.Resolution;
/* Set ADC data alignment */
hadc->Instance->CR2 &= ~(ADC_CR2_ALIGN);
hadc->Instance->CR2 |= hadc->Init.DataAlign;
/* Enable external trigger if trigger selection is different of software */
/* start. */
/* Note: This configuration keeps the hardware feature of parameter */
/* ExternalTrigConvEdge "trigger edge none" equivalent to */
/* software start. */
if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
{
/* Select external trigger to start conversion */
hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
hadc->Instance->CR2 |= hadc->Init.ExternalTrigConv;
/* Select external trigger polarity */
hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
hadc->Instance->CR2 |= hadc->Init.ExternalTrigConvEdge;
}
else
{
/* Reset the external trigger */
hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
}
/* Enable or disable ADC continuous conversion mode */
hadc->Instance->CR2 &= ~(ADC_CR2_CONT);
hadc->Instance->CR2 |= ADC_CR2_CONTINUOUS(hadc->Init.ContinuousConvMode);
if(hadc->Init.DiscontinuousConvMode != DISABLE)
{
assert_param(IS_ADC_REGULAR_DISC_NUMBER(hadc->Init.NbrOfDiscConversion));
/* Enable the selected ADC regular discontinuous mode */
hadc->Instance->CR1 |= (uint32_t)ADC_CR1_DISCEN;
/* Set the number of channels to be converted in discontinuous mode */
hadc->Instance->CR1 &= ~(ADC_CR1_DISCNUM);
hadc->Instance->CR1 |= ADC_CR1_DISCONTINUOUS(hadc->Init.NbrOfDiscConversion);
}
else
{
/* Disable the selected ADC regular discontinuous mode */
hadc->Instance->CR1 &= ~(ADC_CR1_DISCEN);
}
/* Set ADC number of conversion */
hadc->Instance->SQR1 &= ~(ADC_SQR1_L);
hadc->Instance->SQR1 |= ADC_SQR1(hadc->Init.NbrOfConversion);
/* Enable or disable ADC DMA continuous request */
hadc->Instance->CR2 &= ~(ADC_CR2_DDS);
hadc->Instance->CR2 |= ADC_CR2_DMAContReq(hadc->Init.DMAContinuousRequests);
/* Enable or disable ADC end of conversion selection */
hadc->Instance->CR2 &= ~(ADC_CR2_EOCS);
hadc->Instance->CR2 |= ADC_CR2_EOCSelection(hadc->Init.EOCSelection);
}
/**
* @brief DMA transfer complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma)
{
/* Retrieve ADC handle corresponding to current DMA handle */
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Update state machine on conversion status if not in error state */
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA))
{
/* Update ADC state machine */
SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
/* Determine whether any further conversion upcoming on group regular */
/* by external trigger, continuous mode or scan sequence on going. */
/* Note: On STM32F4, there is no independent flag of end of sequence. */
/* The test of scan sequence on going is done either with scan */
/* sequence disabled or with end of conversion flag set to */
/* of end of sequence. */
if(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
(hadc->Init.ContinuousConvMode == DISABLE) &&
(HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) )
{
/* Disable ADC end of single conversion interrupt on group regular */
/* Note: Overrun interrupt was enabled with EOC interrupt in */
/* HAL_ADC_Start_IT(), but is not disabled here because can be used */
/* by overrun IRQ process below. */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
/* Set ADC state */
CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
{
SET_BIT(hadc->State, HAL_ADC_STATE_READY);
}
}
/* Conversion complete callback */
HAL_ADC_ConvCpltCallback(hadc);
}
else
{
/* Call DMA error callback */
hadc->DMA_Handle->XferErrorCallback(hdma);
}
}
/**
* @brief DMA half transfer complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma)
{
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Conversion complete callback */
HAL_ADC_ConvHalfCpltCallback(hadc);
}
/**
* @brief DMA error callback
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void ADC_DMAError(DMA_HandleTypeDef *hdma)
{
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
hadc->State= HAL_ADC_STATE_ERROR_DMA;
/* Set ADC error code to DMA error */
hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
HAL_ADC_ErrorCallback(hadc);
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_ADC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_adc_ex.c
* @author MCD Application Team
* @brief This file provides firmware functions to manage the following
* functionalities of the ADC extension peripheral:
* + Extended features functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
(##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
(##) ADC pins configuration
(+++) Enable the clock for the ADC GPIOs using the following function:
__HAL_RCC_GPIOx_CLK_ENABLE()
(+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
(##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
(+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
(+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
(+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
(##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
(+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
(+++) Configure and enable two DMA streams stream for managing data
transfer from peripheral to memory (output stream)
(+++) Associate the initialized DMA handle to the ADC DMA handle
using __HAL_LINKDMA()
(+++) Configure the priority and enable the NVIC for the transfer complete
interrupt on the two DMA Streams. The output stream should have higher
priority than the input stream.
(#) Configure the ADC Prescaler, conversion resolution and data alignment
using the HAL_ADC_Init() function.
(#) Configure the ADC Injected channels group features, use HAL_ADC_Init()
and HAL_ADC_ConfigChannel() functions.
(#) Three operation modes are available within this driver :
*** Polling mode IO operation ***
=================================
[..]
(+) Start the ADC peripheral using HAL_ADCEx_InjectedStart()
(+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
user can specify the value of timeout according to his end application
(+) To read the ADC converted values, use the HAL_ADCEx_InjectedGetValue() function.
(+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop()
*** Interrupt mode IO operation ***
===================================
[..]
(+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_IT()
(+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
(+) At ADC end of conversion HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
(+) In case of ADC Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
(+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_IT()
*** DMA mode IO operation ***
==============================
[..]
(+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_DMA(), at this stage the user specify the length
of data to be transferred at each end of conversion
(+) At The end of data transfer ba HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
(+) In case of transfer Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
(+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_DMA()
*** Multi mode ADCs Regular channels configuration ***
======================================================
[..]
(+) Select the Multi mode ADC regular channels features (dual or triple mode)
and configure the DMA mode using HAL_ADCEx_MultiModeConfigChannel() functions.
(+) Start the ADC peripheral using HAL_ADCEx_MultiModeStart_DMA(), at this stage the user specify the length
of data to be transferred at each end of conversion
(+) Read the ADCs converted values using the HAL_ADCEx_MultiModeGetValue() function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup ADCEx ADCEx
* @brief ADC Extended driver modules
* @{
*/
#ifdef HAL_ADC_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup ADCEx_Private_Functions
* @{
*/
/* Private function prototypes -----------------------------------------------*/
static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma);
static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma);
static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup ADCEx_Exported_Functions ADC Exported Functions
* @{
*/
/** @defgroup ADCEx_Exported_Functions_Group1 Extended features functions
* @brief Extended features functions
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Start conversion of injected channel.
(+) Stop conversion of injected channel.
(+) Start multimode and enable DMA transfer.
(+) Stop multimode and disable DMA transfer.
(+) Get result of injected channel conversion.
(+) Get result of multimode conversion.
(+) Configure injected channels.
(+) Configure multimode.
@endverbatim
* @{
*/
/**
* @brief Enables the selected ADC software start conversion of the injected channels.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc)
{
__IO uint32_t counter = 0U;
uint32_t tmp1 = 0U, tmp2 = 0U;
ADC_Common_TypeDef *tmpADC_Common;
/* Process locked */
__HAL_LOCK(hadc);
/* Enable the ADC peripheral */
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay for ADC stabilization time */
/* Compute number of CPU cycles to wait for */
counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
while(counter != 0U)
{
counter--;
}
}
/* Start conversion if ADC is effectively enabled */
if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Set ADC state */
/* - Clear state bitfield related to injected group conversion results */
/* - Set state bitfield related to injected operation */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC,
HAL_ADC_STATE_INJ_BUSY);
/* Check if a regular conversion is ongoing */
/* Note: On this device, there is no ADC error code fields related to */
/* conversions on group injected only. In case of conversion on */
/* going on group regular, no error code is reset. */
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
{
/* Reset ADC all error code fields */
ADC_CLEAR_ERRORCODE(hadc);
}
/* Process unlocked */
/* Unlock before starting ADC conversions: in case of potential */
/* interruption, to let the process to ADC IRQ Handler. */
__HAL_UNLOCK(hadc);
/* Clear injected group conversion flag */
/* (To ensure of no unknown state from potential previous ADC operations) */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Check if Multimode enabled */
if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI))
{
tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
if(tmp1 && tmp2)
{
/* Enable the selected ADC software conversion for injected group */
hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
}
}
else
{
tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
if((hadc->Instance == ADC1) && tmp1 && tmp2)
{
/* Enable the selected ADC software conversion for injected group */
hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
}
}
}
/* Return function status */
return HAL_OK;
}
/**
* @brief Enables the interrupt and starts ADC conversion of injected channels.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
*
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc)
{
__IO uint32_t counter = 0U;
uint32_t tmp1 = 0U, tmp2 = 0U;
ADC_Common_TypeDef *tmpADC_Common;
/* Process locked */
__HAL_LOCK(hadc);
/* Enable the ADC peripheral */
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay for ADC stabilization time */
/* Compute number of CPU cycles to wait for */
counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
while(counter != 0U)
{
counter--;
}
}
/* Start conversion if ADC is effectively enabled */
if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Set ADC state */
/* - Clear state bitfield related to injected group conversion results */
/* - Set state bitfield related to injected operation */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC,
HAL_ADC_STATE_INJ_BUSY);
/* Check if a regular conversion is ongoing */
/* Note: On this device, there is no ADC error code fields related to */
/* conversions on group injected only. In case of conversion on */
/* going on group regular, no error code is reset. */
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
{
/* Reset ADC all error code fields */
ADC_CLEAR_ERRORCODE(hadc);
}
/* Process unlocked */
/* Unlock before starting ADC conversions: in case of potential */
/* interruption, to let the process to ADC IRQ Handler. */
__HAL_UNLOCK(hadc);
/* Clear injected group conversion flag */
/* (To ensure of no unknown state from potential previous ADC operations) */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
/* Enable end of conversion interrupt for injected channels */
__HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC);
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Check if Multimode enabled */
if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI))
{
tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
if(tmp1 && tmp2)
{
/* Enable the selected ADC software conversion for injected group */
hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
}
}
else
{
tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
if((hadc->Instance == ADC1) && tmp1 && tmp2)
{
/* Enable the selected ADC software conversion for injected group */
hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
}
}
}
/* Return function status */
return HAL_OK;
}
/**
* @brief Stop conversion of injected channels. Disable ADC peripheral if
* no regular conversion is on going.
* @note If ADC must be disabled and if conversion is on going on
* regular group, function HAL_ADC_Stop must be used to stop both
* injected and regular groups, and disable the ADC.
* @note If injected group mode auto-injection is enabled,
* function HAL_ADC_Stop must be used.
* @note In case of auto-injection mode, HAL_ADC_Stop must be used.
* @param hadc ADC handle
* @retval None
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc)
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
/* Process locked */
__HAL_LOCK(hadc);
/* Stop potential conversion and disable ADC peripheral */
/* Conditioned to: */
/* - No conversion on the other group (regular group) is intended to */
/* continue (injected and regular groups stop conversion and ADC disable */
/* are common) */
/* - In case of auto-injection mode, HAL_ADC_Stop must be used. */
if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) &&
HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) )
{
/* Stop potential conversion on going, on regular and injected groups */
/* Disable ADC peripheral */
__HAL_ADC_DISABLE(hadc);
/* Check if ADC is effectively disabled */
if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Set ADC state */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
HAL_ADC_STATE_READY);
}
}
else
{
/* Update ADC state machine to error */
SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
tmp_hal_status = HAL_ERROR;
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return tmp_hal_status;
}
/**
* @brief Poll for injected conversion complete
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param Timeout Timeout value in millisecond.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
{
uint32_t tickstart = 0U;
/* Get tick */
tickstart = HAL_GetTick();
/* Check End of conversion flag */
while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)))
{
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
hadc->State= HAL_ADC_STATE_TIMEOUT;
/* Process unlocked */
__HAL_UNLOCK(hadc);
return HAL_TIMEOUT;
}
}
}
/* Clear injected group conversion flag */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JSTRT | ADC_FLAG_JEOC);
/* Update ADC state machine */
SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC);
/* Determine whether any further conversion upcoming on group injected */
/* by external trigger, continuous mode or scan sequence on going. */
/* Note: On STM32F4, there is no independent flag of end of sequence. */
/* The test of scan sequence on going is done either with scan */
/* sequence disabled or with end of conversion flag set to */
/* of end of sequence. */
if(ADC_IS_SOFTWARE_START_INJECTED(hadc) &&
(HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) ||
HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) &&
(HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) &&
(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
(hadc->Init.ContinuousConvMode == DISABLE) ) ) )
{
/* Set ADC state */
CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
{
SET_BIT(hadc->State, HAL_ADC_STATE_READY);
}
}
/* Return ADC state */
return HAL_OK;
}
/**
* @brief Stop conversion of injected channels, disable interruption of
* end-of-conversion. Disable ADC peripheral if no regular conversion
* is on going.
* @note If ADC must be disabled and if conversion is on going on
* regular group, function HAL_ADC_Stop must be used to stop both
* injected and regular groups, and disable the ADC.
* @note If injected group mode auto-injection is enabled,
* function HAL_ADC_Stop must be used.
* @param hadc ADC handle
* @retval None
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc)
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
/* Process locked */
__HAL_LOCK(hadc);
/* Stop potential conversion and disable ADC peripheral */
/* Conditioned to: */
/* - No conversion on the other group (regular group) is intended to */
/* continue (injected and regular groups stop conversion and ADC disable */
/* are common) */
/* - In case of auto-injection mode, HAL_ADC_Stop must be used. */
if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) &&
HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) )
{
/* Stop potential conversion on going, on regular and injected groups */
/* Disable ADC peripheral */
__HAL_ADC_DISABLE(hadc);
/* Check if ADC is effectively disabled */
if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Disable ADC end of conversion interrupt for injected channels */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
/* Set ADC state */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
HAL_ADC_STATE_READY);
}
}
else
{
/* Update ADC state machine to error */
SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
tmp_hal_status = HAL_ERROR;
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return tmp_hal_status;
}
/**
* @brief Gets the converted value from data register of injected channel.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param InjectedRank the ADC injected rank.
* This parameter can be one of the following values:
* @arg ADC_INJECTED_RANK_1: Injected Channel1 selected
* @arg ADC_INJECTED_RANK_2: Injected Channel2 selected
* @arg ADC_INJECTED_RANK_3: Injected Channel3 selected
* @arg ADC_INJECTED_RANK_4: Injected Channel4 selected
* @retval None
*/
uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank)
{
__IO uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_ADC_INJECTED_RANK(InjectedRank));
/* Clear injected group conversion flag to have similar behaviour as */
/* regular group: reading data register also clears end of conversion flag. */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
/* Return the selected ADC converted value */
switch(InjectedRank)
{
case ADC_INJECTED_RANK_4:
{
tmp = hadc->Instance->JDR4;
}
break;
case ADC_INJECTED_RANK_3:
{
tmp = hadc->Instance->JDR3;
}
break;
case ADC_INJECTED_RANK_2:
{
tmp = hadc->Instance->JDR2;
}
break;
case ADC_INJECTED_RANK_1:
{
tmp = hadc->Instance->JDR1;
}
break;
default:
break;
}
return tmp;
}
/**
* @brief Enables ADC DMA request after last transfer (Multi-ADC mode) and enables ADC peripheral
*
* @note Caution: This function must be used only with the ADC master.
*
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param pData Pointer to buffer in which transferred from ADC peripheral to memory will be stored.
* @param Length The length of data to be transferred from ADC peripheral to memory.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
{
__IO uint32_t counter = 0U;
ADC_Common_TypeDef *tmpADC_Common;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
/* Process locked */
__HAL_LOCK(hadc);
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay for temperature sensor stabilization time */
/* Compute number of CPU cycles to wait for */
counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
while(counter != 0U)
{
counter--;
}
}
/* Start conversion if ADC is effectively enabled */
if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Set ADC state */
/* - Clear state bitfield related to regular group conversion results */
/* - Set state bitfield related to regular group operation */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
HAL_ADC_STATE_REG_BUSY);
/* If conversions on group regular are also triggering group injected, */
/* update ADC state. */
if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
{
ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);
}
/* State machine update: Check if an injected conversion is ongoing */
if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
{
/* Reset ADC error code fields related to conversions on group regular */
CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));
}
else
{
/* Reset ADC all error code fields */
ADC_CLEAR_ERRORCODE(hadc);
}
/* Process unlocked */
/* Unlock before starting ADC conversions: in case of potential */
/* interruption, to let the process to ADC IRQ Handler. */
__HAL_UNLOCK(hadc);
/* Set the DMA transfer complete callback */
hadc->DMA_Handle->XferCpltCallback = ADC_MultiModeDMAConvCplt;
/* Set the DMA half transfer complete callback */
hadc->DMA_Handle->XferHalfCpltCallback = ADC_MultiModeDMAHalfConvCplt;
/* Set the DMA error callback */
hadc->DMA_Handle->XferErrorCallback = ADC_MultiModeDMAError ;
/* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */
/* start (in case of SW start): */
/* Clear regular group conversion flag and overrun flag */
/* (To ensure of no unknown state from potential previous ADC operations) */
__HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC);
/* Enable ADC overrun interrupt */
__HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
if (hadc->Init.DMAContinuousRequests != DISABLE)
{
/* Enable the selected ADC DMA request after last transfer */
tmpADC_Common->CCR |= ADC_CCR_DDS;
}
else
{
/* Disable the selected ADC EOC rising on each regular channel conversion */
tmpADC_Common->CCR &= ~ADC_CCR_DDS;
}
/* Enable the DMA Stream */
HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&tmpADC_Common->CDR, (uint32_t)pData, Length);
/* if no external trigger present enable software conversion of regular channels */
if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
{
/* Enable the selected ADC software conversion for regular group */
hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
}
}
/* Return function status */
return HAL_OK;
}
/**
* @brief Disables ADC DMA (multi-ADC mode) and disables ADC peripheral
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc)
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
ADC_Common_TypeDef *tmpADC_Common;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
/* Process locked */
__HAL_LOCK(hadc);
/* Stop potential conversion on going, on regular and injected groups */
/* Disable ADC peripheral */
__HAL_ADC_DISABLE(hadc);
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Check if ADC is effectively disabled */
if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
{
/* Disable the selected ADC DMA mode for multimode */
tmpADC_Common->CCR &= ~ADC_CCR_DDS;
/* Disable the DMA channel (in case of DMA in circular mode or stop while */
/* DMA transfer is on going) */
tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);
/* Disable ADC overrun interrupt */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
/* Set ADC state */
ADC_STATE_CLR_SET(hadc->State,
HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
HAL_ADC_STATE_READY);
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return tmp_hal_status;
}
/**
* @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results
* data in the selected multi mode.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval The converted data value.
*/
uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc)
{
ADC_Common_TypeDef *tmpADC_Common;
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Return the multi mode conversion value */
return tmpADC_Common->CDR;
}
/**
* @brief Injected conversion complete callback in non blocking mode
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hadc);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_ADC_InjectedConvCpltCallback could be implemented in the user file
*/
}
/**
* @brief Configures for the selected ADC injected channel its corresponding
* rank in the sequencer and its sample time.
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param sConfigInjected ADC configuration structure for injected channel.
* @retval None
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected)
{
#ifdef USE_FULL_ASSERT
uint32_t tmp = 0U;
#endif /* USE_FULL_ASSERT */
ADC_Common_TypeDef *tmpADC_Common;
/* Check the parameters */
assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel));
assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
assert_param(IS_ADC_EXT_INJEC_TRIG(sConfigInjected->ExternalTrigInjecConv));
assert_param(IS_ADC_INJECTED_LENGTH(sConfigInjected->InjectedNbrOfConversion));
assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
#ifdef USE_FULL_ASSERT
tmp = ADC_GET_RESOLUTION(hadc);
assert_param(IS_ADC_RANGE(tmp, sConfigInjected->InjectedOffset));
#endif /* USE_FULL_ASSERT */
if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
{
assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
}
/* Process locked */
__HAL_LOCK(hadc);
/* if ADC_Channel_10 ... ADC_Channel_18 is selected */
if (sConfigInjected->InjectedChannel > ADC_CHANNEL_9)
{
/* Clear the old sample time */
hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel);
/* Set the new sample time */
hadc->Instance->SMPR1 |= ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
}
else /* ADC_Channel include in ADC_Channel_[0..9] */
{
/* Clear the old sample time */
hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel);
/* Set the new sample time */
hadc->Instance->SMPR2 |= ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
}
/*---------------------------- ADCx JSQR Configuration -----------------*/
hadc->Instance->JSQR &= ~(ADC_JSQR_JL);
hadc->Instance->JSQR |= ADC_SQR1(sConfigInjected->InjectedNbrOfConversion);
/* Rank configuration */
/* Clear the old SQx bits for the selected rank */
hadc->Instance->JSQR &= ~ADC_JSQR(ADC_JSQR_JSQ1, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
/* Set the SQx bits for the selected rank */
hadc->Instance->JSQR |= ADC_JSQR(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
/* Enable external trigger if trigger selection is different of software */
/* start. */
/* Note: This configuration keeps the hardware feature of parameter */
/* ExternalTrigConvEdge "trigger edge none" equivalent to */
/* software start. */
if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
{
/* Select external trigger to start conversion */
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConv;
/* Select external trigger polarity */
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConvEdge;
}
else
{
/* Reset the external trigger */
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
}
if (sConfigInjected->AutoInjectedConv != DISABLE)
{
/* Enable the selected ADC automatic injected group conversion */
hadc->Instance->CR1 |= ADC_CR1_JAUTO;
}
else
{
/* Disable the selected ADC automatic injected group conversion */
hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO);
}
if (sConfigInjected->InjectedDiscontinuousConvMode != DISABLE)
{
/* Enable the selected ADC injected discontinuous mode */
hadc->Instance->CR1 |= ADC_CR1_JDISCEN;
}
else
{
/* Disable the selected ADC injected discontinuous mode */
hadc->Instance->CR1 &= ~(ADC_CR1_JDISCEN);
}
switch(sConfigInjected->InjectedRank)
{
case 1U:
/* Set injected channel 1 offset */
hadc->Instance->JOFR1 &= ~(ADC_JOFR1_JOFFSET1);
hadc->Instance->JOFR1 |= sConfigInjected->InjectedOffset;
break;
case 2U:
/* Set injected channel 2 offset */
hadc->Instance->JOFR2 &= ~(ADC_JOFR2_JOFFSET2);
hadc->Instance->JOFR2 |= sConfigInjected->InjectedOffset;
break;
case 3U:
/* Set injected channel 3 offset */
hadc->Instance->JOFR3 &= ~(ADC_JOFR3_JOFFSET3);
hadc->Instance->JOFR3 |= sConfigInjected->InjectedOffset;
break;
default:
/* Set injected channel 4 offset */
hadc->Instance->JOFR4 &= ~(ADC_JOFR4_JOFFSET4);
hadc->Instance->JOFR4 |= sConfigInjected->InjectedOffset;
break;
}
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* if ADC1 Channel_18 is selected enable VBAT Channel */
if ((hadc->Instance == ADC1) && (sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT))
{
/* Enable the VBAT channel*/
tmpADC_Common->CCR |= ADC_CCR_VBATE;
}
/* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
if ((hadc->Instance == ADC1) && ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)))
{
/* Enable the TSVREFE channel*/
tmpADC_Common->CCR |= ADC_CCR_TSVREFE;
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Configures the ADC multi-mode
* @param hadc pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param multimode pointer to an ADC_MultiModeTypeDef structure that contains
* the configuration information for multimode.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode)
{
ADC_Common_TypeDef *tmpADC_Common;
/* Check the parameters */
assert_param(IS_ADC_MODE(multimode->Mode));
assert_param(IS_ADC_DMA_ACCESS_MODE(multimode->DMAAccessMode));
assert_param(IS_ADC_SAMPLING_DELAY(multimode->TwoSamplingDelay));
/* Process locked */
__HAL_LOCK(hadc);
/* Pointer to the common control register to which is belonging hadc */
/* (Depending on STM32F4 product, there may be up to 3 ADC and 1 common */
/* control register) */
tmpADC_Common = ADC_COMMON_REGISTER(hadc);
/* Set ADC mode */
tmpADC_Common->CCR &= ~(ADC_CCR_MULTI);
tmpADC_Common->CCR |= multimode->Mode;
/* Set the ADC DMA access mode */
tmpADC_Common->CCR &= ~(ADC_CCR_DMA);
tmpADC_Common->CCR |= multimode->DMAAccessMode;
/* Set delay between two sampling phases */
tmpADC_Common->CCR &= ~(ADC_CCR_DELAY);
tmpADC_Common->CCR |= multimode->TwoSamplingDelay;
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/**
* @brief DMA transfer complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma)
{
/* Retrieve ADC handle corresponding to current DMA handle */
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Update state machine on conversion status if not in error state */
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA))
{
/* Update ADC state machine */
SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
/* Determine whether any further conversion upcoming on group regular */
/* by external trigger, continuous mode or scan sequence on going. */
/* Note: On STM32F4, there is no independent flag of end of sequence. */
/* The test of scan sequence on going is done either with scan */
/* sequence disabled or with end of conversion flag set to */
/* of end of sequence. */
if(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
(hadc->Init.ContinuousConvMode == DISABLE) &&
(HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) )
{
/* Disable ADC end of single conversion interrupt on group regular */
/* Note: Overrun interrupt was enabled with EOC interrupt in */
/* HAL_ADC_Start_IT(), but is not disabled here because can be used */
/* by overrun IRQ process below. */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
/* Set ADC state */
CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
{
SET_BIT(hadc->State, HAL_ADC_STATE_READY);
}
}
/* Conversion complete callback */
HAL_ADC_ConvCpltCallback(hadc);
}
else
{
/* Call DMA error callback */
hadc->DMA_Handle->XferErrorCallback(hdma);
}
}
/**
* @brief DMA half transfer complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma)
{
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Conversion complete callback */
HAL_ADC_ConvHalfCpltCallback(hadc);
}
/**
* @brief DMA error callback
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma)
{
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
hadc->State= HAL_ADC_STATE_ERROR_DMA;
/* Set ADC error code to DMA error */
hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
HAL_ADC_ErrorCallback(hadc);
}
/**
* @}
*/
#endif /* HAL_ADC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_can.c
* @author MCD Application Team
* @brief This file provides firmware functions to manage the following
* functionalities of the Controller Area Network (CAN) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
* + Peripheral Control functions
* + Peripheral State and Error functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#) Enable the CAN controller interface clock using
__HAL_RCC_CAN1_CLK_ENABLE() for CAN1, __HAL_RCC_CAN2_CLK_ENABLE() for CAN2
and __HAL_RCC_CAN3_CLK_ENABLE() for CAN3
-@- In case you are using CAN2 only, you have to enable the CAN1 clock.
(#) CAN pins configuration
(++) Enable the clock for the CAN GPIOs using the following function:
__GPIOx_CLK_ENABLE()
(++) Connect and configure the involved CAN pins to AF9 using the
following function HAL_GPIO_Init()
(#) Initialize and configure the CAN using CAN_Init() function.
(#) Transmit the desired CAN frame using HAL_CAN_Transmit() function.
(#) Or transmit the desired CAN frame using HAL_CAN_Transmit_IT() function.
(#) Receive a CAN frame using HAL_CAN_Receive() function.
(#) Or receive a CAN frame using HAL_CAN_Receive_IT() function.
*** Polling mode IO operation ***
=================================
[..]
(+) Start the CAN peripheral transmission and wait the end of this operation
using HAL_CAN_Transmit(), at this stage user can specify the value of timeout
according to his end application
(+) Start the CAN peripheral reception and wait the end of this operation
using HAL_CAN_Receive(), at this stage user can specify the value of timeout
according to his end application
*** Interrupt mode IO operation ***
===================================
[..]
(+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT()
(+) Start the CAN peripheral reception using HAL_CAN_Receive_IT()
(+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine
(+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can
add his own code by customization of function pointer HAL_CAN_TxCpltCallback
(+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can
add his own code by customization of function pointer HAL_CAN_ErrorCallback
*** CAN HAL driver macros list ***
=============================================
[..]
Below the list of most used macros in CAN HAL driver.
(+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts
(+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts
(+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled
(+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags
(+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status
[..]
(@) You can refer to the CAN HAL driver header file for more useful macros
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup CAN CAN
* @brief CAN driver modules
* @{
*/
#ifdef HAL_CAN_MODULE_ENABLED
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup CAN_Private_Constants
* @{
*/
#define CAN_TIMEOUT_VALUE 10U
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup CAN_Private_Functions
* @{
*/
static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber);
static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CAN_Exported_Functions CAN Exported Functions
* @{
*/
/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### Initialization and de-initialization functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Initialize and configure the CAN.
(+) De-initialize the CAN.
@endverbatim
* @{
*/
/**
* @brief Initializes the CAN peripheral according to the specified
* parameters in the CAN_InitStruct.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan)
{
uint32_t InitStatus = CAN_INITSTATUS_FAILED;
uint32_t tickstart = 0U;
/* Check CAN handle */
if(hcan == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM));
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM));
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM));
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART));
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM));
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP));
assert_param(IS_CAN_MODE(hcan->Init.Mode));
assert_param(IS_CAN_SJW(hcan->Init.SJW));
assert_param(IS_CAN_BS1(hcan->Init.BS1));
assert_param(IS_CAN_BS2(hcan->Init.BS2));
assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler));
if(hcan->State == HAL_CAN_STATE_RESET)
{
/* Allocate lock resource and initialize it */
hcan->Lock = HAL_UNLOCKED;
/* Init the low level hardware */
HAL_CAN_MspInit(hcan);
}
/* Initialize the CAN state*/
hcan->State = HAL_CAN_STATE_BUSY;
/* Exit from sleep mode */
hcan->Instance->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
/* Request initialisation */
hcan->Instance->MCR |= CAN_MCR_INRQ ;
/* Get tick */
tickstart = HAL_GetTick();
/* Wait the acknowledge */
while((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
{
if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
{
hcan->State= HAL_CAN_STATE_TIMEOUT;
/* Process unlocked */
__HAL_UNLOCK(hcan);
return HAL_TIMEOUT;
}
}
/* Check acknowledge */
if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
{
/* Set the time triggered communication mode */
if (hcan->Init.TTCM == ENABLE)
{
hcan->Instance->MCR |= CAN_MCR_TTCM;
}
else
{
hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TTCM;
}
/* Set the automatic bus-off management */
if (hcan->Init.ABOM == ENABLE)
{
hcan->Instance->MCR |= CAN_MCR_ABOM;
}
else
{
hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_ABOM;
}
/* Set the automatic wake-up mode */
if (hcan->Init.AWUM == ENABLE)
{
hcan->Instance->MCR |= CAN_MCR_AWUM;
}
else
{
hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_AWUM;
}
/* Set the no automatic retransmission */
if (hcan->Init.NART == ENABLE)
{
hcan->Instance->MCR |= CAN_MCR_NART;
}
else
{
hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_NART;
}
/* Set the receive FIFO locked mode */
if (hcan->Init.RFLM == ENABLE)
{
hcan->Instance->MCR |= CAN_MCR_RFLM;
}
else
{
hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_RFLM;
}
/* Set the transmit FIFO priority */
if (hcan->Init.TXFP == ENABLE)
{
hcan->Instance->MCR |= CAN_MCR_TXFP;
}
else
{
hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TXFP;
}
/* Set the bit timing register */
hcan->Instance->BTR = (uint32_t)((uint32_t)hcan->Init.Mode) | \
((uint32_t)hcan->Init.SJW) | \
((uint32_t)hcan->Init.BS1) | \
((uint32_t)hcan->Init.BS2) | \
((uint32_t)hcan->Init.Prescaler - 1U);
/* Request leave initialisation */
hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_INRQ;
/* Get tick */
tickstart = HAL_GetTick();
/* Wait the acknowledge */
while((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
{
if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
{
hcan->State= HAL_CAN_STATE_TIMEOUT;
/* Process unlocked */
__HAL_UNLOCK(hcan);
return HAL_TIMEOUT;
}
}
/* Check acknowledged */
if ((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
{
InitStatus = CAN_INITSTATUS_SUCCESS;
}
}
if(InitStatus == CAN_INITSTATUS_SUCCESS)
{
/* Set CAN error code to none */
hcan->ErrorCode = HAL_CAN_ERROR_NONE;
/* Initialize the CAN state */
hcan->State = HAL_CAN_STATE_READY;
/* Return function status */
return HAL_OK;
}
else
{
/* Initialize the CAN state */
hcan->State = HAL_CAN_STATE_ERROR;
/* Return function status */
return HAL_ERROR;
}
}
/**
* @brief Configures the CAN reception filter according to the specified
* parameters in the CAN_FilterInitStruct.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @param sFilterConfig pointer to a CAN_FilterConfTypeDef structure that
* contains the filter configuration information.
* @retval None
*/
HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig)
{
uint32_t filternbrbitpos = 0U;
CAN_TypeDef *can_ip;
/* Prevent unused argument(s) compilation warning */
UNUSED(hcan);
/* Check the parameters */
assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber));
assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode));
assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale));
assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment));
assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation));
assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber));
filternbrbitpos = 1U << sFilterConfig->FilterNumber;
#if defined (CAN3)
/* Check the CAN instance */
if(hcan->Instance == CAN3)
{
can_ip = CAN3;
}
else
{
can_ip = CAN1;
}
#else
can_ip = CAN1;
#endif
/* Initialisation mode for the filter */
can_ip->FMR |= (uint32_t)CAN_FMR_FINIT;
#if defined (CAN2)
/* Select the start slave bank */
can_ip->FMR &= ~((uint32_t)CAN_FMR_CAN2SB);
can_ip->FMR |= (uint32_t)(sFilterConfig->BankNumber << 8U);
#endif
/* Filter Deactivation */
can_ip->FA1R &= ~(uint32_t)filternbrbitpos;
/* Filter Scale */
if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT)
{
/* 16-bit scale for the filter */
can_ip->FS1R &= ~(uint32_t)filternbrbitpos;
/* First 16-bit identifier and First 16-bit mask */
/* Or First 16-bit identifier and Second 16-bit identifier */
can_ip->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16U) |
(0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdLow);
/* Second 16-bit identifier and Second 16-bit mask */
/* Or Third 16-bit identifier and Fourth 16-bit identifier */
can_ip->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16U) |
(0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdHigh);
}
if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT)
{
/* 32-bit scale for the filter */
can_ip->FS1R |= filternbrbitpos;
/* 32-bit identifier or First 32-bit identifier */
can_ip->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
((0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdHigh) << 16U) |
(0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdLow);
/* 32-bit mask or Second 32-bit identifier */
can_ip->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16U) |
(0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdLow);
}
/* Filter Mode */
if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK)
{
/*Id/Mask mode for the filter*/
can_ip->FM1R &= ~(uint32_t)filternbrbitpos;
}
else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
{
/*Identifier list mode for the filter*/
can_ip->FM1R |= (uint32_t)filternbrbitpos;
}
/* Filter FIFO assignment */
if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0)
{
/* FIFO 0 assignation for the filter */
can_ip->FFA1R &= ~(uint32_t)filternbrbitpos;
}
if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO1)
{
/* FIFO 1 assignation for the filter */
can_ip->FFA1R |= (uint32_t)filternbrbitpos;
}
/* Filter activation */
if (sFilterConfig->FilterActivation == ENABLE)
{
can_ip->FA1R |= filternbrbitpos;
}
/* Leave the initialisation mode for the filter */
can_ip->FMR &= ~((uint32_t)CAN_FMR_FINIT);
/* Return function status */
return HAL_OK;
}
/**
* @brief Deinitializes the CANx peripheral registers to their default reset values.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan)
{
/* Check CAN handle */
if(hcan == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
/* Change CAN state */
hcan->State = HAL_CAN_STATE_BUSY;
/* DeInit the low level hardware */
HAL_CAN_MspDeInit(hcan);
/* Change CAN state */
hcan->State = HAL_CAN_STATE_RESET;
/* Release Lock */
__HAL_UNLOCK(hcan);
/* Return function status */
return HAL_OK;
}
/**
* @brief Initializes the CAN MSP.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval None
*/
__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcan);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_CAN_MspInit could be implemented in the user file
*/
}
/**
* @brief DeInitializes the CAN MSP.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval None
*/
__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcan);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_CAN_MspDeInit could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup CAN_Exported_Functions_Group2 IO operation functions
* @brief IO operation functions
*
@verbatim
==============================================================================
##### IO operation functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Transmit a CAN frame message.
(+) Receive a CAN frame message.
(+) Enter CAN peripheral in sleep mode.
(+) Wake up the CAN peripheral from sleep mode.
@endverbatim
* @{
*/
/**
* @brief Initiates and transmits a CAN frame message.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @param Timeout Specify Timeout value
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
{
uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
uint32_t tickstart = 0U;
/* Check the parameters */
assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
if(((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) || \
((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) || \
((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2))
{
/* Process locked */
__HAL_LOCK(hcan);
/* Change CAN state */
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_RX0):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
break;
case(HAL_CAN_STATE_BUSY_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
break;
case(HAL_CAN_STATE_BUSY_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
break;
default: /* HAL_CAN_STATE_READY */
hcan->State = HAL_CAN_STATE_BUSY_TX;
break;
}
/* Select one empty transmit mailbox */
if ((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
{
transmitmailbox = CAN_TXMAILBOX_0;
}
else if ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
{
transmitmailbox = CAN_TXMAILBOX_1;
}
else
{
transmitmailbox = CAN_TXMAILBOX_2;
}
/* Set up the Id */
hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
if (hcan->pTxMsg->IDE == CAN_ID_STD)
{
assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21U) | \
hcan->pTxMsg->RTR);
}
else
{
assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3U) | \
hcan->pTxMsg->IDE | \
hcan->pTxMsg->RTR);
}
/* Set up the DLC */
hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0U;
hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
/* Set up the data field */
hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3U] << 24U) |
((uint32_t)hcan->pTxMsg->Data[2U] << 16U) |
((uint32_t)hcan->pTxMsg->Data[1U] << 8U) |
((uint32_t)hcan->pTxMsg->Data[0U]));
hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7U] << 24U) |
((uint32_t)hcan->pTxMsg->Data[6U] << 16U) |
((uint32_t)hcan->pTxMsg->Data[5U] << 8U) |
((uint32_t)hcan->pTxMsg->Data[4U]));
/* Request transmission */
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
/* Get tick */
tickstart = HAL_GetTick();
/* Check End of transmission flag */
while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox)))
{
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
hcan->State = HAL_CAN_STATE_TIMEOUT;
__HAL_CAN_CANCEL_TRANSMIT(hcan, transmitmailbox);
/* Process unlocked */
__HAL_UNLOCK(hcan);
return HAL_TIMEOUT;
}
}
}
/* Change CAN state */
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX_RX0):
hcan->State = HAL_CAN_STATE_BUSY_RX0;
break;
case(HAL_CAN_STATE_BUSY_TX_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX1;
break;
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
break;
default: /* HAL_CAN_STATE_BUSY_TX */
hcan->State = HAL_CAN_STATE_READY;
break;
}
/* Process unlocked */
__HAL_UNLOCK(hcan);
/* Return function status */
return HAL_OK;
}
else
{
/* Change CAN state */
hcan->State = HAL_CAN_STATE_ERROR;
/* Return function status */
return HAL_ERROR;
}
}
/**
* @brief Initiates and transmits a CAN frame message.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
{
uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
/* Check the parameters */
assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
if(((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) || \
((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) || \
((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2))
{
/* Process Locked */
__HAL_LOCK(hcan);
/* Select one empty transmit mailbox */
if((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
{
transmitmailbox = CAN_TXMAILBOX_0;
}
else if((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
{
transmitmailbox = CAN_TXMAILBOX_1;
}
else
{
transmitmailbox = CAN_TXMAILBOX_2;
}
/* Set up the Id */
hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
if(hcan->pTxMsg->IDE == CAN_ID_STD)
{
assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21U) | \
hcan->pTxMsg->RTR);
}
else
{
assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3U) | \
hcan->pTxMsg->IDE | \
hcan->pTxMsg->RTR);
}
/* Set up the DLC */
hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0U;
hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
/* Set up the data field */
hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3U] << 24U) |
((uint32_t)hcan->pTxMsg->Data[2U] << 16U) |
((uint32_t)hcan->pTxMsg->Data[1U] << 8U) |
((uint32_t)hcan->pTxMsg->Data[0U]));
hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7U] << 24U) |
((uint32_t)hcan->pTxMsg->Data[6U] << 16U) |
((uint32_t)hcan->pTxMsg->Data[5U] << 8U) |
((uint32_t)hcan->pTxMsg->Data[4U]));
/* Change CAN state */
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_RX0):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
break;
case(HAL_CAN_STATE_BUSY_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
break;
case(HAL_CAN_STATE_BUSY_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
break;
default: /* HAL_CAN_STATE_READY */
hcan->State = HAL_CAN_STATE_BUSY_TX;
break;
}
/* Set CAN error code to none */
hcan->ErrorCode = HAL_CAN_ERROR_NONE;
/* Process Unlocked */
__HAL_UNLOCK(hcan);
/* Request transmission */
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
/* Enable Error warning, Error passive, Bus-off,
Last error and Error Interrupts */
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG |
CAN_IT_EPV |
CAN_IT_BOF |
CAN_IT_LEC |
CAN_IT_ERR |
CAN_IT_TME);
}
else
{
/* Change CAN state */
hcan->State = HAL_CAN_STATE_ERROR;
/* Return function status */
return HAL_ERROR;
}
return HAL_OK;
}
/**
* @brief Receives a correct CAN frame.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @param FIFONumber FIFO Number value
* @param Timeout Specify Timeout value
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout)
{
uint32_t tickstart = 0U;
CanRxMsgTypeDef* pRxMsg = NULL;
/* Check the parameters */
assert_param(IS_CAN_FIFO(FIFONumber));
/* Check if CAN state is not busy for RX FIFO0 */
if ((FIFONumber == CAN_FIFO0) && ((hcan->State == HAL_CAN_STATE_BUSY_RX0) || \
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0) || \
(hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
{
return HAL_BUSY;
}
/* Check if CAN state is not busy for RX FIFO1 */
if ((FIFONumber == CAN_FIFO1) && ((hcan->State == HAL_CAN_STATE_BUSY_RX1) || \
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX1) || \
(hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
{
return HAL_BUSY;
}
/* Process locked */
__HAL_LOCK(hcan);
/* Change CAN state */
if (FIFONumber == CAN_FIFO0)
{
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
break;
case(HAL_CAN_STATE_BUSY_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
break;
case(HAL_CAN_STATE_BUSY_TX_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
break;
default: /* HAL_CAN_STATE_READY */
hcan->State = HAL_CAN_STATE_BUSY_RX0;
break;
}
}
else /* FIFONumber == CAN_FIFO1 */
{
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
break;
case(HAL_CAN_STATE_BUSY_RX0):
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
break;
case(HAL_CAN_STATE_BUSY_TX_RX0):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
break;
default: /* HAL_CAN_STATE_READY */
hcan->State = HAL_CAN_STATE_BUSY_RX1;
break;
}
}
/* Get tick */
tickstart = HAL_GetTick();
/* Check pending message */
while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0U)
{
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
hcan->State = HAL_CAN_STATE_TIMEOUT;
/* Process unlocked */
__HAL_UNLOCK(hcan);
return HAL_TIMEOUT;
}
}
}
/* Set RxMsg pointer */
if(FIFONumber == CAN_FIFO0)
{
pRxMsg = hcan->pRxMsg;
}
else /* FIFONumber == CAN_FIFO1 */
{
pRxMsg = hcan->pRx1Msg;
}
/* Get the Id */
pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
if (pRxMsg->IDE == CAN_ID_STD)
{
pRxMsg->StdId = 0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U);
}
else
{
pRxMsg->ExtId = 0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U);
}
pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
/* Get the DLC */
pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
/* Get the FMI */
pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U);
/* Get the FIFONumber */
pRxMsg->FIFONumber = FIFONumber;
/* Get the data field */
pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U);
pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U);
pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U);
pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U);
pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U);
pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U);
/* Release the FIFO */
if(FIFONumber == CAN_FIFO0)
{
/* Release FIFO0 */
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
}
else /* FIFONumber == CAN_FIFO1 */
{
/* Release FIFO1 */
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
}
/* Change CAN state */
if (FIFONumber == CAN_FIFO0)
{
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX_RX0):
hcan->State = HAL_CAN_STATE_BUSY_TX;
break;
case(HAL_CAN_STATE_BUSY_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX1;
break;
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
break;
default: /* HAL_CAN_STATE_BUSY_RX0 */
hcan->State = HAL_CAN_STATE_READY;
break;
}
}
else /* FIFONumber == CAN_FIFO1 */
{
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX;
break;
case(HAL_CAN_STATE_BUSY_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX0;
break;
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
break;
default: /* HAL_CAN_STATE_BUSY_RX1 */
hcan->State = HAL_CAN_STATE_READY;
break;
}
}
/* Process unlocked */
__HAL_UNLOCK(hcan);
/* Return function status */
return HAL_OK;
}
/**
* @brief Receives a correct CAN frame.
* @param hcan Pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @param FIFONumber Specify the FIFO number
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
{
/* Check the parameters */
assert_param(IS_CAN_FIFO(FIFONumber));
/* Check if CAN state is not busy for RX FIFO0 */
if((FIFONumber == CAN_FIFO0) && ((hcan->State == HAL_CAN_STATE_BUSY_RX0) || \
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0) || \
(hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
{
return HAL_BUSY;
}
/* Check if CAN state is not busy for RX FIFO1 */
if((FIFONumber == CAN_FIFO1) && ((hcan->State == HAL_CAN_STATE_BUSY_RX1) || \
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX1) || \
(hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
{
return HAL_BUSY;
}
/* Process locked */
__HAL_LOCK(hcan);
/* Change CAN state */
if(FIFONumber == CAN_FIFO0)
{
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
break;
case(HAL_CAN_STATE_BUSY_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
break;
case(HAL_CAN_STATE_BUSY_TX_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
break;
default: /* HAL_CAN_STATE_READY */
hcan->State = HAL_CAN_STATE_BUSY_RX0;
break;
}
}
else /* FIFONumber == CAN_FIFO1 */
{
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
break;
case(HAL_CAN_STATE_BUSY_RX0):
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
break;
case(HAL_CAN_STATE_BUSY_TX_RX0):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
break;
default: /* HAL_CAN_STATE_READY */
hcan->State = HAL_CAN_STATE_BUSY_RX1;
break;
}
}
/* Set CAN error code to none */
hcan->ErrorCode = HAL_CAN_ERROR_NONE;
/* Enable interrupts: */
/* - Enable Error warning Interrupt */
/* - Enable Error passive Interrupt */
/* - Enable Bus-off Interrupt */
/* - Enable Last error code Interrupt */
/* - Enable Error Interrupt */
/* - Enable Transmit mailbox empty Interrupt */
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG |
CAN_IT_EPV |
CAN_IT_BOF |
CAN_IT_LEC |
CAN_IT_ERR |
CAN_IT_TME);
/* Process unlocked */
__HAL_UNLOCK(hcan);
if(FIFONumber == CAN_FIFO0)
{
/* Enable FIFO 0 overrun and message pending Interrupt */
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_FOV0 | CAN_IT_FMP0);
}
else
{
/* Enable FIFO 1 overrun and message pending Interrupt */
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_FOV1 | CAN_IT_FMP1);
}
/* Return function status */
return HAL_OK;
}
/**
* @brief Enters the Sleep (low power) mode.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan)
{
uint32_t tickstart = 0U;
/* Process locked */
__HAL_LOCK(hcan);
/* Change CAN state */
hcan->State = HAL_CAN_STATE_BUSY;
/* Request Sleep mode */
hcan->Instance->MCR = (((hcan->Instance->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
/* Sleep mode status */
if ((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
{
/* Process unlocked */
__HAL_UNLOCK(hcan);
/* Return function status */
return HAL_ERROR;
}
/* Get tick */
tickstart = HAL_GetTick();
/* Wait the acknowledge */
while((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
{
if((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE)
{
hcan->State = HAL_CAN_STATE_TIMEOUT;
/* Process unlocked */
__HAL_UNLOCK(hcan);
return HAL_TIMEOUT;
}
}
/* Change CAN state */
hcan->State = HAL_CAN_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hcan);
/* Return function status */
return HAL_OK;
}
/**
* @brief Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral
* is in the normal mode.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan)
{
uint32_t tickstart = 0U;
/* Process locked */
__HAL_LOCK(hcan);
/* Change CAN state */
hcan->State = HAL_CAN_STATE_BUSY;
/* Wake up request */
hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
/* Get tick */
tickstart = HAL_GetTick();
/* Sleep mode status */
while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
{
if((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE)
{
hcan->State= HAL_CAN_STATE_TIMEOUT;
/* Process unlocked */
__HAL_UNLOCK(hcan);
return HAL_TIMEOUT;
}
}
if((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
{
/* Process unlocked */
__HAL_UNLOCK(hcan);
/* Return function status */
return HAL_ERROR;
}
/* Change CAN state */
hcan->State = HAL_CAN_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hcan);
/* Return function status */
return HAL_OK;
}
/**
* @brief Handles CAN interrupt request
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval None
*/
void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
{
uint32_t tmp1 = 0U, tmp2 = 0U, tmp3 = 0U;
uint32_t errorcode = HAL_CAN_ERROR_NONE;
/* Check Overrun flag for FIFO0 */
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_FOV0);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FOV0);
if(tmp1 && tmp2)
{
/* Set CAN error code to FOV0 error */
errorcode |= HAL_CAN_ERROR_FOV0;
/* Clear FIFO0 Overrun Flag */
__HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_FOV0);
}
/* Check Overrun flag for FIFO1 */
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_FOV1);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FOV1);
if(tmp1 && tmp2)
{
/* Set CAN error code to FOV1 error */
errorcode |= HAL_CAN_ERROR_FOV1;
/* Clear FIFO1 Overrun Flag */
__HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_FOV1);
}
/* Check End of transmission flag */
if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME))
{
tmp1 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0);
tmp2 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1);
tmp3 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2);
if(tmp1 || tmp2 || tmp3)
{
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK0);
tmp2 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK1);
tmp3 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK2);
/* Check Transmit success */
if(tmp1 || tmp2 || tmp3)
{
/* Call transmit function */
CAN_Transmit_IT(hcan);
}
else /* Transmit failure */
{
/* Set CAN error code to TXFAIL error */
errorcode |= HAL_CAN_ERROR_TXFAIL;
}
/* Clear transmission status flags (RQCPx and TXOKx) */
SET_BIT(hcan->Instance->TSR, CAN_TSR_RQCP0 | CAN_TSR_RQCP1 | CAN_TSR_RQCP2 | \
CAN_FLAG_TXOK0 | CAN_FLAG_TXOK1 | CAN_FLAG_TXOK2);
}
}
tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0);
/* Check End of reception flag for FIFO0 */
if((tmp1 != 0U) && tmp2)
{
/* Call receive function */
CAN_Receive_IT(hcan, CAN_FIFO0);
}
tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1);
/* Check End of reception flag for FIFO1 */
if((tmp1 != 0U) && tmp2)
{
/* Call receive function */
CAN_Receive_IT(hcan, CAN_FIFO1);
}
/* Set error code in handle */
hcan->ErrorCode |= errorcode;
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG);
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
/* Check Error Warning Flag */
if(tmp1 && tmp2 && tmp3)
{
/* Set CAN error code to EWG error */
hcan->ErrorCode |= HAL_CAN_ERROR_EWG;
}
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV);
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
/* Check Error Passive Flag */
if(tmp1 && tmp2 && tmp3)
{
/* Set CAN error code to EPV error */
hcan->ErrorCode |= HAL_CAN_ERROR_EPV;
}
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF);
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
/* Check Bus-Off Flag */
if(tmp1 && tmp2 && tmp3)
{
/* Set CAN error code to BOF error */
hcan->ErrorCode |= HAL_CAN_ERROR_BOF;
}
tmp1 = HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC);
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC);
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
/* Check Last error code Flag */
if((!tmp1) && tmp2 && tmp3)
{
tmp1 = (hcan->Instance->ESR) & CAN_ESR_LEC;
switch(tmp1)
{
case(CAN_ESR_LEC_0):
/* Set CAN error code to STF error */
hcan->ErrorCode |= HAL_CAN_ERROR_STF;
break;
case(CAN_ESR_LEC_1):
/* Set CAN error code to FOR error */
hcan->ErrorCode |= HAL_CAN_ERROR_FOR;
break;
case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0):
/* Set CAN error code to ACK error */
hcan->ErrorCode |= HAL_CAN_ERROR_ACK;
break;
case(CAN_ESR_LEC_2):
/* Set CAN error code to BR error */
hcan->ErrorCode |= HAL_CAN_ERROR_BR;
break;
case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0):
/* Set CAN error code to BD error */
hcan->ErrorCode |= HAL_CAN_ERROR_BD;
break;
case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1):
/* Set CAN error code to CRC error */
hcan->ErrorCode |= HAL_CAN_ERROR_CRC;
break;
default:
break;
}
/* Clear Last error code Flag */
hcan->Instance->ESR &= ~(CAN_ESR_LEC);
}
/* Call the Error call Back in case of Errors */
if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
{
/* Clear ERRI Flag */
hcan->Instance->MSR = CAN_MSR_ERRI;
/* Set the CAN state ready to be able to start again the process */
hcan->State = HAL_CAN_STATE_READY;
/* Disable interrupts: */
/* - Disable Error warning Interrupt */
/* - Disable Error passive Interrupt */
/* - Disable Bus-off Interrupt */
/* - Disable Last error code Interrupt */
/* - Disable Error Interrupt */
/* - Disable FIFO 0 message pending Interrupt */
/* - Disable FIFO 0 Overrun Interrupt */
/* - Disable FIFO 1 message pending Interrupt */
/* - Disable FIFO 1 Overrun Interrupt */
/* - Disable Transmit mailbox empty Interrupt */
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
CAN_IT_EPV |
CAN_IT_BOF |
CAN_IT_LEC |
CAN_IT_ERR |
CAN_IT_FMP0|
CAN_IT_FOV0|
CAN_IT_FMP1|
CAN_IT_FOV1|
CAN_IT_TME);
/* Call Error callback function */
HAL_CAN_ErrorCallback(hcan);
}
}
/**
* @brief Transmission complete callback in non blocking mode
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval None
*/
__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcan);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_CAN_TxCpltCallback could be implemented in the user file
*/
}
/**
* @brief Transmission complete callback in non blocking mode
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval None
*/
__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcan);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_CAN_RxCpltCallback could be implemented in the user file
*/
}
/**
* @brief Error CAN callback.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval None
*/
__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcan);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_CAN_ErrorCallback could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
* @brief CAN Peripheral State functions
*
@verbatim
==============================================================================
##### Peripheral State and Error functions #####
==============================================================================
[..]
This subsection provides functions allowing to :
(+) Check the CAN state.
(+) Check CAN Errors detected during interrupt process
@endverbatim
* @{
*/
/**
* @brief return the CAN state
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval HAL state
*/
HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan)
{
/* Return CAN state */
return hcan->State;
}
/**
* @brief Return the CAN error code
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval CAN Error Code
*/
uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
{
return hcan->ErrorCode;
}
/**
* @}
*/
/**
* @brief Initiates and transmits a CAN frame message.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval HAL status
*/
static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
{
/* Disable Transmit mailbox empty Interrupt */
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME);
if(hcan->State == HAL_CAN_STATE_BUSY_TX)
{
/* Disable Error warning, Error passive, Bus-off, Last error code
and Error Interrupts */
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
CAN_IT_EPV |
CAN_IT_BOF |
CAN_IT_LEC |
CAN_IT_ERR );
}
/* Change CAN state */
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX_RX0):
hcan->State = HAL_CAN_STATE_BUSY_RX0;
break;
case(HAL_CAN_STATE_BUSY_TX_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX1;
break;
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
break;
default: /* HAL_CAN_STATE_BUSY_TX */
hcan->State = HAL_CAN_STATE_READY;
break;
}
/* Transmission complete callback */
HAL_CAN_TxCpltCallback(hcan);
return HAL_OK;
}
/**
* @brief Receives a correct CAN frame.
* @param hcan Pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @param FIFONumber Specify the FIFO number
* @retval HAL status
* @retval None
*/
static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
{
uint32_t tmp1 = 0U;
CanRxMsgTypeDef* pRxMsg = NULL;
/* Set RxMsg pointer */
if(FIFONumber == CAN_FIFO0)
{
pRxMsg = hcan->pRxMsg;
}
else /* FIFONumber == CAN_FIFO1 */
{
pRxMsg = hcan->pRx1Msg;
}
/* Get the Id */
pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
if (pRxMsg->IDE == CAN_ID_STD)
{
pRxMsg->StdId = 0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U);
}
else
{
pRxMsg->ExtId = 0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U);
}
pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
/* Get the DLC */
pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
/* Get the FIFONumber */
pRxMsg->FIFONumber = FIFONumber;
/* Get the FMI */
pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U);
/* Get the data field */
pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U);
pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U);
pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U);
pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U);
pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U);
pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U);
/* Release the FIFO */
/* Release FIFO0 */
if (FIFONumber == CAN_FIFO0)
{
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
/* Disable FIFO 0 overrun and message pending Interrupt */
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_FOV0 | CAN_IT_FMP0);
}
/* Release FIFO1 */
else /* FIFONumber == CAN_FIFO1 */
{
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
/* Disable FIFO 1 overrun and message pending Interrupt */
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_FOV1 | CAN_IT_FMP1);
}
tmp1 = hcan->State;
if((tmp1 == HAL_CAN_STATE_BUSY_RX0) || (tmp1 == HAL_CAN_STATE_BUSY_RX1))
{
/* Disable Error warning, Error passive, Bus-off, Last error code
and Error Interrupts */
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
CAN_IT_EPV |
CAN_IT_BOF |
CAN_IT_LEC |
CAN_IT_ERR);
}
/* Change CAN state */
if (FIFONumber == CAN_FIFO0)
{
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX_RX0):
hcan->State = HAL_CAN_STATE_BUSY_TX;
break;
case(HAL_CAN_STATE_BUSY_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX1;
break;
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
break;
default: /* HAL_CAN_STATE_BUSY_RX0 */
hcan->State = HAL_CAN_STATE_READY;
break;
}
}
else /* FIFONumber == CAN_FIFO1 */
{
switch(hcan->State)
{
case(HAL_CAN_STATE_BUSY_TX_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX;
break;
case(HAL_CAN_STATE_BUSY_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_RX0;
break;
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
break;
default: /* HAL_CAN_STATE_BUSY_RX1 */
hcan->State = HAL_CAN_STATE_READY;
break;
}
}
/* Receive complete callback */
HAL_CAN_RxCpltCallback(hcan);
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#endif /* HAL_CAN_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_cortex.c
* @author MCD Application Team
* @brief CORTEX HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the CORTEX:
* + Initialization and de-initialization functions
* + Peripheral Control functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
*** How to configure Interrupts using CORTEX HAL driver ***
===========================================================
[..]
This section provides functions allowing to configure the NVIC interrupts (IRQ).
The Cortex-M4 exceptions are managed by CMSIS functions.
(#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
function according to the following table.
(#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
(#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
(#) please refer to programming manual for details in how to configure priority.
-@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
The pending IRQ priority will be managed only by the sub priority.
-@- IRQ priority order (sorted by highest to lowest priority):
(+@) Lowest preemption priority
(+@) Lowest sub priority
(+@) Lowest hardware priority (IRQ number)
[..]
*** How to configure Systick using CORTEX HAL driver ***
========================================================
[..]
Setup SysTick Timer for time base.
(+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
is a CMSIS function that:
(++) Configures the SysTick Reload register with value passed as function parameter.
(++) Configures the SysTick IRQ priority to the lowest value 0x0F.
(++) Resets the SysTick Counter register.
(++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
(++) Enables the SysTick Interrupt.
(++) Starts the SysTick Counter.
(+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
__HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
inside the stm32f4xx_hal_cortex.h file.
(+) You can change the SysTick IRQ priority by calling the
HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
(+) To adjust the SysTick time base, use the following formula:
Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
(++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
(++) Reload Value should not exceed 0xFFFFFF
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup CORTEX CORTEX
* @brief CORTEX HAL module driver
* @{
*/
#ifdef HAL_CORTEX_MODULE_ENABLED
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
* @{
*/
/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### Initialization and de-initialization functions #####
==============================================================================
[..]
This section provides the CORTEX HAL driver functions allowing to configure Interrupts
Systick functionalities
@endverbatim
* @{
*/
/**
* @brief Sets the priority grouping field (preemption priority and subpriority)
* using the required unlock sequence.
* @param PriorityGroup The priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
* 4 bits for subpriority
* @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
* 3 bits for subpriority
* @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
* 2 bits for subpriority
* @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
* 1 bits for subpriority
* @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
* 0 bits for subpriority
* @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
* The pending IRQ priority will be managed only by the subpriority.
* @retval None
*/
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
/* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
NVIC_SetPriorityGrouping(PriorityGroup);
}
/**
* @brief Sets the priority of an interrupt.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
* @param PreemptPriority The preemption priority for the IRQn channel.
* This parameter can be a value between 0 and 15
* A lower priority value indicates a higher priority
* @param SubPriority the subpriority level for the IRQ channel.
* This parameter can be a value between 0 and 15
* A lower priority value indicates a higher priority.
* @retval None
*/
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t prioritygroup = 0x00U;
/* Check the parameters */
assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
prioritygroup = NVIC_GetPriorityGrouping();
NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
}
/**
* @brief Enables a device specific interrupt in the NVIC interrupt controller.
* @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
* function should be called before.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
* @retval None
*/
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Enable interrupt */
NVIC_EnableIRQ(IRQn);
}
/**
* @brief Disables a device specific interrupt in the NVIC interrupt controller.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
* @retval None
*/
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Disable interrupt */
NVIC_DisableIRQ(IRQn);
}
/**
* @brief Initiates a system reset request to reset the MCU.
* @retval None
*/
void HAL_NVIC_SystemReset(void)
{
/* System Reset */
NVIC_SystemReset();
}
/**
* @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
* Counter is in free running mode to generate periodic interrupts.
* @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
* @retval status: - 0 Function succeeded.
* - 1 Function failed.
*/
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
{
return SysTick_Config(TicksNumb);
}
/**
* @}
*/
/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
* @brief Cortex control functions
*
@verbatim
==============================================================================
##### Peripheral Control functions #####
==============================================================================
[..]
This subsection provides a set of functions allowing to control the CORTEX
(NVIC, SYSTICK, MPU) functionalities.
@endverbatim
* @{
*/
#if (__MPU_PRESENT == 1U)
/**
* @brief Disables the MPU
* @retval None
*/
void HAL_MPU_Disable(void)
{
/* Make sure outstanding transfers are done */
__DMB();
/* Disable fault exceptions */
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
/* Disable the MPU and clear the control register*/
MPU->CTRL = 0U;
}
/**
* @brief Enable the MPU.
* @param MPU_Control Specifies the control mode of the MPU during hard fault,
* NMI, FAULTMASK and privileged access to the default memory
* This parameter can be one of the following values:
* @arg MPU_HFNMI_PRIVDEF_NONE
* @arg MPU_HARDFAULT_NMI
* @arg MPU_PRIVILEGED_DEFAULT
* @arg MPU_HFNMI_PRIVDEF
* @retval None
*/
void HAL_MPU_Enable(uint32_t MPU_Control)
{
/* Enable the MPU */
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
/* Enable fault exceptions */
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
/* Ensure MPU setting take effects */
__DSB();
__ISB();
}
/**
* @brief Initializes and configures the Region and the memory to be protected.
* @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
* the initialization and configuration information.
* @retval None
*/
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
{
/* Check the parameters */
assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
/* Set the Region number */
MPU->RNR = MPU_Init->Number;
if ((MPU_Init->Enable) != RESET)
{
/* Check the parameters */
assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
MPU->RBAR = MPU_Init->BaseAddress;
MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
}
else
{
MPU->RBAR = 0x00U;
MPU->RASR = 0x00U;
}
}
#endif /* __MPU_PRESENT */
/**
* @brief Gets the priority grouping field from the NVIC Interrupt Controller.
* @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
*/
uint32_t HAL_NVIC_GetPriorityGrouping(void)
{
/* Get the PRIGROUP[10:8] field value */
return NVIC_GetPriorityGrouping();
}
/**
* @brief Gets the priority of an interrupt.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
* @param PriorityGroup the priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
* 4 bits for subpriority
* @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
* 3 bits for subpriority
* @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
* 2 bits for subpriority
* @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
* 1 bits for subpriority
* @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
* 0 bits for subpriority
* @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0).
* @param pSubPriority Pointer on the Subpriority value (starting from 0).
* @retval None
*/
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
/* Get priority for Cortex-M system or device specific interrupts */
NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
}
/**
* @brief Sets Pending bit of an external interrupt.
* @param IRQn External interrupt number
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
* @retval None
*/
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Set interrupt pending */
NVIC_SetPendingIRQ(IRQn);
}
/**
* @brief Gets Pending Interrupt (reads the pending register in the NVIC
* and returns the pending bit for the specified interrupt).
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
* @retval status: - 0 Interrupt status is not pending.
* - 1 Interrupt status is pending.
*/
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Return 1 if pending else 0 */
return NVIC_GetPendingIRQ(IRQn);
}
/**
* @brief Clears the pending bit of an external interrupt.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
* @retval None
*/
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Clear pending interrupt */
NVIC_ClearPendingIRQ(IRQn);
}
/**
* @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
* @param IRQn External interrupt number
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
* @retval status: - 0 Interrupt status is not pending.
* - 1 Interrupt status is pending.
*/
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Return 1 if active else 0 */
return NVIC_GetActive(IRQn);
}
/**
* @brief Configures the SysTick clock source.
* @param CLKSource specifies the SysTick clock source.
* This parameter can be one of the following values:
* @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
* @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
* @retval None
*/
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
{
/* Check the parameters */
assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
{
SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
}
else
{
SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
}
}
/**
* @brief This function handles SYSTICK interrupt request.
* @retval None
*/
void HAL_SYSTICK_IRQHandler(void)
{
HAL_SYSTICK_Callback();
}
/**
* @brief SYSTICK callback.
* @retval None
*/
__weak void HAL_SYSTICK_Callback(void)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_SYSTICK_Callback could be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_CORTEX_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_dac.c
* @author MCD Application Team
* @brief DAC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Digital to Analog Converter (DAC) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
* + Peripheral Control functions
* + Peripheral State and Errors functions
*
*
@verbatim
==============================================================================
##### DAC Peripheral features #####
==============================================================================
[..]
*** DAC Channels ***
====================
[..]
The device integrates two 12-bit Digital Analog Converters that can
be used independently or simultaneously (dual mode):
(#) DAC channel1 with DAC_OUT1 (PA4) as output
(#) DAC channel2 with DAC_OUT2 (PA5) as output
*** DAC Triggers ***
====================
[..]
Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE
and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register.
[..]
Digital to Analog conversion can be triggered by:
(#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_TRIGGER_EXT_IT9.
The used pin (GPIOx_Pin9) must be configured in input mode.
(#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8
(DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...)
(#) Software using DAC_TRIGGER_SOFTWARE
*** DAC Buffer mode feature ***
===============================
[..]
Each DAC channel integrates an output buffer that can be used to
reduce the output impedance, and to drive external loads directly
without having to add an external operational amplifier.
To enable, the output buffer use
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
[..]
(@) Refer to the device datasheet for more details about output
impedance value with and without output buffer.
*** DAC wave generation feature ***
===================================
[..]
Both DAC channels can be used to generate
(#) Noise wave
(#) Triangle wave
*** DAC data format ***
=======================
[..]
The DAC data format can be:
(#) 8-bit right alignment using DAC_ALIGN_8B_R
(#) 12-bit left alignment using DAC_ALIGN_12B_L
(#) 12-bit right alignment using DAC_ALIGN_12B_R
*** DAC data value to voltage correspondence ***
================================================
[..]
The analog output voltage on each DAC channel pin is determined
by the following equation:
DAC_OUTx = VREF+ * DOR / 4095
with DOR is the Data Output Register
VEF+ is the input voltage reference (refer to the device datasheet)
e.g. To set DAC_OUT1 to 0.7V, use
Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
*** DMA requests ***
=====================
[..]
A DMA1 request can be generated when an external trigger (but not
a software trigger) occurs if DMA1 requests are enabled using
HAL_DAC_Start_DMA()
[..]
DMA1 requests are mapped as following:
(#) DAC channel1 : mapped on DMA1 Stream5 channel7 which must be
already configured
(#) DAC channel2 : mapped on DMA1 Stream6 channel7 which must be
already configured
-@- For Dual mode and specific signal (Triangle and noise) generation please
refer to Extension Features Driver description
##### How to use this driver #####
==============================================================================
[..]
(+) DAC APB clock must be enabled to get write access to DAC
registers using HAL_DAC_Init()
(+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
(+) Configure the DAC channel using HAL_DAC_ConfigChannel() function.
(+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA functions
*** Polling mode IO operation ***
=================================
[..]
(+) Start the DAC peripheral using HAL_DAC_Start()
(+) To read the DAC last data output value, use the HAL_DAC_GetValue() function.
(+) Stop the DAC peripheral using HAL_DAC_Stop()
*** DMA mode IO operation ***
==============================
[..]
(+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length
of data to be transferred at each end of conversion
(+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1()or HAL_DAC_ConvCpltCallbackCh2()
function is executed and user can add his own code by customization of function pointer
HAL_DAC_ConvCpltCallbackCh1 or HAL_DAC_ConvCpltCallbackCh2
(+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can
add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1
(+) Stop the DAC peripheral using HAL_DAC_Stop_DMA()
*** DAC HAL driver macros list ***
=============================================
[..]
Below the list of most used macros in DAC HAL driver.
(+) __HAL_DAC_ENABLE : Enable the DAC peripheral
(+) __HAL_DAC_DISABLE : Disable the DAC peripheral
(+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags
(+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status
[..]
(@) You can refer to the DAC HAL driver header file for more useful macros
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup DAC DAC
* @brief DAC driver modules
* @{
*/
#ifdef HAL_DAC_MODULE_ENABLED
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx)
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup DAC_Private_Functions
* @{
*/
/* Private function prototypes -----------------------------------------------*/
static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup DAC_Exported_Functions DAC Exported Functions
* @{
*/
/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### Initialization and de-initialization functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Initialize and configure the DAC.
(+) De-initialize the DAC.
@endverbatim
* @{
*/
/**
* @brief Initializes the DAC peripheral according to the specified parameters
* in the DAC_InitStruct.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac)
{
/* Check DAC handle */
if(hdac == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
if(hdac->State == HAL_DAC_STATE_RESET)
{
/* Allocate lock resource and initialize it */
hdac->Lock = HAL_UNLOCKED;
/* Init the low level hardware */
HAL_DAC_MspInit(hdac);
}
/* Initialize the DAC state*/
hdac->State = HAL_DAC_STATE_BUSY;
/* Set DAC error code to none */
hdac->ErrorCode = HAL_DAC_ERROR_NONE;
/* Initialize the DAC state*/
hdac->State = HAL_DAC_STATE_READY;
/* Return function status */
return HAL_OK;
}
/**
* @brief Deinitializes the DAC peripheral registers to their default reset values.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac)
{
/* Check DAC handle */
if(hdac == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
/* Change DAC state */
hdac->State = HAL_DAC_STATE_BUSY;
/* DeInit the low level hardware */
HAL_DAC_MspDeInit(hdac);
/* Set DAC error code to none */
hdac->ErrorCode = HAL_DAC_ERROR_NONE;
/* Change DAC state */
hdac->State = HAL_DAC_STATE_RESET;
/* Release Lock */
__HAL_UNLOCK(hdac);
/* Return function status */
return HAL_OK;
}
/**
* @brief Initializes the DAC MSP.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_MspInit could be implemented in the user file
*/
}
/**
* @brief DeInitializes the DAC MSP.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_MspDeInit could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup DAC_Exported_Functions_Group2 IO operation functions
* @brief IO operation functions
*
@verbatim
==============================================================================
##### IO operation functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Start conversion.
(+) Stop conversion.
(+) Start conversion and enable DMA transfer.
(+) Stop conversion and disable DMA transfer.
(+) Get result of conversion.
@endverbatim
* @{
*/
/**
* @brief Enables DAC and starts conversion of channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
{
uint32_t tmp1 = 0U, tmp2 = 0U;
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
/* Process locked */
__HAL_LOCK(hdac);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_BUSY;
/* Enable the Peripheral */
__HAL_DAC_ENABLE(hdac, Channel);
if(Channel == DAC_CHANNEL_1)
{
tmp1 = hdac->Instance->CR & DAC_CR_TEN1;
tmp2 = hdac->Instance->CR & DAC_CR_TSEL1;
/* Check if software trigger enabled */
if((tmp1 == DAC_CR_TEN1) && (tmp2 == DAC_CR_TSEL1))
{
/* Enable the selected DAC software conversion */
hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1;
}
}
else
{
tmp1 = hdac->Instance->CR & DAC_CR_TEN2;
tmp2 = hdac->Instance->CR & DAC_CR_TSEL2;
/* Check if software trigger enabled */
if((tmp1 == DAC_CR_TEN2) && (tmp2 == DAC_CR_TSEL2))
{
/* Enable the selected DAC software conversion*/
hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG2;
}
}
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hdac);
/* Return function status */
return HAL_OK;
}
/**
* @brief Disables DAC and stop conversion of channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
/* Disable the Peripheral */
__HAL_DAC_DISABLE(hdac, Channel);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
/* Return function status */
return HAL_OK;
}
/**
* @brief Enables DAC and starts conversion of channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
* @param pData The destination peripheral Buffer address.
* @param Length The length of data to be transferred from memory to DAC peripheral
* @param Alignment Specifies the data alignment for DAC channel.
* This parameter can be one of the following values:
* @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
* @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
* @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
{
uint32_t tmpreg = 0U;
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
assert_param(IS_DAC_ALIGN(Alignment));
/* Process locked */
__HAL_LOCK(hdac);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_BUSY;
if(Channel == DAC_CHANNEL_1)
{
/* Set the DMA transfer complete callback for channel1 */
hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
/* Set the DMA half transfer complete callback for channel1 */
hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
/* Set the DMA error callback for channel1 */
hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
/* Enable the selected DAC channel1 DMA request */
hdac->Instance->CR |= DAC_CR_DMAEN1;
/* Case of use of channel 1 */
switch(Alignment)
{
case DAC_ALIGN_12B_R:
/* Get DHR12R1 address */
tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
break;
case DAC_ALIGN_12B_L:
/* Get DHR12L1 address */
tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
break;
case DAC_ALIGN_8B_R:
/* Get DHR8R1 address */
tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
break;
default:
break;
}
}
else
{
/* Set the DMA transfer complete callback for channel2 */
hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2;
/* Set the DMA half transfer complete callback for channel2 */
hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2;
/* Set the DMA error callback for channel2 */
hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2;
/* Enable the selected DAC channel2 DMA request */
hdac->Instance->CR |= DAC_CR_DMAEN2;
/* Case of use of channel 2 */
switch(Alignment)
{
case DAC_ALIGN_12B_R:
/* Get DHR12R2 address */
tmpreg = (uint32_t)&hdac->Instance->DHR12R2;
break;
case DAC_ALIGN_12B_L:
/* Get DHR12L2 address */
tmpreg = (uint32_t)&hdac->Instance->DHR12L2;
break;
case DAC_ALIGN_8B_R:
/* Get DHR8R2 address */
tmpreg = (uint32_t)&hdac->Instance->DHR8R2;
break;
default:
break;
}
}
/* Enable the DMA Stream */
if(Channel == DAC_CHANNEL_1)
{
/* Enable the DAC DMA underrun interrupt */
__HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
/* Enable the DMA Stream */
HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
}
else
{
/* Enable the DAC DMA underrun interrupt */
__HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2);
/* Enable the DMA Stream */
HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
}
/* Enable the Peripheral */
__HAL_DAC_ENABLE(hdac, Channel);
/* Process Unlocked */
__HAL_UNLOCK(hdac);
/* Return function status */
return HAL_OK;
}
/**
* @brief Disables DAC and stop conversion of channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
/* Disable the selected DAC channel DMA request */
hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << Channel);
/* Disable the Peripheral */
__HAL_DAC_DISABLE(hdac, Channel);
/* Disable the DMA Channel */
/* Channel1 is used */
if(Channel == DAC_CHANNEL_1)
{
status = HAL_DMA_Abort(hdac->DMA_Handle1);
}
else /* Channel2 is used for */
{
status = HAL_DMA_Abort(hdac->DMA_Handle2);
}
/* Check if DMA Channel effectively disabled */
if(status != HAL_OK)
{
/* Update DAC state machine to error */
hdac->State = HAL_DAC_STATE_ERROR;
}
else
{
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
}
/* Return function status */
return status;
}
/**
* @brief Returns the last data output value of the selected DAC channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
* @retval The selected DAC channel data output value.
*/
uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
/* Returns the DAC channel data output register value */
if(Channel == DAC_CHANNEL_1)
{
return hdac->Instance->DOR1;
}
else
{
return hdac->Instance->DOR2;
}
}
/**
* @brief Handles DAC interrupt request
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
{
/* Check underrun channel 1 flag */
if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
{
/* Change DAC state to error state */
hdac->State = HAL_DAC_STATE_ERROR;
/* Set DAC error code to channel1 DMA underrun error */
hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
/* Clear the underrun flag */
__HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
/* Disable the selected DAC channel1 DMA request */
hdac->Instance->CR &= ~DAC_CR_DMAEN1;
/* Error callback */
HAL_DAC_DMAUnderrunCallbackCh1(hdac);
}
/* Check underrun channel 2 flag */
if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2))
{
/* Change DAC state to error state */
hdac->State = HAL_DAC_STATE_ERROR;
/* Set DAC error code to channel2 DMA underrun error */
hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH2;
/* Clear the underrun flag */
__HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR2);
/* Disable the selected DAC channel1 DMA request */
hdac->Instance->CR &= ~DAC_CR_DMAEN2;
/* Error callback */
HAL_DACEx_DMAUnderrunCallbackCh2(hdac);
}
}
/**
* @brief Conversion complete callback in non blocking mode for Channel1
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_ConvCpltCallback could be implemented in the user file
*/
}
/**
* @brief Conversion half DMA transfer callback in non blocking mode for Channel1
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file
*/
}
/**
* @brief Error DAC callback for Channel1.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file
*/
}
/**
* @brief DMA underrun DAC callback for channel1.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions
* @brief Peripheral Control functions
*
@verbatim
==============================================================================
##### Peripheral Control functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Configure channels.
(+) Set the specified data holding register value for DAC channel.
@endverbatim
* @{
*/
/**
* @brief Configures the selected DAC channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param sConfig DAC configuration structure.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
{
uint32_t tmpreg1 = 0U, tmpreg2 = 0U;
/* Check the DAC parameters */
assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
assert_param(IS_DAC_CHANNEL(Channel));
/* Process locked */
__HAL_LOCK(hdac);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_BUSY;
/* Get the DAC CR value */
tmpreg1 = hdac->Instance->CR;
/* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
/* Configure for the selected DAC channel: buffer output, trigger */
/* Set TSELx and TENx bits according to DAC_Trigger value */
/* Set BOFFx bit according to DAC_OutputBuffer value */
tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
/* Calculate CR register value depending on DAC_Channel */
tmpreg1 |= tmpreg2 << Channel;
/* Write to DAC CR */
hdac->Instance->CR = tmpreg1;
/* Disable wave generation */
hdac->Instance->CR &= ~(DAC_CR_WAVE1 << Channel);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hdac);
/* Return function status */
return HAL_OK;
}
/**
* @brief Set the specified data holding register value for DAC channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
* @param Alignment Specifies the data alignment.
* This parameter can be one of the following values:
* @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
* @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
* @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
* @param Data Data to be loaded in the selected data holding register.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
{
__IO uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
assert_param(IS_DAC_ALIGN(Alignment));
assert_param(IS_DAC_DATA(Data));
tmp = (uint32_t)hdac->Instance;
if(Channel == DAC_CHANNEL_1)
{
tmp += DAC_DHR12R1_ALIGNMENT(Alignment);
}
else
{
tmp += DAC_DHR12R2_ALIGNMENT(Alignment);
}
/* Set the DAC channel1 selected data holding register */
*(__IO uint32_t *) tmp = Data;
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions
* @brief Peripheral State and Errors functions
*
@verbatim
==============================================================================
##### Peripheral State and Errors functions #####
==============================================================================
[..]
This subsection provides functions allowing to
(+) Check the DAC state.
(+) Check the DAC Errors.
@endverbatim
* @{
*/
/**
* @brief return the DAC state
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval HAL state
*/
HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac)
{
/* Return DAC state */
return hdac->State;
}
/**
* @brief Return the DAC error code
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval DAC Error Code
*/
uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac)
{
return hdac->ErrorCode;
}
/**
* @}
*/
/**
* @brief DMA conversion complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma)
{
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
HAL_DAC_ConvCpltCallbackCh1(hdac);
hdac->State= HAL_DAC_STATE_READY;
}
/**
* @brief DMA half transfer complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma)
{
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Conversion complete callback */
HAL_DAC_ConvHalfCpltCallbackCh1(hdac);
}
/**
* @brief DMA error callback
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma)
{
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Set DAC error code to DMA error */
hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
HAL_DAC_ErrorCallbackCh1(hdac);
hdac->State= HAL_DAC_STATE_READY;
}
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx ||\
STM32F413xx || STM32F423xx */
#endif /* HAL_DAC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_dac_ex.c
* @author MCD Application Team
* @brief DAC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of DAC extension peripheral:
* + Extended features functions
*
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) :
Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2.
(+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
(+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup DACEx DACEx
* @brief DAC driver modules
* @{
*/
#ifdef HAL_DAC_MODULE_ENABLED
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx)
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup DACEx_Exported_Functions DAC Exported Functions
* @{
*/
/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions
* @brief Extended features functions
*
@verbatim
==============================================================================
##### Extended features functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Start conversion.
(+) Stop conversion.
(+) Start conversion and enable DMA transfer.
(+) Stop conversion and disable DMA transfer.
(+) Get result of conversion.
(+) Get result of dual mode conversion.
@endverbatim
* @{
*/
/**
* @brief Returns the last data output value of the selected DAC channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval The selected DAC channel data output value.
*/
uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
{
uint32_t tmp = 0U;
tmp |= hdac->Instance->DOR1;
tmp |= hdac->Instance->DOR2 << 16U;
/* Returns the DAC channel data output register value */
return tmp;
}
/**
* @brief Enables or disables the selected DAC channel wave generation.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* DAC_CHANNEL_1 / DAC_CHANNEL_2
* @param Amplitude Select max triangle amplitude.
* This parameter can be one of the following values:
* @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
* @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
* @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
* @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
* @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
* @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
* @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
* @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
* @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
* @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
* @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
* @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
/* Process locked */
__HAL_LOCK(hdac);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_BUSY;
/* Enable the selected wave generation for the selected DAC channel */
MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hdac);
/* Return function status */
return HAL_OK;
}
/**
* @brief Enables or disables the selected DAC channel wave generation.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Channel The selected DAC channel.
* This parameter can be one of the following values:
* DAC_CHANNEL_1 / DAC_CHANNEL_2
* @param Amplitude Unmask DAC channel LFSR for noise wave generation.
* This parameter can be one of the following values:
* @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
* @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation
* @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
/* Process locked */
__HAL_LOCK(hdac);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_BUSY;
/* Enable the selected wave generation for the selected DAC channel */
MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel);
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hdac);
/* Return function status */
return HAL_OK;
}
/**
* @brief Set the specified data holding register value for dual DAC channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @param Alignment Specifies the data alignment for dual channel DAC.
* This parameter can be one of the following values:
* DAC_ALIGN_8B_R: 8bit right data alignment selected
* DAC_ALIGN_12B_L: 12bit left data alignment selected
* DAC_ALIGN_12B_R: 12bit right data alignment selected
* @param Data1 Data for DAC Channel2 to be loaded in the selected data holding register.
* @param Data2 Data for DAC Channel1 to be loaded in the selected data holding register.
* @note In dual mode, a unique register access is required to write in both
* DAC channels at the same time.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
{
uint32_t data = 0U, tmp = 0U;
/* Check the parameters */
assert_param(IS_DAC_ALIGN(Alignment));
assert_param(IS_DAC_DATA(Data1));
assert_param(IS_DAC_DATA(Data2));
/* Calculate and set dual DAC data holding register value */
if (Alignment == DAC_ALIGN_8B_R)
{
data = ((uint32_t)Data2 << 8U) | Data1;
}
else
{
data = ((uint32_t)Data2 << 16U) | Data1;
}
tmp = (uint32_t)hdac->Instance;
tmp += DAC_DHR12RD_ALIGNMENT(Alignment);
/* Set the dual DAC selected data holding register */
*(__IO uint32_t *)tmp = data;
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/**
* @brief Conversion complete callback in non blocking mode for Channel2
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_ConvCpltCallback could be implemented in the user file
*/
}
/**
* @brief Conversion half DMA transfer callback in non blocking mode for Channel2
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_ConvHalfCpltCallbackCh2 could be implemented in the user file
*/
}
/**
* @brief Error DAC callback for Channel2.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_ErrorCallback could be implemented in the user file
*/
}
/**
* @brief DMA underrun DAC callback for channel2.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
* the configuration information for the specified DAC.
* @retval None
*/
__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hdac);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file
*/
}
/**
* @brief DMA conversion complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)
{
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
HAL_DACEx_ConvCpltCallbackCh2(hdac);
hdac->State= HAL_DAC_STATE_READY;
}
/**
* @brief DMA half transfer complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)
{
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Conversion complete callback */
HAL_DACEx_ConvHalfCpltCallbackCh2(hdac);
}
/**
* @brief DMA error callback
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)
{
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Set DAC error code to DMA error */
hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
HAL_DACEx_ErrorCallbackCh2(hdac);
hdac->State= HAL_DAC_STATE_READY;
}
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx ||\
STM32F413xx || STM32F423xx */
#endif /* HAL_DAC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_dma.c
* @author MCD Application Team
* @brief DMA HAL module driver.
*
* This file provides firmware functions to manage the following
* functionalities of the Direct Memory Access (DMA) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
* + Peripheral State and errors functions
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#) Enable and configure the peripheral to be connected to the DMA Stream
(except for internal SRAM/FLASH memories: no initialization is
necessary) please refer to Reference manual for connection between peripherals
and DMA requests.
(#) For a given Stream, program the required configuration through the following parameters:
Transfer Direction, Source and Destination data formats,
Circular, Normal or peripheral flow control mode, Stream Priority level,
Source and Destination Increment mode, FIFO mode and its Threshold (if needed),
Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
-@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros:
__HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE().
*** Polling mode IO operation ***
=================================
[..]
(+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
address and destination address and the Length of data to be transferred.
(+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
case a fixed Timeout can be configured by User depending from his application.
(+) Use HAL_DMA_Abort() function to abort the current transfer.
*** Interrupt mode IO operation ***
===================================
[..]
(+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
(+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
(+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
Source address and destination address and the Length of data to be transferred. In this
case the DMA interrupt is configured
(+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
(+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
add his own function by customization of function pointer XferCpltCallback and
XferErrorCallback (i.e a member of DMA handle structure).
[..]
(#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
detection.
(#) Use HAL_DMA_Abort_IT() function to abort the current transfer
-@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
-@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
Half-Word data size for the peripheral to access its data register and set Word data size
for the Memory to gain in access time. Each two half words will be packed and written in
a single access to a Word in the Memory).
-@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
and Destination. In this case the Peripheral Data Size will be applied to both Source
and Destination.
*** DMA HAL driver macros list ***
=============================================
[..]
Below the list of most used macros in DMA HAL driver.
(+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
(+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
(+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not.
[..]
(@) You can refer to the DMA HAL driver header file for more useful macros
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup DMA DMA
* @brief DMA HAL module driver
* @{
*/
#ifdef HAL_DMA_MODULE_ENABLED
/* Private types -------------------------------------------------------------*/
typedef struct
{
__IO uint32_t ISR; /*!< DMA interrupt status register */
__IO uint32_t Reserved0;
__IO uint32_t IFCR; /*!< DMA interrupt flag clear register */
} DMA_Base_Registers;
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup DMA_Private_Constants
* @{
*/
#define HAL_TIMEOUT_DMA_ABORT 5U /* 5 ms */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @addtogroup DMA_Private_Functions
* @{
*/
static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/* Exported functions ---------------------------------------------------------*/
/** @addtogroup DMA_Exported_Functions
* @{
*/
/** @addtogroup DMA_Exported_Functions_Group1
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..]
This section provides functions allowing to initialize the DMA Stream source
and destination addresses, incrementation and data sizes, transfer direction,
circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
[..]
The HAL_DMA_Init() function follows the DMA configuration procedures as described in
reference manual.
@endverbatim
* @{
*/
/**
* @brief Initialize the DMA according to the specified
* parameters in the DMA_InitTypeDef and create the associated handle.
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
{
uint32_t tmp = 0U;
uint32_t tickstart = HAL_GetTick();
DMA_Base_Registers *regs;
/* Check the DMA peripheral state */
if(hdma == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
assert_param(IS_DMA_CHANNEL(hdma->Init.Channel));
assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
assert_param(IS_DMA_MODE(hdma->Init.Mode));
assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode));
/* Check the memory burst, peripheral burst and FIFO threshold parameters only
when FIFO mode is enabled */
if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE)
{
assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold));
assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
}
/* Allocate lock resource */
__HAL_UNLOCK(hdma);
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
/* Disable the peripheral */
__HAL_DMA_DISABLE(hdma);
/* Check if the DMA Stream is effectively disabled */
while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
{
/* Check for the Timeout */
if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
{
/* Update error code */
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
/* Get the CR register value */
tmp = hdma->Instance->CR;
/* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */
tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \
DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \
DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \
DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM));
/* Prepare the DMA Stream configuration */
tmp |= hdma->Init.Channel | hdma->Init.Direction |
hdma->Init.PeriphInc | hdma->Init.MemInc |
hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
hdma->Init.Mode | hdma->Init.Priority;
/* the Memory burst and peripheral burst are not used when the FIFO is disabled */
if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
{
/* Get memory burst and peripheral burst */
tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst;
}
/* Write to DMA Stream CR register */
hdma->Instance->CR = tmp;
/* Get the FCR register value */
tmp = hdma->Instance->FCR;
/* Clear Direct mode and FIFO threshold bits */
tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH);
/* Prepare the DMA Stream FIFO configuration */
tmp |= hdma->Init.FIFOMode;
/* The FIFO threshold is not used when the FIFO mode is disabled */
if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
{
/* Get the FIFO threshold */
tmp |= hdma->Init.FIFOThreshold;
/* Check compatibility between FIFO threshold level and size of the memory burst */
/* for INCR4, INCR8, INCR16 bursts */
if (hdma->Init.MemBurst != DMA_MBURST_SINGLE)
{
if (DMA_CheckFifoParam(hdma) != HAL_OK)
{
/* Update error code */
hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
return HAL_ERROR;
}
}
}
/* Write to DMA Stream FCR */
hdma->Instance->FCR = tmp;
/* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate
DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
/* Clear all interrupt flags */
regs->IFCR = 0x3FU << hdma->StreamIndex;
/* Initialize the error code */
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
/* Initialize the DMA state */
hdma->State = HAL_DMA_STATE_READY;
return HAL_OK;
}
/**
* @brief DeInitializes the DMA peripheral
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
{
DMA_Base_Registers *regs;
/* Check the DMA peripheral state */
if(hdma == NULL)
{
return HAL_ERROR;
}
/* Check the DMA peripheral state */
if(hdma->State == HAL_DMA_STATE_BUSY)
{
/* Return error status */
return HAL_BUSY;
}
/* Check the parameters */
assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
/* Disable the selected DMA Streamx */
__HAL_DMA_DISABLE(hdma);
/* Reset DMA Streamx control register */
hdma->Instance->CR = 0U;
/* Reset DMA Streamx number of data to transfer register */
hdma->Instance->NDTR = 0U;
/* Reset DMA Streamx peripheral address register */
hdma->Instance->PAR = 0U;
/* Reset DMA Streamx memory 0 address register */
hdma->Instance->M0AR = 0U;
/* Reset DMA Streamx memory 1 address register */
hdma->Instance->M1AR = 0U;
/* Reset DMA Streamx FIFO control register */
hdma->Instance->FCR = 0x00000021U;
/* Get DMA steam Base Address */
regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
/* Clear all interrupt flags at correct offset within the register */
regs->IFCR = 0x3FU << hdma->StreamIndex;
/* Initialize the error code */
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
/* Initialize the DMA state */
hdma->State = HAL_DMA_STATE_RESET;
/* Release Lock */
__HAL_UNLOCK(hdma);
return HAL_OK;
}
/**
* @}
*/
/** @addtogroup DMA_Exported_Functions_Group2
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure the source, destination address and data length and Start DMA transfer
(+) Configure the source, destination address and data length and
Start DMA transfer with interrupt
(+) Abort DMA transfer
(+) Poll for transfer complete
(+) Handle DMA interrupt request
@endverbatim
* @{
*/
/**
* @brief Starts the DMA Transfer.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress The source memory Buffer address
* @param DstAddress The destination memory Buffer address
* @param DataLength The length of data to be transferred from source to destination
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
/* Process locked */
__HAL_LOCK(hdma);
if(HAL_DMA_STATE_READY == hdma->State)
{
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
/* Initialize the error code */
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
/* Configure the source, destination address and the data length */
DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
/* Enable the Peripheral */
__HAL_DMA_ENABLE(hdma);
}
else
{
/* Process unlocked */
__HAL_UNLOCK(hdma);
/* Return error status */
status = HAL_BUSY;
}
return status;
}
/**
* @brief Start the DMA Transfer with interrupt enabled.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress The source memory Buffer address
* @param DstAddress The destination memory Buffer address
* @param DataLength The length of data to be transferred from source to destination
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
{
HAL_StatusTypeDef status = HAL_OK;
/* calculate DMA base and stream number */
DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
/* Check the parameters */
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
/* Process locked */
__HAL_LOCK(hdma);
if(HAL_DMA_STATE_READY == hdma->State)
{
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
/* Initialize the error code */
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
/* Configure the source, destination address and the data length */
DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
/* Clear all interrupt flags at correct offset within the register */
regs->IFCR = 0x3FU << hdma->StreamIndex;
/* Enable Common interrupts*/
hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
hdma->Instance->FCR |= DMA_IT_FE;
if(hdma->XferHalfCpltCallback != NULL)
{
hdma->Instance->CR |= DMA_IT_HT;
}
/* Enable the Peripheral */
__HAL_DMA_ENABLE(hdma);
}
else
{
/* Process unlocked */
__HAL_UNLOCK(hdma);
/* Return error status */
status = HAL_BUSY;
}
return status;
}
/**
* @brief Aborts the DMA Transfer.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
*
* @note After disabling a DMA Stream, a check for wait until the DMA Stream is
* effectively disabled is added. If a Stream is disabled
* while a data transfer is ongoing, the current data will be transferred
* and the Stream will be effectively disabled only after the transfer of
* this single data is finished.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
{
/* calculate DMA base and stream number */
DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
uint32_t tickstart = HAL_GetTick();
if(hdma->State != HAL_DMA_STATE_BUSY)
{
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
/* Process Unlocked */
__HAL_UNLOCK(hdma);
return HAL_ERROR;
}
else
{
/* Disable all the transfer interrupts */
hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
hdma->Instance->FCR &= ~(DMA_IT_FE);
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
{
hdma->Instance->CR &= ~(DMA_IT_HT);
}
/* Disable the stream */
__HAL_DMA_DISABLE(hdma);
/* Check if the DMA Stream is effectively disabled */
while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
{
/* Check for the Timeout */
if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
{
/* Update error code */
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
/* Process Unlocked */
__HAL_UNLOCK(hdma);
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
/* Clear all interrupt flags at correct offset within the register */
regs->IFCR = 0x3FU << hdma->StreamIndex;
/* Process Unlocked */
__HAL_UNLOCK(hdma);
/* Change the DMA state*/
hdma->State = HAL_DMA_STATE_READY;
}
return HAL_OK;
}
/**
* @brief Aborts the DMA Transfer in Interrupt mode.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
{
if(hdma->State != HAL_DMA_STATE_BUSY)
{
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
return HAL_ERROR;
}
else
{
/* Set Abort State */
hdma->State = HAL_DMA_STATE_ABORT;
/* Disable the stream */
__HAL_DMA_DISABLE(hdma);
}
return HAL_OK;
}
/**
* @brief Polling for transfer complete.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param CompleteLevel Specifies the DMA level complete.
* @note The polling mode is kept in this version for legacy. it is recommanded to use the IT model instead.
* This model could be used for debug purpose.
* @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode).
* @param Timeout Timeout duration.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout)
{
HAL_StatusTypeDef status = HAL_OK;
uint32_t mask_cpltlevel;
uint32_t tickstart = HAL_GetTick();
uint32_t tmpisr;
/* calculate DMA base and stream number */
DMA_Base_Registers *regs;
if(HAL_DMA_STATE_BUSY != hdma->State)
{
/* No transfer ongoing */
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
__HAL_UNLOCK(hdma);
return HAL_ERROR;
}
/* Polling mode not supported in circular mode and double buffering mode */
if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET)
{
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
return HAL_ERROR;
}
/* Get the level transfer complete flag */
if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
{
/* Transfer Complete flag */
mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
}
else
{
/* Half Transfer Complete flag */
mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
}
regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
tmpisr = regs->ISR;
while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET))
{
/* Check for the Timeout (Not applicable in circular mode)*/
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
/* Update error code */
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
/* Process Unlocked */
__HAL_UNLOCK(hdma);
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
return HAL_TIMEOUT;
}
}
/* Get the ISR register value */
tmpisr = regs->ISR;
if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
{
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_TE;
/* Clear the transfer error flag */
regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
}
if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
{
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_FE;
/* Clear the FIFO error flag */
regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
}
if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
{
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_DME;
/* Clear the Direct Mode error flag */
regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
}
}
if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
{
if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
{
HAL_DMA_Abort(hdma);
/* Clear the half transfer and transfer complete flags */
regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
/* Process Unlocked */
__HAL_UNLOCK(hdma);
/* Change the DMA state */
hdma->State= HAL_DMA_STATE_READY;
return HAL_ERROR;
}
}
/* Get the level transfer complete flag */
if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
{
/* Clear the half transfer and transfer complete flags */
regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
/* Process Unlocked */
__HAL_UNLOCK(hdma);
hdma->State = HAL_DMA_STATE_READY;
}
else
{
/* Clear the half transfer and transfer complete flags */
regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex;
}
return status;
}
/**
* @brief Handles DMA interrupt request.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval None
*/
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
{
uint32_t tmpisr;
__IO uint32_t count = 0U;
uint32_t timeout = SystemCoreClock / 9600U;
/* calculate DMA base and stream number */
DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
tmpisr = regs->ISR;
/* Transfer Error Interrupt management ***************************************/
if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
{
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
{
/* Disable the transfer error interrupt */
hdma->Instance->CR &= ~(DMA_IT_TE);
/* Clear the transfer error flag */
regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_TE;
}
}
/* FIFO Error Interrupt management ******************************************/
if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
{
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
{
/* Clear the FIFO error flag */
regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_FE;
}
}
/* Direct Mode Error Interrupt management ***********************************/
if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
{
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
{
/* Clear the direct mode error flag */
regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_DME;
}
}
/* Half Transfer Complete Interrupt management ******************************/
if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET)
{
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
{
/* Clear the half transfer complete flag */
regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
/* Multi_Buffering mode enabled */
if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
{
/* Current memory buffer used is Memory 0 */
if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
{
if(hdma->XferHalfCpltCallback != NULL)
{
/* Half transfer callback */
hdma->XferHalfCpltCallback(hdma);
}
}
/* Current memory buffer used is Memory 1 */
else
{
if(hdma->XferM1HalfCpltCallback != NULL)
{
/* Half transfer callback */
hdma->XferM1HalfCpltCallback(hdma);
}
}
}
else
{
/* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
{
/* Disable the half transfer interrupt */
hdma->Instance->CR &= ~(DMA_IT_HT);
}
if(hdma->XferHalfCpltCallback != NULL)
{
/* Half transfer callback */
hdma->XferHalfCpltCallback(hdma);
}
}
}
}
/* Transfer Complete Interrupt management ***********************************/
if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET)
{
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
{
/* Clear the transfer complete flag */
regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
if(HAL_DMA_STATE_ABORT == hdma->State)
{
/* Disable all the transfer interrupts */
hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
hdma->Instance->FCR &= ~(DMA_IT_FE);
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
{
hdma->Instance->CR &= ~(DMA_IT_HT);
}
/* Clear all interrupt flags at correct offset within the register */
regs->IFCR = 0x3FU << hdma->StreamIndex;
/* Process Unlocked */
__HAL_UNLOCK(hdma);
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
if(hdma->XferAbortCallback != NULL)
{
hdma->XferAbortCallback(hdma);
}
return;
}
if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
{
/* Current memory buffer used is Memory 0 */
if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
{
if(hdma->XferM1CpltCallback != NULL)
{
/* Transfer complete Callback for memory1 */
hdma->XferM1CpltCallback(hdma);
}
}
/* Current memory buffer used is Memory 1 */
else
{
if(hdma->XferCpltCallback != NULL)
{
/* Transfer complete Callback for memory0 */
hdma->XferCpltCallback(hdma);
}
}
}
/* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
else
{
if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
{
/* Disable the transfer complete interrupt */
hdma->Instance->CR &= ~(DMA_IT_TC);
/* Process Unlocked */
__HAL_UNLOCK(hdma);
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
}
if(hdma->XferCpltCallback != NULL)
{
/* Transfer complete callback */
hdma->XferCpltCallback(hdma);
}
}
}
}
/* manage error case */
if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
{
if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
{
hdma->State = HAL_DMA_STATE_ABORT;
/* Disable the stream */
__HAL_DMA_DISABLE(hdma);
do
{
if (++count > timeout)
{
break;
}
}
while((hdma->Instance->CR & DMA_SxCR_EN) != RESET);
/* Process Unlocked */
__HAL_UNLOCK(hdma);
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
}
if(hdma->XferErrorCallback != NULL)
{
/* Transfer error callback */
hdma->XferErrorCallback(hdma);
}
}
}
/**
* @brief Register callbacks
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param CallbackID User Callback identifer
* a DMA_HandleTypeDef structure as parameter.
* @param pCallback pointer to private callbacsk function which has pointer to
* a DMA_HandleTypeDef structure as parameter.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma))
{
HAL_StatusTypeDef status = HAL_OK;
/* Process locked */
__HAL_LOCK(hdma);
if(HAL_DMA_STATE_READY == hdma->State)
{
switch (CallbackID)
{
case HAL_DMA_XFER_CPLT_CB_ID:
hdma->XferCpltCallback = pCallback;
break;
case HAL_DMA_XFER_HALFCPLT_CB_ID:
hdma->XferHalfCpltCallback = pCallback;
break;
case HAL_DMA_XFER_M1CPLT_CB_ID:
hdma->XferM1CpltCallback = pCallback;
break;
case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
hdma->XferM1HalfCpltCallback = pCallback;
break;
case HAL_DMA_XFER_ERROR_CB_ID:
hdma->XferErrorCallback = pCallback;
break;
case HAL_DMA_XFER_ABORT_CB_ID:
hdma->XferAbortCallback = pCallback;
break;
default:
break;
}
}
else
{
/* Return error status */
status = HAL_ERROR;
}
/* Release Lock */
__HAL_UNLOCK(hdma);
return status;
}
/**
* @brief UnRegister callbacks
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param CallbackID User Callback identifer
* a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
{
HAL_StatusTypeDef status = HAL_OK;
/* Process locked */
__HAL_LOCK(hdma);
if(HAL_DMA_STATE_READY == hdma->State)
{
switch (CallbackID)
{
case HAL_DMA_XFER_CPLT_CB_ID:
hdma->XferCpltCallback = NULL;
break;
case HAL_DMA_XFER_HALFCPLT_CB_ID:
hdma->XferHalfCpltCallback = NULL;
break;
case HAL_DMA_XFER_M1CPLT_CB_ID:
hdma->XferM1CpltCallback = NULL;
break;
case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
hdma->XferM1HalfCpltCallback = NULL;
break;
case HAL_DMA_XFER_ERROR_CB_ID:
hdma->XferErrorCallback = NULL;
break;
case HAL_DMA_XFER_ABORT_CB_ID:
hdma->XferAbortCallback = NULL;
break;
case HAL_DMA_XFER_ALL_CB_ID:
hdma->XferCpltCallback = NULL;
hdma->XferHalfCpltCallback = NULL;
hdma->XferM1CpltCallback = NULL;
hdma->XferM1HalfCpltCallback = NULL;
hdma->XferErrorCallback = NULL;
hdma->XferAbortCallback = NULL;
break;
default:
status = HAL_ERROR;
break;
}
}
else
{
status = HAL_ERROR;
}
/* Release Lock */
__HAL_UNLOCK(hdma);
return status;
}
/**
* @}
*/
/** @addtogroup DMA_Exported_Functions_Group3
*
@verbatim
===============================================================================
##### State and Errors functions #####
===============================================================================
[..]
This subsection provides functions allowing to
(+) Check the DMA state
(+) Get error code
@endverbatim
* @{
*/
/**
* @brief Returns the DMA state.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval HAL state
*/
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
{
return hdma->State;
}
/**
* @brief Return the DMA error code
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval DMA Error Code
*/
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
{
return hdma->ErrorCode;
}
/**
* @}
*/
/**
* @}
*/
/** @addtogroup DMA_Private_Functions
* @{
*/
/**
* @brief Sets the DMA Transfer parameter.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress The source memory Buffer address
* @param DstAddress The destination memory Buffer address
* @param DataLength The length of data to be transferred from source to destination
* @retval HAL status
*/
static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
{
/* Clear DBM bit */
hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM);
/* Configure DMA Stream data length */
hdma->Instance->NDTR = DataLength;
/* Memory to Peripheral */
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
{
/* Configure DMA Stream destination address */
hdma->Instance->PAR = DstAddress;
/* Configure DMA Stream source address */
hdma->Instance->M0AR = SrcAddress;
}
/* Peripheral to Memory */
else
{
/* Configure DMA Stream source address */
hdma->Instance->PAR = SrcAddress;
/* Configure DMA Stream destination address */
hdma->Instance->M0AR = DstAddress;
}
}
/**
* @brief Returns the DMA Stream base address depending on stream number
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval Stream base address
*/
static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
{
uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U;
/* lookup table for necessary bitshift of flags within status registers */
static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U};
hdma->StreamIndex = flagBitshiftOffset[stream_number];
if (stream_number > 3U)
{
/* return pointer to HISR and HIFCR */
hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U);
}
else
{
/* return pointer to LISR and LIFCR */
hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU));
}
return hdma->StreamBaseAddress;
}
/**
* @brief Check compatibility between FIFO threshold level and size of the memory burst
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval HAL status
*/
static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
{
HAL_StatusTypeDef status = HAL_OK;
uint32_t tmp = hdma->Init.FIFOThreshold;
/* Memory Data size equal to Byte */
if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE)
{
switch (tmp)
{
case DMA_FIFO_THRESHOLD_1QUARTERFULL:
case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
{
status = HAL_ERROR;
}
break;
case DMA_FIFO_THRESHOLD_HALFFULL:
if (hdma->Init.MemBurst == DMA_MBURST_INC16)
{
status = HAL_ERROR;
}
break;
case DMA_FIFO_THRESHOLD_FULL:
break;
default:
break;
}
}
/* Memory Data size equal to Half-Word */
else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
{
switch (tmp)
{
case DMA_FIFO_THRESHOLD_1QUARTERFULL:
case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
status = HAL_ERROR;
break;
case DMA_FIFO_THRESHOLD_HALFFULL:
if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
{
status = HAL_ERROR;
}
break;
case DMA_FIFO_THRESHOLD_FULL:
if (hdma->Init.MemBurst == DMA_MBURST_INC16)
{
status = HAL_ERROR;
}
break;
default:
break;
}
}
/* Memory Data size equal to Word */
else
{
switch (tmp)
{
case DMA_FIFO_THRESHOLD_1QUARTERFULL:
case DMA_FIFO_THRESHOLD_HALFFULL:
case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
status = HAL_ERROR;
break;
case DMA_FIFO_THRESHOLD_FULL:
if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
{
status = HAL_ERROR;
}
break;
default:
break;
}
}
return status;
}
/**
* @}
*/
#endif /* HAL_DMA_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_dma_ex.c
* @author MCD Application Team
* @brief DMA Extension HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the DMA Extension peripheral:
* + Extended features functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The DMA Extension HAL driver can be used as follows:
(#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
-@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
-@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default.
-@- In Multi (Double) buffer mode, it is possible to update the base address for
the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup DMAEx DMAEx
* @brief DMA Extended HAL module driver
* @{
*/
#ifdef HAL_DMA_MODULE_ENABLED
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private Constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @addtogroup DMAEx_Private_Functions
* @{
*/
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
/**
* @}
*/
/* Exported functions ---------------------------------------------------------*/
/** @addtogroup DMAEx_Exported_Functions
* @{
*/
/** @addtogroup DMAEx_Exported_Functions_Group1
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure the source, destination address and data length and
Start MultiBuffer DMA transfer
(+) Configure the source, destination address and data length and
Start MultiBuffer DMA transfer with interrupt
(+) Change on the fly the memory0 or memory1 address.
@endverbatim
* @{
*/
/**
* @brief Starts the multi_buffer DMA Transfer.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress The source memory Buffer address
* @param DstAddress The destination memory Buffer address
* @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
* @param DataLength The length of data to be transferred from source to destination
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
/* Memory-to-memory transfer not supported in double buffering mode */
if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
{
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
status = HAL_ERROR;
}
else
{
/* Process Locked */
__HAL_LOCK(hdma);
if(HAL_DMA_STATE_READY == hdma->State)
{
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
/* Enable the double buffer mode */
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
/* Configure DMA Stream destination address */
hdma->Instance->M1AR = SecondMemAddress;
/* Configure the source, destination address and the data length */
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
/* Enable the peripheral */
__HAL_DMA_ENABLE(hdma);
}
else
{
/* Return error status */
status = HAL_BUSY;
}
}
return status;
}
/**
* @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress The source memory Buffer address
* @param DstAddress The destination memory Buffer address
* @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
* @param DataLength The length of data to be transferred from source to destination
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
/* Memory-to-memory transfer not supported in double buffering mode */
if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
{
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
return HAL_ERROR;
}
/* Check callback functions */
if ((NULL == hdma->XferCpltCallback) || (NULL == hdma->XferM1CpltCallback) || (NULL == hdma->XferErrorCallback))
{
hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
return HAL_ERROR;
}
/* Process locked */
__HAL_LOCK(hdma);
if(HAL_DMA_STATE_READY == hdma->State)
{
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
/* Initialize the error code */
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
/* Enable the Double buffer mode */
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
/* Configure DMA Stream destination address */
hdma->Instance->M1AR = SecondMemAddress;
/* Configure the source, destination address and the data length */
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
/* Clear all flags */
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
/* Enable Common interrupts*/
hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
hdma->Instance->FCR |= DMA_IT_FE;
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
{
hdma->Instance->CR |= DMA_IT_HT;
}
/* Enable the peripheral */
__HAL_DMA_ENABLE(hdma);
}
else
{
/* Process unlocked */
__HAL_UNLOCK(hdma);
/* Return error status */
status = HAL_BUSY;
}
return status;
}
/**
* @brief Change the memory0 or memory1 address on the fly.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param Address The new address
* @param memory the memory to be changed, This parameter can be one of
* the following values:
* MEMORY0 /
* MEMORY1
* @note The MEMORY0 address can be changed only when the current transfer use
* MEMORY1 and the MEMORY1 address can be changed only when the current
* transfer use MEMORY0.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
{
if(memory == MEMORY0)
{
/* change the memory0 address */
hdma->Instance->M0AR = Address;
}
else
{
/* change the memory1 address */
hdma->Instance->M1AR = Address;
}
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
/** @addtogroup DMAEx_Private_Functions
* @{
*/
/**
* @brief Set the DMA Transfer parameter.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress The source memory Buffer address
* @param DstAddress The destination memory Buffer address
* @param DataLength The length of data to be transferred from source to destination
* @retval HAL status
*/
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
{
/* Configure DMA Stream data length */
hdma->Instance->NDTR = DataLength;
/* Peripheral to Memory */
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
{
/* Configure DMA Stream destination address */
hdma->Instance->PAR = DstAddress;
/* Configure DMA Stream source address */
hdma->Instance->M0AR = SrcAddress;
}
/* Memory to Peripheral */
else
{
/* Configure DMA Stream source address */
hdma->Instance->PAR = SrcAddress;
/* Configure DMA Stream destination address */
hdma->Instance->M0AR = DstAddress;
}
}
/**
* @}
*/
#endif /* HAL_DMA_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_flash.c
* @author MCD Application Team
* @brief FLASH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the internal FLASH memory:
* + Program operations functions
* + Memory Control functions
* + Peripheral Errors functions
*
@verbatim
==============================================================================
##### FLASH peripheral features #####
==============================================================================
[..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
to the Flash memory. It implements the erase and program Flash memory operations
and the read and write protection mechanisms.
[..] The Flash memory interface accelerates code execution with a system of instruction
prefetch and cache lines.
[..] The FLASH main features are:
(+) Flash memory read operations
(+) Flash memory program/erase operations
(+) Read / write protections
(+) Prefetch on I-Code
(+) 64 cache lines of 128 bits on I-Code
(+) 8 cache lines of 128 bits on D-Code
##### How to use this driver #####
==============================================================================
[..]
This driver provides functions and macros to configure and program the FLASH
memory of all STM32F4xx devices.
(#) FLASH Memory IO Programming functions:
(++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
HAL_FLASH_Lock() functions
(++) Program functions: byte, half word, word and double word
(++) There Two modes of programming :
(+++) Polling mode using HAL_FLASH_Program() function
(+++) Interrupt mode using HAL_FLASH_Program_IT() function
(#) Interrupts and flags management functions :
(++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
(++) Wait for last FLASH operation according to its status
(++) Get error flag status by calling HAL_SetErrorCode()
[..]
In addition to these functions, this driver includes a set of macros allowing
to handle the following operations:
(+) Set the latency
(+) Enable/Disable the prefetch buffer
(+) Enable/Disable the Instruction cache and the Data cache
(+) Reset the Instruction cache and the Data cache
(+) Enable/Disable the FLASH interrupts
(+) Monitor the FLASH flags status
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup FLASH FLASH
* @brief FLASH HAL module driver
* @{
*/
#ifdef HAL_FLASH_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup FLASH_Private_Constants
* @{
*/
#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup FLASH_Private_Variables
* @{
*/
/* Variable used for Erase sectors under interruption */
FLASH_ProcessTypeDef pFlash;
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup FLASH_Private_Functions
* @{
*/
/* Program operations */
static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
static void FLASH_Program_Word(uint32_t Address, uint32_t Data);
static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
static void FLASH_Program_Byte(uint32_t Address, uint8_t Data);
static void FLASH_SetErrorCode(void);
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
* @{
*/
/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
* @brief Programming operation functions
*
@verbatim
===============================================================================
##### Programming operation functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to manage the FLASH
program operations.
@endverbatim
* @{
*/
/**
* @brief Program byte, halfword, word or double word at a specified address
* @param TypeProgram Indicate the way to program at a specified address.
* This parameter can be a value of @ref FLASH_Type_Program
* @param Address specifies the address to be programmed.
* @param Data specifies the data to be programmed
*
* @retval HAL_StatusTypeDef HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
{
HAL_StatusTypeDef status = HAL_ERROR;
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Check the parameters */
assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
{
/*Program byte (8-bit) at a specified address.*/
FLASH_Program_Byte(Address, (uint8_t) Data);
}
else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
{
/*Program halfword (16-bit) at a specified address.*/
FLASH_Program_HalfWord(Address, (uint16_t) Data);
}
else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
{
/*Program word (32-bit) at a specified address.*/
FLASH_Program_Word(Address, (uint32_t) Data);
}
else
{
/*Program double word (64-bit) at a specified address.*/
FLASH_Program_DoubleWord(Address, Data);
}
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
/* If the program operation is completed, disable the PG Bit */
FLASH->CR &= (~FLASH_CR_PG);
}
/* Process Unlocked */
__HAL_UNLOCK(&pFlash);
return status;
}
/**
* @brief Program byte, halfword, word or double word at a specified address with interrupt enabled.
* @param TypeProgram Indicate the way to program at a specified address.
* This parameter can be a value of @ref FLASH_Type_Program
* @param Address specifies the address to be programmed.
* @param Data specifies the data to be programmed
*
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
{
HAL_StatusTypeDef status = HAL_OK;
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Check the parameters */
assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
/* Enable End of FLASH Operation interrupt */
__HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
/* Enable Error source interrupt */
__HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
pFlash.Address = Address;
if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
{
/*Program byte (8-bit) at a specified address.*/
FLASH_Program_Byte(Address, (uint8_t) Data);
}
else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
{
/*Program halfword (16-bit) at a specified address.*/
FLASH_Program_HalfWord(Address, (uint16_t) Data);
}
else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
{
/*Program word (32-bit) at a specified address.*/
FLASH_Program_Word(Address, (uint32_t) Data);
}
else
{
/*Program double word (64-bit) at a specified address.*/
FLASH_Program_DoubleWord(Address, Data);
}
return status;
}
/**
* @brief This function handles FLASH interrupt request.
* @retval None
*/
void HAL_FLASH_IRQHandler(void)
{
uint32_t addresstmp = 0U;
/* Check FLASH operation error flags */
#if defined(FLASH_SR_RDERR)
if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
#else
if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
#endif /* FLASH_SR_RDERR */
{
if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
{
/*return the faulty sector*/
addresstmp = pFlash.Sector;
pFlash.Sector = 0xFFFFFFFFU;
}
else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
{
/*return the faulty bank*/
addresstmp = pFlash.Bank;
}
else
{
/*return the faulty address*/
addresstmp = pFlash.Address;
}
/*Save the Error code*/
FLASH_SetErrorCode();
/* FLASH error interrupt user callback */
HAL_FLASH_OperationErrorCallback(addresstmp);
/*Stop the procedure ongoing*/
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
}
/* Check FLASH End of Operation flag */
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
{
/* Clear FLASH End of Operation pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
{
/*Nb of sector to erased can be decreased*/
pFlash.NbSectorsToErase--;
/* Check if there are still sectors to erase*/
if(pFlash.NbSectorsToErase != 0U)
{
addresstmp = pFlash.Sector;
/*Indicate user which sector has been erased*/
HAL_FLASH_EndOfOperationCallback(addresstmp);
/*Increment sector number*/
pFlash.Sector++;
addresstmp = pFlash.Sector;
FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase);
}
else
{
/*No more sectors to Erase, user callback can be called.*/
/*Reset Sector and stop Erase sectors procedure*/
pFlash.Sector = addresstmp = 0xFFFFFFFFU;
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
/* Flush the caches to be sure of the data consistency */
FLASH_FlushCaches() ;
/* FLASH EOP interrupt user callback */
HAL_FLASH_EndOfOperationCallback(addresstmp);
}
}
else
{
if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
{
/* MassErase ended. Return the selected bank */
/* Flush the caches to be sure of the data consistency */
FLASH_FlushCaches() ;
/* FLASH EOP interrupt user callback */
HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
}
else
{
/*Program ended. Return the selected address*/
/* FLASH EOP interrupt user callback */
HAL_FLASH_EndOfOperationCallback(pFlash.Address);
}
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
}
}
if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
{
/* Operation is completed, disable the PG, SER, SNB and MER Bits */
CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT));
/* Disable End of FLASH Operation interrupt */
__HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
/* Disable Error source interrupt */
__HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
/* Process Unlocked */
__HAL_UNLOCK(&pFlash);
}
}
/**
* @brief FLASH end of operation interrupt callback
* @param ReturnValue The value saved in this parameter depends on the ongoing procedure
* Mass Erase: Bank number which has been requested to erase
* Sectors Erase: Sector which has been erased
* (if 0xFFFFFFFFU, it means that all the selected sectors have been erased)
* Program: Address which was selected for data program
* @retval None
*/
__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(ReturnValue);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
*/
}
/**
* @brief FLASH operation error interrupt callback
* @param ReturnValue The value saved in this parameter depends on the ongoing procedure
* Mass Erase: Bank number which has been requested to erase
* Sectors Erase: Sector number which returned an error
* Program: Address which was selected for data program
* @retval None
*/
__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(ReturnValue);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_FLASH_OperationErrorCallback could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
* @brief management functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to control the FLASH
memory operations.
@endverbatim
* @{
*/
/**
* @brief Unlock the FLASH control register access
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_Unlock(void)
{
HAL_StatusTypeDef status = HAL_OK;
if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
{
/* Authorize the FLASH Registers access */
WRITE_REG(FLASH->KEYR, FLASH_KEY1);
WRITE_REG(FLASH->KEYR, FLASH_KEY2);
/* Verify Flash is unlocked */
if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
{
status = HAL_ERROR;
}
}
return status;
}
/**
* @brief Locks the FLASH control register access
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_Lock(void)
{
/* Set the LOCK Bit to lock the FLASH Registers access */
FLASH->CR |= FLASH_CR_LOCK;
return HAL_OK;
}
/**
* @brief Unlock the FLASH Option Control Registers access.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
{
if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
{
/* Authorizes the Option Byte register programming */
FLASH->OPTKEYR = FLASH_OPT_KEY1;
FLASH->OPTKEYR = FLASH_OPT_KEY2;
}
else
{
return HAL_ERROR;
}
return HAL_OK;
}
/**
* @brief Lock the FLASH Option Control Registers access.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
{
/* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
return HAL_OK;
}
/**
* @brief Launch the option byte loading.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
{
/* Set the OPTSTRT bit in OPTCR register */
*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT;
/* Wait for last operation to be completed */
return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE));
}
/**
* @}
*/
/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
* @brief Peripheral Errors functions
*
@verbatim
===============================================================================
##### Peripheral Errors functions #####
===============================================================================
[..]
This subsection permits to get in run-time Errors of the FLASH peripheral.
@endverbatim
* @{
*/
/**
* @brief Get the specific FLASH error flag.
* @retval FLASH_ErrorCode: The returned value can be a combination of:
* @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
* @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag
* @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag
* @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
* @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
* @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag
*/
uint32_t HAL_FLASH_GetError(void)
{
return pFlash.ErrorCode;
}
/**
* @}
*/
/**
* @brief Wait for a FLASH operation to complete.
* @param Timeout maximum flash operationtimeout
* @retval HAL Status
*/
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
{
uint32_t tickstart = 0U;
/* Clear Error Code */
pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
/* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
Even if the FLASH operation fails, the BUSY flag will be reset and an error
flag will be set */
/* Get tick */
tickstart = HAL_GetTick();
while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET)
{
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
return HAL_TIMEOUT;
}
}
}
/* Check FLASH End of Operation flag */
if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
{
/* Clear FLASH End of Operation pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
}
#if defined(FLASH_SR_RDERR)
if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
#else
if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
#endif /* FLASH_SR_RDERR */
{
/*Save the error code*/
FLASH_SetErrorCode();
return HAL_ERROR;
}
/* If there is no error flag set */
return HAL_OK;
}
/**
* @brief Program a double word (64-bit) at a specified address.
* @note This function must be used when the device voltage range is from
* 2.7V to 3.6V and Vpp in the range 7V to 9V.
*
* @note If an erase and a program operations are requested simultaneously,
* the erase operation is performed before the program one.
*
* @param Address specifies the address to be programmed.
* @param Data specifies the data to be programmed.
* @retval None
*/
static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
{
/* Check the parameters */
assert_param(IS_FLASH_ADDRESS(Address));
/* If the previous operation is completed, proceed to program the new data */
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
FLASH->CR |= FLASH_CR_PG;
/* Program the double-word */
*(__IO uint32_t*)Address = (uint32_t)Data;
*(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32);
}
/**
* @brief Program word (32-bit) at a specified address.
* @note This function must be used when the device voltage range is from
* 2.7V to 3.6V.
*
* @note If an erase and a program operations are requested simultaneously,
* the erase operation is performed before the program one.
*
* @param Address specifies the address to be programmed.
* @param Data specifies the data to be programmed.
* @retval None
*/
static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
{
/* Check the parameters */
assert_param(IS_FLASH_ADDRESS(Address));
/* If the previous operation is completed, proceed to program the new data */
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
FLASH->CR |= FLASH_PSIZE_WORD;
FLASH->CR |= FLASH_CR_PG;
*(__IO uint32_t*)Address = Data;
}
/**
* @brief Program a half-word (16-bit) at a specified address.
* @note This function must be used when the device voltage range is from
* 2.1V to 3.6V.
*
* @note If an erase and a program operations are requested simultaneously,
* the erase operation is performed before the program one.
*
* @param Address specifies the address to be programmed.
* @param Data specifies the data to be programmed.
* @retval None
*/
static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
{
/* Check the parameters */
assert_param(IS_FLASH_ADDRESS(Address));
/* If the previous operation is completed, proceed to program the new data */
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
FLASH->CR |= FLASH_PSIZE_HALF_WORD;
FLASH->CR |= FLASH_CR_PG;
*(__IO uint16_t*)Address = Data;
}
/**
* @brief Program byte (8-bit) at a specified address.
* @note This function must be used when the device voltage range is from
* 1.8V to 3.6V.
*
* @note If an erase and a program operations are requested simultaneously,
* the erase operation is performed before the program one.
*
* @param Address specifies the address to be programmed.
* @param Data specifies the data to be programmed.
* @retval None
*/
static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
{
/* Check the parameters */
assert_param(IS_FLASH_ADDRESS(Address));
/* If the previous operation is completed, proceed to program the new data */
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
FLASH->CR |= FLASH_PSIZE_BYTE;
FLASH->CR |= FLASH_CR_PG;
*(__IO uint8_t*)Address = Data;
}
/**
* @brief Set the specific FLASH error flag.
* @retval None
*/
static void FLASH_SetErrorCode(void)
{
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
{
pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
/* Clear FLASH write protection error pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR);
}
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
{
pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
/* Clear FLASH Programming alignment error pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR);
}
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
{
pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
/* Clear FLASH Programming parallelism error pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR);
}
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET)
{
pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS;
/* Clear FLASH Programming sequence error pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR);
}
#if defined(FLASH_SR_RDERR)
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
{
pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
/* Clear FLASH Proprietary readout protection error pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR);
}
#endif /* FLASH_SR_RDERR */
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
{
pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
/* Clear FLASH Operation error pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR);
}
}
/**
* @}
*/
#endif /* HAL_FLASH_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_flash_ex.c
* @author MCD Application Team
* @brief Extended FLASH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the FLASH extension peripheral:
* + Extended programming operations functions
*
@verbatim
==============================================================================
##### Flash Extension features #####
==============================================================================
[..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and
STM32F429xx/439xx devices contains the following additional features
(+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write
capability (RWW)
(+) Dual bank memory organization
(+) PCROP protection for all banks
##### How to use this driver #####
==============================================================================
[..] This driver provides functions to configure and program the FLASH memory
of all STM32F427xx/437xx, STM32F429xx/439xx, STM32F469xx/479xx and STM32F446xx
devices. It includes
(#) FLASH Memory Erase functions:
(++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
HAL_FLASH_Lock() functions
(++) Erase function: Erase sector, erase all sectors
(++) There are two modes of erase :
(+++) Polling Mode using HAL_FLASHEx_Erase()
(+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()
(#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to :
(++) Set/Reset the write protection
(++) Set the Read protection Level
(++) Set the BOR level
(++) Program the user Option Bytes
(#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to :
(++) Extended space (bank 2) erase function
(++) Full FLASH space (2 Mo) erase (bank 1 and bank 2)
(++) Dual Boot activation
(++) Write protection configuration for bank 2
(++) PCROP protection configuration and control for both banks
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup FLASHEx FLASHEx
* @brief FLASH HAL Extension module driver
* @{
*/
#ifdef HAL_FLASH_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup FLASHEx_Private_Constants
* @{
*/
#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup FLASHEx_Private_Variables
* @{
*/
extern FLASH_ProcessTypeDef pFlash;
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup FLASHEx_Private_Functions
* @{
*/
/* Option bytes control */
static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks);
static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks);
static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks);
static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level);
static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby);
static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level);
static uint8_t FLASH_OB_GetUser(void);
static uint16_t FLASH_OB_GetWRP(void);
static uint8_t FLASH_OB_GetRDP(void);
static uint8_t FLASH_OB_GetBOR(void);
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\
defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector);
static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector);
#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx
STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks);
static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks);
static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
* @{
*/
/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
* @brief Extended IO operation functions
*
@verbatim
===============================================================================
##### Extended programming operation functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to manage the Extension FLASH
programming operations.
@endverbatim
* @{
*/
/**
* @brief Perform a mass erase or erase the specified FLASH memory sectors
* @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
* contains the configuration information for the erasing.
*
* @param[out] SectorError pointer to variable that
* contains the configuration information on faulty sector in case of error
* (0xFFFFFFFFU means that all the sectors have been correctly erased)
*
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
{
HAL_StatusTypeDef status = HAL_ERROR;
uint32_t index = 0U;
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Check the parameters */
assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
/*Initialization of SectorError variable*/
*SectorError = 0xFFFFFFFFU;
if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
{
/*Mass erase to be done*/
FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
/* if the erase operation is completed, disable the MER Bit */
FLASH->CR &= (~FLASH_MER_BIT);
}
else
{
/* Check the parameters */
assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
/* Erase by sector by sector to be done*/
for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++)
{
FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange);
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
/* If the erase operation is completed, disable the SER and SNB Bits */
CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB));
if(status != HAL_OK)
{
/* In case of error, stop erase procedure and return the faulty sector*/
*SectorError = index;
break;
}
}
}
/* Flush the caches to be sure of the data consistency */
FLASH_FlushCaches();
}
/* Process Unlocked */
__HAL_UNLOCK(&pFlash);
return status;
}
/**
* @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled
* @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
* contains the configuration information for the erasing.
*
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
{
HAL_StatusTypeDef status = HAL_OK;
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Check the parameters */
assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
/* Enable End of FLASH Operation interrupt */
__HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
/* Enable Error source interrupt */
__HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
/* Clear pending flags (if any) */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR);
if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
{
/*Mass erase to be done*/
pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
pFlash.Bank = pEraseInit->Banks;
FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
}
else
{
/* Erase by sector to be done*/
/* Check the parameters */
assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE;
pFlash.NbSectorsToErase = pEraseInit->NbSectors;
pFlash.Sector = pEraseInit->Sector;
pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange;
/*Erase 1st sector and wait for IT*/
FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange);
}
return status;
}
/**
* @brief Program option bytes
* @param pOBInit pointer to an FLASH_OBInitStruct structure that
* contains the configuration information for the programming.
*
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
{
HAL_StatusTypeDef status = HAL_ERROR;
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Check the parameters */
assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
/*Write protection configuration*/
if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
{
assert_param(IS_WRPSTATE(pOBInit->WRPState));
if(pOBInit->WRPState == OB_WRPSTATE_ENABLE)
{
/*Enable of Write protection on the selected Sector*/
status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks);
}
else
{
/*Disable of Write protection on the selected Sector*/
status = FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks);
}
}
/*Read protection configuration*/
if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
{
status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
}
/*USER configuration*/
if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
{
status = FLASH_OB_UserConfig(pOBInit->USERConfig&OB_IWDG_SW,
pOBInit->USERConfig&OB_STOP_NO_RST,
pOBInit->USERConfig&OB_STDBY_NO_RST);
}
/*BOR Level configuration*/
if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR)
{
status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel);
}
/* Process Unlocked */
__HAL_UNLOCK(&pFlash);
return status;
}
/**
* @brief Get the Option byte configuration
* @param pOBInit pointer to an FLASH_OBInitStruct structure that
* contains the configuration information for the programming.
*
* @retval None
*/
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
{
pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR;
/*Get WRP*/
pOBInit->WRPSector = (uint32_t)FLASH_OB_GetWRP();
/*Get RDP Level*/
pOBInit->RDPLevel = (uint32_t)FLASH_OB_GetRDP();
/*Get USER*/
pOBInit->USERConfig = (uint8_t)FLASH_OB_GetUser();
/*Get BOR Level*/
pOBInit->BORLevel = (uint32_t)FLASH_OB_GetBOR();
}
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
/**
* @brief Program option bytes
* @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that
* contains the configuration information for the programming.
*
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
{
HAL_StatusTypeDef status = HAL_ERROR;
/* Check the parameters */
assert_param(IS_OBEX(pAdvOBInit->OptionType));
/*Program PCROP option byte*/
if(((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP)
{
/* Check the parameters */
assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState));
if((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE)
{
/*Enable of Write protection on the selected Sector*/
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
status = FLASH_OB_EnablePCROP(pAdvOBInit->Sectors);
#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
status = FLASH_OB_EnablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks);
#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
STM32F413xx || STM32F423xx */
}
else
{
/*Disable of Write protection on the selected Sector*/
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
status = FLASH_OB_DisablePCROP(pAdvOBInit->Sectors);
#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
status = FLASH_OB_DisablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks);
#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
STM32F413xx || STM32F423xx */
}
}
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
/*Program BOOT config option byte*/
if(((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG)
{
status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig);
}
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
return status;
}
/**
* @brief Get the OBEX byte configuration
* @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that
* contains the configuration information for the programming.
*
* @retval None
*/
void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
{
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
/*Get Sector*/
pAdvOBInit->Sectors = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
/*Get Sector for Bank1*/
pAdvOBInit->SectorsBank1 = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
/*Get Sector for Bank2*/
pAdvOBInit->SectorsBank2 = (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS));
/*Get Boot config OB*/
pAdvOBInit->BootConfig = *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS;
#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
STM32F413xx || STM32F423xx */
}
/**
* @brief Select the Protection Mode
*
* @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted
* Global Read Out Protection modification (from level1 to level0)
* @note Once SPRMOD bit is active unprotection of a protected sector is not possible
* @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag
* @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/
* STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices.
*
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void)
{
uint8_t optiontmp = 0xFF;
/* Mask SPRMOD bit */
optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F);
/* Update Option Byte */
*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp);
return HAL_OK;
}
/**
* @brief Deselect the Protection Mode
*
* @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted
* Global Read Out Protection modification (from level1 to level0)
* @note Once SPRMOD bit is active unprotection of a protected sector is not possible
* @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag
* @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/
* STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices.
*
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void)
{
uint8_t optiontmp = 0xFF;
/* Mask SPRMOD bit */
optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F);
/* Update Option Byte */
*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp);
return HAL_OK;
}
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx ||\
STM32F411xE || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
/**
* @brief Returns the FLASH Write Protection Option Bytes value for Bank 2
* @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx devices.
* @retval The FLASH Write Protection Option Bytes value
*/
uint16_t HAL_FLASHEx_OB_GetBank2WRP(void)
{
/* Return the FLASH write protection Register value */
return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS));
}
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
/**
* @brief Full erase of FLASH memory sectors
* @param VoltageRange The device voltage range which defines the erase parallelism.
* This parameter can be one of the following values:
* @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
* the operation will be done by byte (8-bit)
* @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
* the operation will be done by half word (16-bit)
* @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
* the operation will be done by word (32-bit)
* @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
* the operation will be done by double word (64-bit)
*
* @param Banks Banks to be erased
* This parameter can be one of the following values:
* @arg FLASH_BANK_1: Bank1 to be erased
* @arg FLASH_BANK_2: Bank2 to be erased
* @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
*
* @retval HAL Status
*/
static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
{
/* Check the parameters */
assert_param(IS_VOLTAGERANGE(VoltageRange));
assert_param(IS_FLASH_BANK(Banks));
/* if the previous operation is completed, proceed to erase all sectors */
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
if(Banks == FLASH_BANK_BOTH)
{
/* bank1 & bank2 will be erased*/
FLASH->CR |= FLASH_MER_BIT;
}
else if(Banks == FLASH_BANK_1)
{
/*Only bank1 will be erased*/
FLASH->CR |= FLASH_CR_MER1;
}
else
{
/*Only bank2 will be erased*/
FLASH->CR |= FLASH_CR_MER2;
}
FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8U);
}
/**
* @brief Erase the specified FLASH memory sector
* @param Sector FLASH sector to erase
* The value of this parameter depend on device used within the same series
* @param VoltageRange The device voltage range which defines the erase parallelism.
* This parameter can be one of the following values:
* @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
* the operation will be done by byte (8-bit)
* @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
* the operation will be done by half word (16-bit)
* @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
* the operation will be done by word (32-bit)
* @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
* the operation will be done by double word (64-bit)
*
* @retval None
*/
void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
{
uint32_t tmp_psize = 0U;
/* Check the parameters */
assert_param(IS_FLASH_SECTOR(Sector));
assert_param(IS_VOLTAGERANGE(VoltageRange));
if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
{
tmp_psize = FLASH_PSIZE_BYTE;
}
else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
{
tmp_psize = FLASH_PSIZE_HALF_WORD;
}
else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
{
tmp_psize = FLASH_PSIZE_WORD;
}
else
{
tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
}
/* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */
if(Sector > FLASH_SECTOR_11)
{
Sector += 4U;
}
/* If the previous operation is completed, proceed to erase the sector */
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
FLASH->CR |= tmp_psize;
CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos);
FLASH->CR |= FLASH_CR_STRT;
}
/**
* @brief Enable the write protection of the desired bank1 or bank 2 sectors
*
* @note When the memory read protection level is selected (RDP level = 1),
* it is not possible to program or erase the flash sector i if CortexM4
* debug features are connected or boot code is executed in RAM, even if nWRPi = 1
* @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
*
* @param WRPSector specifies the sector(s) to be write protected.
* This parameter can be one of the following values:
* @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23
* @arg OB_WRP_SECTOR_All
* @note BANK2 starts from OB_WRP_SECTOR_12
*
* @param Banks Enable write protection on all the sectors for the specific bank
* This parameter can be one of the following values:
* @arg FLASH_BANK_1: WRP on all sectors of bank1
* @arg FLASH_BANK_2: WRP on all sectors of bank2
* @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
*
* @retval HAL FLASH State
*/
static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_WRP_SECTOR(WRPSector));
assert_param(IS_FLASH_BANK(Banks));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) ||
(WRPSector < OB_WRP_SECTOR_12))
{
if(WRPSector == OB_WRP_SECTOR_All)
{
/*Write protection on all sector of BANK1*/
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~(WRPSector>>12));
}
else
{
/*Write protection done on sectors of BANK1*/
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector);
}
}
else
{
/*Write protection done on sectors of BANK2*/
*(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12));
}
/*Write protection on all sector of BANK2*/
if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH))
{
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
*(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12));
}
}
}
return status;
}
/**
* @brief Disable the write protection of the desired bank1 or bank 2 sectors
*
* @note When the memory read protection level is selected (RDP level = 1),
* it is not possible to program or erase the flash sector i if CortexM4
* debug features are connected or boot code is executed in RAM, even if nWRPi = 1
* @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
*
* @param WRPSector specifies the sector(s) to be write protected.
* This parameter can be one of the following values:
* @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23
* @arg OB_WRP_Sector_All
* @note BANK2 starts from OB_WRP_SECTOR_12
*
* @param Banks Disable write protection on all the sectors for the specific bank
* This parameter can be one of the following values:
* @arg FLASH_BANK_1: Bank1 to be erased
* @arg FLASH_BANK_2: Bank2 to be erased
* @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
*
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_WRP_SECTOR(WRPSector));
assert_param(IS_FLASH_BANK(Banks));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) ||
(WRPSector < OB_WRP_SECTOR_12))
{
if(WRPSector == OB_WRP_SECTOR_All)
{
/*Write protection on all sector of BANK1*/
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
}
else
{
/*Write protection done on sectors of BANK1*/
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector;
}
}
else
{
/*Write protection done on sectors of BANK2*/
*(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
}
/*Write protection on all sector of BANK2*/
if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH))
{
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
*(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
}
}
}
return status;
}
/**
* @brief Configure the Dual Bank Boot.
*
* @note This function can be used only for STM32F42xxx/43xxx devices.
*
* @param BootConfig specifies the Dual Bank Boot Option byte.
* This parameter can be one of the following values:
* @arg OB_Dual_BootEnabled: Dual Bank Boot Enable
* @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled
* @retval None
*/
static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_BOOT(BootConfig));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
/* Set Dual Bank Boot */
*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2);
*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig;
}
return status;
}
/**
* @brief Enable the read/write protection (PCROP) of the desired
* sectors of Bank 1 and/or Bank 2.
* @note This function can be used only for STM32F42xxx/43xxx devices.
* @param SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1.
* This parameter can be one of the following values:
* @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11
* @arg OB_PCROP_SECTOR__All
* @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2.
* This parameter can be one of the following values:
* @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23
* @arg OB_PCROP_SECTOR__All
* @param Banks Enable PCROP protection on all the sectors for the specific bank
* This parameter can be one of the following values:
* @arg FLASH_BANK_1: WRP on all sectors of bank1
* @arg FLASH_BANK_2: WRP on all sectors of bank2
* @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
*
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
{
HAL_StatusTypeDef status = HAL_OK;
assert_param(IS_FLASH_BANK(Banks));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))
{
assert_param(IS_OB_PCROP(SectorBank1));
/*Write protection done on sectors of BANK1*/
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1;
}
else
{
assert_param(IS_OB_PCROP(SectorBank2));
/*Write protection done on sectors of BANK2*/
*(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2;
}
/*Write protection on all sector of BANK2*/
if(Banks == FLASH_BANK_BOTH)
{
assert_param(IS_OB_PCROP(SectorBank2));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
/*Write protection done on sectors of BANK2*/
*(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2;
}
}
}
return status;
}
/**
* @brief Disable the read/write protection (PCROP) of the desired
* sectors of Bank 1 and/or Bank 2.
* @note This function can be used only for STM32F42xxx/43xxx devices.
* @param SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1.
* This parameter can be one of the following values:
* @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11
* @arg OB_PCROP_SECTOR__All
* @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2.
* This parameter can be one of the following values:
* @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23
* @arg OB_PCROP_SECTOR__All
* @param Banks Disable PCROP protection on all the sectors for the specific bank
* This parameter can be one of the following values:
* @arg FLASH_BANK_1: WRP on all sectors of bank1
* @arg FLASH_BANK_2: WRP on all sectors of bank2
* @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
*
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_FLASH_BANK(Banks));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))
{
assert_param(IS_OB_PCROP(SectorBank1));
/*Write protection done on sectors of BANK1*/
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~SectorBank1);
}
else
{
/*Write protection done on sectors of BANK2*/
assert_param(IS_OB_PCROP(SectorBank2));
*(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2);
}
/*Write protection on all sector of BANK2*/
if(Banks == FLASH_BANK_BOTH)
{
assert_param(IS_OB_PCROP(SectorBank2));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
/*Write protection done on sectors of BANK2*/
*(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2);
}
}
}
return status;
}
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
defined(STM32F423xx)
/**
* @brief Mass erase of FLASH memory
* @param VoltageRange The device voltage range which defines the erase parallelism.
* This parameter can be one of the following values:
* @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
* the operation will be done by byte (8-bit)
* @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
* the operation will be done by half word (16-bit)
* @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
* the operation will be done by word (32-bit)
* @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
* the operation will be done by double word (64-bit)
*
* @param Banks Banks to be erased
* This parameter can be one of the following values:
* @arg FLASH_BANK_1: Bank1 to be erased
*
* @retval None
*/
static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
{
/* Check the parameters */
assert_param(IS_VOLTAGERANGE(VoltageRange));
assert_param(IS_FLASH_BANK(Banks));
/* If the previous operation is completed, proceed to erase all sectors */
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
FLASH->CR |= FLASH_CR_MER;
FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8U);
}
/**
* @brief Erase the specified FLASH memory sector
* @param Sector FLASH sector to erase
* The value of this parameter depend on device used within the same series
* @param VoltageRange The device voltage range which defines the erase parallelism.
* This parameter can be one of the following values:
* @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
* the operation will be done by byte (8-bit)
* @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
* the operation will be done by half word (16-bit)
* @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
* the operation will be done by word (32-bit)
* @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
* the operation will be done by double word (64-bit)
*
* @retval None
*/
void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
{
uint32_t tmp_psize = 0U;
/* Check the parameters */
assert_param(IS_FLASH_SECTOR(Sector));
assert_param(IS_VOLTAGERANGE(VoltageRange));
if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
{
tmp_psize = FLASH_PSIZE_BYTE;
}
else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
{
tmp_psize = FLASH_PSIZE_HALF_WORD;
}
else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
{
tmp_psize = FLASH_PSIZE_WORD;
}
else
{
tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
}
/* If the previous operation is completed, proceed to erase the sector */
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
FLASH->CR |= tmp_psize;
CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos);
FLASH->CR |= FLASH_CR_STRT;
}
/**
* @brief Enable the write protection of the desired bank 1 sectors
*
* @note When the memory read protection level is selected (RDP level = 1),
* it is not possible to program or erase the flash sector i if CortexM4
* debug features are connected or boot code is executed in RAM, even if nWRPi = 1
* @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
*
* @param WRPSector specifies the sector(s) to be write protected.
* The value of this parameter depend on device used within the same series
*
* @param Banks Enable write protection on all the sectors for the specific bank
* This parameter can be one of the following values:
* @arg FLASH_BANK_1: WRP on all sectors of bank1
*
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_WRP_SECTOR(WRPSector));
assert_param(IS_FLASH_BANK(Banks));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector);
}
return status;
}
/**
* @brief Disable the write protection of the desired bank 1 sectors
*
* @note When the memory read protection level is selected (RDP level = 1),
* it is not possible to program or erase the flash sector i if CortexM4
* debug features are connected or boot code is executed in RAM, even if nWRPi = 1
* @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
*
* @param WRPSector specifies the sector(s) to be write protected.
* The value of this parameter depend on device used within the same series
*
* @param Banks Enable write protection on all the sectors for the specific bank
* This parameter can be one of the following values:
* @arg FLASH_BANK_1: WRP on all sectors of bank1
*
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_WRP_SECTOR(WRPSector));
assert_param(IS_FLASH_BANK(Banks));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector;
}
return status;
}
#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx
STM32F413xx || STM32F423xx */
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
/**
* @brief Enable the read/write protection (PCROP) of the desired sectors.
* @note This function can be used only for STM32F401xx devices.
* @param Sector specifies the sector(s) to be read/write protected or unprotected.
* This parameter can be one of the following values:
* @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
* @arg OB_PCROP_Sector_All
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_PCROP(Sector));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector;
}
return status;
}
/**
* @brief Disable the read/write protection (PCROP) of the desired sectors.
* @note This function can be used only for STM32F401xx devices.
* @param Sector specifies the sector(s) to be read/write protected or unprotected.
* This parameter can be one of the following values:
* @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
* @arg OB_PCROP_Sector_All
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_PCROP(Sector));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
*(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~Sector);
}
return status;
}
#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx
STM32F413xx || STM32F423xx */
/**
* @brief Set the read protection level.
* @param Level specifies the read protection level.
* This parameter can be one of the following values:
* @arg OB_RDP_LEVEL_0: No protection
* @arg OB_RDP_LEVEL_1: Read protection of the memory
* @arg OB_RDP_LEVEL_2: Full chip protection
*
* @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
*
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_RDP_LEVEL(Level));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
*(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level;
}
return status;
}
/**
* @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
* @param Iwdg Selects the IWDG mode
* This parameter can be one of the following values:
* @arg OB_IWDG_SW: Software IWDG selected
* @arg OB_IWDG_HW: Hardware IWDG selected
* @param Stop Reset event when entering STOP mode.
* This parameter can be one of the following values:
* @arg OB_STOP_NO_RST: No reset generated when entering in STOP
* @arg OB_STOP_RST: Reset generated when entering in STOP
* @param Stdby Reset event when entering Standby mode.
* This parameter can be one of the following values:
* @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
* @arg OB_STDBY_RST: Reset generated when entering in STANDBY
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby)
{
uint8_t optiontmp = 0xFF;
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_IWDG_SOURCE(Iwdg));
assert_param(IS_OB_STOP_SOURCE(Stop));
assert_param(IS_OB_STDBY_SOURCE(Stdby));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
if(status == HAL_OK)
{
/* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */
optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F);
/* Update User Option Byte */
*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp)));
}
return status;
}
/**
* @brief Set the BOR Level.
* @param Level specifies the Option Bytes BOR Reset Level.
* This parameter can be one of the following values:
* @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
* @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
* @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
* @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V
* @retval HAL Status
*/
static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level)
{
/* Check the parameters */
assert_param(IS_OB_BOR_LEVEL(Level));
/* Set the BOR Level */
*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV);
*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level;
return HAL_OK;
}
/**
* @brief Return the FLASH User Option Byte value.
* @retval uint8_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1)
* and RST_STDBY(Bit2).
*/
static uint8_t FLASH_OB_GetUser(void)
{
/* Return the User Option Byte */
return ((uint8_t)(FLASH->OPTCR & 0xE0));
}
/**
* @brief Return the FLASH Write Protection Option Bytes value.
* @retval uint16_t FLASH Write Protection Option Bytes value
*/
static uint16_t FLASH_OB_GetWRP(void)
{
/* Return the FLASH write protection Register value */
return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
}
/**
* @brief Returns the FLASH Read Protection level.
* @retval FLASH ReadOut Protection Status:
* This parameter can be one of the following values:
* @arg OB_RDP_LEVEL_0: No protection
* @arg OB_RDP_LEVEL_1: Read protection of the memory
* @arg OB_RDP_LEVEL_2: Full chip protection
*/
static uint8_t FLASH_OB_GetRDP(void)
{
uint8_t readstatus = OB_RDP_LEVEL_0;
if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2))
{
readstatus = OB_RDP_LEVEL_2;
}
else if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_1))
{
readstatus = OB_RDP_LEVEL_1;
}
else
{
readstatus = OB_RDP_LEVEL_0;
}
return readstatus;
}
/**
* @brief Returns the FLASH BOR level.
* @retval uint8_t The FLASH BOR level:
* - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
* - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
* - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
* - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V
*/
static uint8_t FLASH_OB_GetBOR(void)
{
/* Return the FLASH BOR level */
return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C);
}
/**
* @brief Flush the instruction and data caches
* @retval None
*/
void FLASH_FlushCaches(void)
{
/* Flush instruction cache */
if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN)!= RESET)
{
/* Disable instruction cache */
__HAL_FLASH_INSTRUCTION_CACHE_DISABLE();
/* Reset instruction cache */
__HAL_FLASH_INSTRUCTION_CACHE_RESET();
/* Enable instruction cache */
__HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
}
/* Flush data cache */
if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != RESET)
{
/* Disable data cache */
__HAL_FLASH_DATA_CACHE_DISABLE();
/* Reset data cache */
__HAL_FLASH_DATA_CACHE_RESET();
/* Enable data cache */
__HAL_FLASH_DATA_CACHE_ENABLE();
}
}
/**
* @}
*/
#endif /* HAL_FLASH_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_flash_ramfunc.c
* @author MCD Application Team
* @brief FLASH RAMFUNC module driver.
* This file provides a FLASH firmware functions which should be
* executed from internal SRAM
* + Stop/Start the flash interface while System Run
* + Enable/Disable the flash sleep while System Run
@verbatim
==============================================================================
##### APIs executed from Internal RAM #####
==============================================================================
[..]
*** ARM Compiler ***
--------------------
[..] RAM functions are defined using the toolchain options.
Functions that are be executed in RAM should reside in a separate
source module. Using the 'Options for File' dialog you can simply change
the 'Code / Const' area of a module to a memory space in physical RAM.
Available memory areas are declared in the 'Target' tab of the
Options for Target' dialog.
*** ICCARM Compiler ***
-----------------------
[..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
*** GNU Compiler ***
--------------------
[..] RAM functions are defined using a specific toolchain attribute
"__attribute__((section(".RamFunc")))".
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup FLASH_RAMFUNC FLASH RAMFUNC
* @brief FLASH functions executed from RAM
* @{
*/
#ifdef HAL_FLASH_MODULE_ENABLED
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
defined(STM32F412Rx) || defined(STM32F412Cx)
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions
* @{
*/
/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM
* @brief Peripheral Extended features functions
*
@verbatim
===============================================================================
##### ramfunc functions #####
===============================================================================
[..]
This subsection provides a set of functions that should be executed from RAM
transfers.
@endverbatim
* @{
*/
/**
* @brief Stop the flash interface while System Run
* @note This mode is only available for STM32F41xxx/STM32F446xx devices.
* @note This mode couldn't be set while executing with the flash itself.
* It should be done with specific routine executed from RAM.
* @retval None
*/
__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void)
{
/* Enable Power ctrl clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Stop the flash interface while System Run */
SET_BIT(PWR->CR, PWR_CR_FISSR);
return HAL_OK;
}
/**
* @brief Start the flash interface while System Run
* @note This mode is only available for STM32F411xx/STM32F446xx devices.
* @note This mode couldn't be set while executing with the flash itself.
* It should be done with specific routine executed from RAM.
* @retval None
*/
__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void)
{
/* Enable Power ctrl clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Start the flash interface while System Run */
CLEAR_BIT(PWR->CR, PWR_CR_FISSR);
return HAL_OK;
}
/**
* @brief Enable the flash sleep while System Run
* @note This mode is only available for STM32F41xxx/STM32F446xx devices.
* @note This mode could n't be set while executing with the flash itself.
* It should be done with specific routine executed from RAM.
* @retval None
*/
__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void)
{
/* Enable Power ctrl clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Enable the flash sleep while System Run */
SET_BIT(PWR->CR, PWR_CR_FMSSR);
return HAL_OK;
}
/**
* @brief Disable the flash sleep while System Run
* @note This mode is only available for STM32F41xxx/STM32F446xx devices.
* @note This mode couldn't be set while executing with the flash itself.
* It should be done with specific routine executed from RAM.
* @retval None
*/
__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void)
{
/* Enable Power ctrl clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Disable the flash sleep while System Run */
CLEAR_BIT(PWR->CR, PWR_CR_FMSSR);
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
#endif /* HAL_FLASH_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_gpio.c
* @author MCD Application Team
* @brief GPIO HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the General Purpose Input/Output (GPIO) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
*
@verbatim
==============================================================================
##### GPIO Peripheral features #####
==============================================================================
[..]
Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
in several modes:
(+) Input mode
(+) Analog mode
(+) Output mode
(+) Alternate function mode
(+) External interrupt/event lines
[..]
During and just after reset, the alternate functions and external interrupt
lines are not active and the I/O ports are configured in input floating mode.
[..]
All GPIO pins have weak internal pull-up and pull-down resistors, which can be
activated or not.
[..]
In Output or Alternate mode, each IO can be configured on open-drain or push-pull
type and the IO speed can be selected depending on the VDD value.
[..]
All ports have external interrupt/event capability. To use external interrupt
lines, the port must be configured in input mode. All available GPIO pins are
connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
[..]
The external interrupt/event controller consists of up to 23 edge detectors
(16 lines are connected to GPIO) for generating event/interrupt requests (each
input line can be independently configured to select the type (interrupt or event)
and the corresponding trigger event (rising or falling or both). Each line can
also be masked independently.
##### How to use this driver #####
==============================================================================
[..]
(#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
(#) Configure the GPIO pin(s) using HAL_GPIO_Init().
(++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
(++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
structure.
(++) In case of Output or alternate function mode selection: the speed is
configured through "Speed" member from GPIO_InitTypeDef structure.
(++) In alternate mode is selection, the alternate function connected to the IO
is configured through "Alternate" member from GPIO_InitTypeDef structure.
(++) Analog mode is required when a pin is to be used as ADC channel
or DAC output.
(++) In case of external interrupt/event selection the "Mode" member from
GPIO_InitTypeDef structure select the type (interrupt or event) and
the corresponding trigger event (rising or falling or both).
(#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
HAL_NVIC_EnableIRQ().
(#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
(#) To set/reset the level of a pin configured in output mode use
HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
(#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
(#) During and just after reset, the alternate functions are not
active and the GPIO pins are configured in input floating mode (except JTAG
pins).
(#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
(PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
priority over the GPIO function.
(#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
The HSE has priority over the GPIO function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup GPIO GPIO
* @brief GPIO HAL module driver
* @{
*/
#ifdef HAL_GPIO_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup GPIO_Private_Constants GPIO Private Constants
* @{
*/
#define GPIO_MODE 0x00000003U
#define EXTI_MODE 0x10000000U
#define GPIO_MODE_IT 0x00010000U
#define GPIO_MODE_EVT 0x00020000U
#define RISING_EDGE 0x00100000U
#define FALLING_EDGE 0x00200000U
#define GPIO_OUTPUT_TYPE 0x00000010U
#define GPIO_NUMBER 16U
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
* @{
*/
/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..]
This section provides functions allowing to initialize and de-initialize the GPIOs
to be ready for use.
@endverbatim
* @{
*/
/**
* @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
* @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
* x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
* @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
* the configuration information for the specified GPIO peripheral.
* @retval None
*/
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
{
uint32_t position;
uint32_t ioposition = 0x00U;
uint32_t iocurrent = 0x00U;
uint32_t temp = 0x00U;
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
/* Configure the port pins */
for(position = 0U; position < GPIO_NUMBER; position++)
{
/* Get the IO position */
ioposition = 0x01U << position;
/* Get the current IO position */
iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
if(iocurrent == ioposition)
{
/*--------------------- GPIO Mode Configuration ------------------------*/
/* In case of Alternate function mode selection */
if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
{
/* Check the Alternate function parameter */
assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
/* Configure Alternate function mapped with the current IO */
temp = GPIOx->AFR[position >> 3U];
temp &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & 0x07U) * 4U));
GPIOx->AFR[position >> 3U] = temp;
}
/* Configure IO Direction mode (Input, Output, Alternate or Analog) */
temp = GPIOx->MODER;
temp &= ~(GPIO_MODER_MODER0 << (position * 2U));
temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U));
GPIOx->MODER = temp;
/* In case of Output or Alternate function mode selection */
if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
(GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
{
/* Check the Speed parameter */
assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
/* Configure the IO Speed */
temp = GPIOx->OSPEEDR;
temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
temp |= (GPIO_Init->Speed << (position * 2U));
GPIOx->OSPEEDR = temp;
/* Configure the IO Output Type */
temp = GPIOx->OTYPER;
temp &= ~(GPIO_OTYPER_OT_0 << position) ;
temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position);
GPIOx->OTYPER = temp;
}
/* Activate the Pull-up or Pull down resistor for the current IO */
temp = GPIOx->PUPDR;
temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
temp |= ((GPIO_Init->Pull) << (position * 2U));
GPIOx->PUPDR = temp;
/*--------------------- EXTI Mode Configuration ------------------------*/
/* Configure the External Interrupt or event for the current IO */
if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
{
/* Enable SYSCFG Clock */
__HAL_RCC_SYSCFG_CLK_ENABLE();
temp = SYSCFG->EXTICR[position >> 2U];
temp &= ~(0x0FU << (4U * (position & 0x03U)));
temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)));
SYSCFG->EXTICR[position >> 2U] = temp;
/* Clear EXTI line configuration */
temp = EXTI->IMR;
temp &= ~((uint32_t)iocurrent);
if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
{
temp |= iocurrent;
}
EXTI->IMR = temp;
temp = EXTI->EMR;
temp &= ~((uint32_t)iocurrent);
if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
{
temp |= iocurrent;
}
EXTI->EMR = temp;
/* Clear Rising Falling edge configuration */
temp = EXTI->RTSR;
temp &= ~((uint32_t)iocurrent);
if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
{
temp |= iocurrent;
}
EXTI->RTSR = temp;
temp = EXTI->FTSR;
temp &= ~((uint32_t)iocurrent);
if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
{
temp |= iocurrent;
}
EXTI->FTSR = temp;
}
}
}
}
/**
* @brief De-initializes the GPIOx peripheral registers to their default reset values.
* @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
* x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
* @param GPIO_Pin specifies the port bit to be written.
* This parameter can be one of GPIO_PIN_x where x can be (0..15).
* @retval None
*/
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
{
uint32_t position;
uint32_t ioposition = 0x00U;
uint32_t iocurrent = 0x00U;
uint32_t tmp = 0x00U;
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
/* Configure the port pins */
for(position = 0U; position < GPIO_NUMBER; position++)
{
/* Get the IO position */
ioposition = 0x01U << position;
/* Get the current IO position */
iocurrent = (GPIO_Pin) & ioposition;
if(iocurrent == ioposition)
{
/*------------------------- GPIO Mode Configuration --------------------*/
/* Configure IO Direction in Input Floating Mode */
GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U));
/* Configure the default Alternate Function in current IO */
GPIOx->AFR[position >> 3U] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
/* Configure the default value for IO Speed */
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
/* Configure the default value IO Output Type */
GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
/* Deactivate the Pull-up and Pull-down resistor for the current IO */
GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
/*------------------------- EXTI Mode Configuration --------------------*/
tmp = SYSCFG->EXTICR[position >> 2U];
tmp &= (0x0FU << (4U * (position & 0x03U)));
if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U))))
{
/* Configure the External Interrupt or event for the current IO */
tmp = 0x0FU << (4U * (position & 0x03U));
SYSCFG->EXTICR[position >> 2U] &= ~tmp;
/* Clear EXTI line configuration */
EXTI->IMR &= ~((uint32_t)iocurrent);
EXTI->EMR &= ~((uint32_t)iocurrent);
/* Clear Rising Falling edge configuration */
EXTI->RTSR &= ~((uint32_t)iocurrent);
EXTI->FTSR &= ~((uint32_t)iocurrent);
}
}
}
}
/**
* @}
*/
/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
* @brief GPIO Read and Write
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Reads the specified input port pin.
* @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
* x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
* @param GPIO_Pin specifies the port bit to read.
* This parameter can be GPIO_PIN_x where x can be (0..15).
* @retval The input port pin value.
*/
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
GPIO_PinState bitstatus;
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
{
bitstatus = GPIO_PIN_SET;
}
else
{
bitstatus = GPIO_PIN_RESET;
}
return bitstatus;
}
/**
* @brief Sets or clears the selected data port bit.
*
* @note This function uses GPIOx_BSRR register to allow atomic read/modify
* accesses. In this way, there is no risk of an IRQ occurring between
* the read and the modify access.
*
* @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
* x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
* @param GPIO_Pin specifies the port bit to be written.
* This parameter can be one of GPIO_PIN_x where x can be (0..15).
* @param PinState specifies the value to be written to the selected bit.
* This parameter can be one of the GPIO_PinState enum values:
* @arg GPIO_PIN_RESET: to clear the port pin
* @arg GPIO_PIN_SET: to set the port pin
* @retval None
*/
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
{
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
assert_param(IS_GPIO_PIN_ACTION(PinState));
if(PinState != GPIO_PIN_RESET)
{
GPIOx->BSRR = GPIO_Pin;
}
else
{
GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U;
}
}
/**
* @brief Toggles the specified GPIO pins.
* @param GPIOx Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
* x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
* @param GPIO_Pin Specifies the pins to be toggled.
* @retval None
*/
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
GPIOx->ODR ^= GPIO_Pin;
}
/**
* @brief Locks GPIO Pins configuration registers.
* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
* @note The configuration of the locked GPIO pins can no longer be modified
* until the next reset.
* @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F4 family
* @param GPIO_Pin specifies the port bit to be locked.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
* @retval None
*/
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
__IO uint32_t tmp = GPIO_LCKR_LCKK;
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
/* Apply lock key write sequence */
tmp |= GPIO_Pin;
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
GPIOx->LCKR = tmp;
/* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
GPIOx->LCKR = GPIO_Pin;
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
GPIOx->LCKR = tmp;
/* Read LCKK bit*/
tmp = GPIOx->LCKR;
if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
{
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief This function handles EXTI interrupt request.
* @param GPIO_Pin Specifies the pins connected EXTI line
* @retval None
*/
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
{
/* EXTI line interrupt detected */
if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
{
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
HAL_GPIO_EXTI_Callback(GPIO_Pin);
}
}
/**
* @brief EXTI line detection callbacks.
* @param GPIO_Pin Specifies the pins connected EXTI line
* @retval None
*/
__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(GPIO_Pin);
/* NOTE: This function Should not be modified, when the callback is needed,
the HAL_GPIO_EXTI_Callback could be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_GPIO_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_pwr.c
* @author MCD Application Team
* @brief PWR HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Power Controller (PWR) peripheral:
* + Initialization and de-initialization functions
* + Peripheral Control functions
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup PWR PWR
* @brief PWR HAL module driver
* @{
*/
#ifdef HAL_PWR_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup PWR_Private_Constants
* @{
*/
/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
* @{
*/
#define PVD_MODE_IT 0x00010000U
#define PVD_MODE_EVT 0x00020000U
#define PVD_RISING_EDGE 0x00000001U
#define PVD_FALLING_EDGE 0x00000002U
/**
* @}
*/
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup PWR_Exported_Functions PWR Exported Functions
* @{
*/
/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and de-initialization functions
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..]
After reset, the backup domain (RTC registers, RTC backup data
registers and backup SRAM) is protected against possible unwanted
write accesses.
To enable access to the RTC Domain and RTC registers, proceed as follows:
(+) Enable the Power Controller (PWR) APB1 interface clock using the
__HAL_RCC_PWR_CLK_ENABLE() macro.
(+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
@endverbatim
* @{
*/
/**
* @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
* @retval None
*/
void HAL_PWR_DeInit(void)
{
__HAL_RCC_PWR_FORCE_RESET();
__HAL_RCC_PWR_RELEASE_RESET();
}
/**
* @brief Enables access to the backup domain (RTC registers, RTC
* backup data registers and backup SRAM).
* @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
* Backup Domain Access should be kept enabled.
* @retval None
*/
void HAL_PWR_EnableBkUpAccess(void)
{
*(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
}
/**
* @brief Disables access to the backup domain (RTC registers, RTC
* backup data registers and backup SRAM).
* @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
* Backup Domain Access should be kept enabled.
* @retval None
*/
void HAL_PWR_DisableBkUpAccess(void)
{
*(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
}
/**
* @}
*/
/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
* @brief Low Power modes configuration functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
*** PVD configuration ***
=========================
[..]
(+) The PVD is used to monitor the VDD power supply by comparing it to a
threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
(+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
than the PVD threshold. This event is internally connected to the EXTI
line16 and can generate an interrupt if enabled. This is done through
__HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
(+) The PVD is stopped in Standby mode.
*** Wake-up pin configuration ***
================================
[..]
(+) Wake-up pin is used to wake up the system from Standby mode. This pin is
forced in input pull-down configuration and is active on rising edges.
(+) There is one Wake-up pin: Wake-up Pin 1 on PA.00.
(++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13
(++) For STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01
*** Low Power modes configuration ***
=====================================
[..]
The devices feature 3 low-power modes:
(+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
(+) Stop mode: all clocks are stopped, regulator running, regulator
in low power mode
(+) Standby mode: 1.2V domain powered off.
*** Sleep mode ***
==================
[..]
(+) Entry:
The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
functions with
(++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
(++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
-@@- The Regulator parameter is not used for the STM32F4 family
and is kept as parameter just to maintain compatibility with the
lower power families (STM32L).
(+) Exit:
Any peripheral interrupt acknowledged by the nested vectored interrupt
controller (NVIC) can wake up the device from Sleep mode.
*** Stop mode ***
=================
[..]
In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
and the HSE RC oscillators are disabled. Internal SRAM and register contents
are preserved.
The voltage regulator can be configured either in normal or low-power mode.
To minimize the consumption In Stop mode, FLASH can be powered off before
entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
It can be switched on again by software after exiting the Stop mode using
the HAL_PWREx_DisableFlashPowerDown() function.
(+) Entry:
The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
function with:
(++) Main regulator ON.
(++) Low Power regulator ON.
(+) Exit:
Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
*** Standby mode ***
====================
[..]
(+)
The Standby mode allows to achieve the lowest power consumption. It is based
on the Cortex-M4 deep sleep mode, with the voltage regulator disabled.
The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
the HSE oscillator are also switched off. SRAM and register contents are lost
except for the RTC registers, RTC backup registers, backup SRAM and Standby
circuitry.
The voltage regulator is OFF.
(++) Entry:
(+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
(++) Exit:
(+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up,
tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
*** Auto-wake-up (AWU) from low-power mode ***
=============================================
[..]
(+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
Wake-up event, a tamper event or a time-stamp event, without depending on
an external interrupt (Auto-wake-up mode).
(+) RTC auto-wake-up (AWU) from the Stop and Standby modes
(++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
(++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
is necessary to configure the RTC to detect the tamper or time stamp event using the
HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
(++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to
configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
@endverbatim
* @{
*/
/**
* @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
* @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
* information for the PVD.
* @note Refer to the electrical characteristics of your device datasheet for
* more details about the voltage threshold corresponding to each
* detection level.
* @retval None
*/
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
{
/* Check the parameters */
assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
/* Set PLS[7:5] bits according to PVDLevel value */
MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
/* Clear any previous config. Keep it clear if no event or IT mode is selected */
__HAL_PWR_PVD_EXTI_DISABLE_EVENT();
__HAL_PWR_PVD_EXTI_DISABLE_IT();
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
/* Configure interrupt mode */
if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
{
__HAL_PWR_PVD_EXTI_ENABLE_IT();
}
/* Configure event mode */
if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
{
__HAL_PWR_PVD_EXTI_ENABLE_EVENT();
}
/* Configure the edge */
if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
{
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
}
if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
{
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
}
}
/**
* @brief Enables the Power Voltage Detector(PVD).
* @retval None
*/
void HAL_PWR_EnablePVD(void)
{
*(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
}
/**
* @brief Disables the Power Voltage Detector(PVD).
* @retval None
*/
void HAL_PWR_DisablePVD(void)
{
*(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
}
/**
* @brief Enables the Wake-up PINx functionality.
* @param WakeUpPinx Specifies the Power Wake-Up pin to enable.
* This parameter can be one of the following values:
* @arg PWR_WAKEUP_PIN1
* @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices
* @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices
* @retval None
*/
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
{
/* Check the parameter */
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
/* Enable the wake up pin */
SET_BIT(PWR->CSR, WakeUpPinx);
}
/**
* @brief Disables the Wake-up PINx functionality.
* @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
* This parameter can be one of the following values:
* @arg PWR_WAKEUP_PIN1
* @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices
* @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices
* @retval None
*/
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
{
/* Check the parameter */
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
/* Disable the wake up pin */
CLEAR_BIT(PWR->CSR, WakeUpPinx);
}
/**
* @brief Enters Sleep mode.
*
* @note In Sleep mode, all I/O pins keep the same state as in Run mode.
*
* @note In Sleep mode, the systick is stopped to avoid exit from this mode with
* systick interrupt when used as time base for Timeout
*
* @param Regulator Specifies the regulator state in SLEEP mode.
* This parameter can be one of the following values:
* @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
* @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
* @note This parameter is not used for the STM32F4 family and is kept as parameter
* just to maintain compatibility with the lower power families.
* @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction.
* This parameter can be one of the following values:
* @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
* @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
* @retval None
*/
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
{
/* Check the parameters */
assert_param(IS_PWR_REGULATOR(Regulator));
assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
/* Clear SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
/* Select SLEEP mode entry -------------------------------------------------*/
if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI();
}
else
{
/* Request Wait For Event */
__SEV();
__WFE();
__WFE();
}
}
/**
* @brief Enters Stop mode.
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
* @note When exiting Stop mode by issuing an interrupt or a wake-up event,
* the HSI RC oscillator is selected as system clock.
* @note When the voltage regulator operates in low power mode, an additional
* startup delay is incurred when waking up from Stop mode.
* By keeping the internal regulator ON during Stop mode, the consumption
* is higher although the startup time is reduced.
* @param Regulator Specifies the regulator state in Stop mode.
* This parameter can be one of the following values:
* @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
* @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
* @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction.
* This parameter can be one of the following values:
* @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
* @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
* @retval None
*/
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
{
/* Check the parameters */
assert_param(IS_PWR_REGULATOR(Regulator));
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
/* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */
MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator);
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
/* Select Stop mode entry --------------------------------------------------*/
if(STOPEntry == PWR_STOPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI();
}
else
{
/* Request Wait For Event */
__SEV();
__WFE();
__WFE();
}
/* Reset SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Enters Standby mode.
* @note In Standby mode, all I/O pins are high impedance except for:
* - Reset pad (still available)
* - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
* Alarm out, or RTC clock calibration out.
* - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
* - WKUP pin 1 (PA0) if enabled.
* @retval None
*/
void HAL_PWR_EnterSTANDBYMode(void)
{
/* Select Standby mode */
SET_BIT(PWR->CR, PWR_CR_PDDS);
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
/* This option is used to ensure that store operations are completed */
#if defined ( __CC_ARM)
__force_stores();
#endif
/* Request Wait For Interrupt */
__WFI();
}
/**
* @brief This function handles the PWR PVD interrupt request.
* @note This API should be called under the PVD_IRQHandler().
* @retval None
*/
void HAL_PWR_PVD_IRQHandler(void)
{
/* Check PWR Exti flag */
if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
{
/* PWR PVD interrupt user callback */
HAL_PWR_PVDCallback();
/* Clear PWR Exti pending bit */
__HAL_PWR_PVD_EXTI_CLEAR_FLAG();
}
}
/**
* @brief PWR PVD interrupt callback
* @retval None
*/
__weak void HAL_PWR_PVDCallback(void)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_PWR_PVDCallback could be implemented in the user file
*/
}
/**
* @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
* @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
* re-enters SLEEP mode when an interruption handling is over.
* Setting this bit is useful when the processor is expected to run only on
* interruptions handling.
* @retval None
*/
void HAL_PWR_EnableSleepOnExit(void)
{
/* Set SLEEPONEXIT bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
* @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
* re-enters SLEEP mode when an interruption handling is over.
* @retval None
*/
void HAL_PWR_DisableSleepOnExit(void)
{
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Enables CORTEX M4 SEVONPEND bit.
* @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
* WFE to wake up when an interrupt moves from inactive to pended.
* @retval None
*/
void HAL_PWR_EnableSEVOnPend(void)
{
/* Set SEVONPEND bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @brief Disables CORTEX M4 SEVONPEND bit.
* @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
* WFE to wake up when an interrupt moves from inactive to pended.
* @retval None
*/
void HAL_PWR_DisableSEVOnPend(void)
{
/* Clear SEVONPEND bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_PWR_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_pwr_ex.c
* @author MCD Application Team
* @brief Extended PWR HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of PWR extension peripheral:
* + Peripheral Extended features functions
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup PWREx PWREx
* @brief PWR HAL module driver
* @{
*/
#ifdef HAL_PWR_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup PWREx_Private_Constants
* @{
*/
#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000U
#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000U
#define PWR_BKPREG_TIMEOUT_VALUE 1000U
#define PWR_VOSRDY_TIMEOUT_VALUE 1000U
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
* @{
*/
/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
* @brief Peripheral Extended features functions
*
@verbatim
===============================================================================
##### Peripheral extended features functions #####
===============================================================================
*** Main and Backup Regulators configuration ***
================================================
[..]
(+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
retained even in Standby or VBAT mode when the low power backup regulator
is enabled. It can be considered as an internal EEPROM when VBAT is
always present. You can use the HAL_PWREx_EnableBkUpReg() function to
enable the low power backup regulator.
(+) When the backup domain is supplied by VDD (analog switch connected to VDD)
the backup SRAM is powered from VDD which replaces the VBAT power supply to
save battery life.
(+) The backup SRAM is not mass erased by a tamper event. It is read
protected to prevent confidential data, such as cryptographic private
key, from being accessed. The backup SRAM can be erased only through
the Flash interface when a protection level change from level 1 to
level 0 is requested.
-@- Refer to the description of Read protection (RDP) in the Flash
programming manual.
(+) The main internal regulator can be configured to have a tradeoff between
performance and power consumption when the device does not operate at
the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
macro which configure VOS bit in PWR_CR register
Refer to the product datasheets for more details.
*** FLASH Power Down configuration ****
=======================================
[..]
(+) By setting the FPDS bit in the PWR_CR register by using the
HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
down mode when the device enters Stop mode. When the Flash memory
is in power down mode, an additional startup delay is incurred when
waking up from Stop mode.
(+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, the scale can be modified only when the PLL
is OFF and the HSI or HSE clock source is selected as system clock.
The new value programmed is active only when the PLL is ON.
When the PLL is OFF, the voltage scale 3 is automatically selected.
Refer to the datasheets for more details.
*** Over-Drive and Under-Drive configuration ****
=================================================
[..]
(+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Run mode: the main regulator has
2 operating modes available:
(++) Normal mode: The CPU and core logic operate at maximum frequency at a given
voltage scaling (scale 1, scale 2 or scale 3)
(++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
higher frequency than the normal mode for a given voltage scaling (scale 1,
scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
the sequence described in Reference manual.
(+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Stop mode: the main regulator or low power regulator
supplies a low power voltage to the 1.2V domain, thus preserving the content of registers
and internal SRAM. 2 operating modes are available:
(++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
available when the main regulator or the low power regulator is used in Scale 3 or
low voltage mode.
(++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
available when the main regulator or the low power regulator is in low voltage mode.
@endverbatim
* @{
*/
/**
* @brief Enables the Backup Regulator.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
{
uint32_t tickstart = 0U;
*(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE;
/* Get tick */
tickstart = HAL_GetTick();
/* Wait till Backup regulator ready flag is set */
while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
{
if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
/**
* @brief Disables the Backup Regulator.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
{
uint32_t tickstart = 0U;
*(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE;
/* Get tick */
tickstart = HAL_GetTick();
/* Wait till Backup regulator ready flag is set */
while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
{
if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
/**
* @brief Enables the Flash Power Down in Stop mode.
* @retval None
*/
void HAL_PWREx_EnableFlashPowerDown(void)
{
*(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE;
}
/**
* @brief Disables the Flash Power Down in Stop mode.
* @retval None
*/
void HAL_PWREx_DisableFlashPowerDown(void)
{
*(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE;
}
/**
* @brief Return Voltage Scaling Range.
* @retval The configured scale for the regulator voltage(VOS bit field).
* The returned value can be one of the following:
* - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
* - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
* - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
*/
uint32_t HAL_PWREx_GetVoltageRange(void)
{
return (PWR->CR & PWR_CR_VOS);
}
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
/**
* @brief Configures the main internal regulator output voltage.
* @param VoltageScaling specifies the regulator output voltage to achieve
* a tradeoff between performance and power consumption.
* This parameter can be one of the following values:
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
* the maximum value of fHCLK = 168 MHz.
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
* the maximum value of fHCLK = 144 MHz.
* @note When moving from Range 1 to Range 2, the system frequency must be decreased to
* a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API.
* When moving from Range 2 to Range 1, the system frequency can be increased to
* a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
{
uint32_t tickstart = 0U;
assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
/* Enable PWR RCC Clock Peripheral */
__HAL_RCC_PWR_CLK_ENABLE();
/* Set Range */
__HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
/* Get Start Tick*/
tickstart = HAL_GetTick();
while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
{
if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || \
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \
defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
/**
* @brief Configures the main internal regulator output voltage.
* @param VoltageScaling specifies the regulator output voltage to achieve
* a tradeoff between performance and power consumption.
* This parameter can be one of the following values:
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
* the maximum value of fHCLK is 168 MHz. It can be extended to
* 180 MHz by activating the over-drive mode.
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
* the maximum value of fHCLK is 144 MHz. It can be extended to,
* 168 MHz by activating the over-drive mode.
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode,
* the maximum value of fHCLK is 120 MHz.
* @note To update the system clock frequency(SYSCLK):
* - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
* - Call the HAL_RCC_OscConfig() to configure the PLL.
* - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
* - Set the new system clock frequency using the HAL_RCC_ClockConfig().
* @note The scale can be modified only when the HSI or HSE clock source is selected
* as system clock source, otherwise the API returns HAL_ERROR.
* @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
* value in the PWR_CR1 register are not taken in account.
* @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
* @note The new voltage scale is active only when the PLL is ON.
* @retval HAL Status
*/
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
{
uint32_t tickstart = 0U;
assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
/* Enable PWR RCC Clock Peripheral */
__HAL_RCC_PWR_CLK_ENABLE();
/* Check if the PLL is used as system clock or not */
if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
{
/* Disable the main PLL */
__HAL_RCC_PLL_DISABLE();
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till PLL is disabled */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
/* Set Range */
__HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
/* Enable the main PLL */
__HAL_RCC_PLL_ENABLE();
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till PLL is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
/* Get Start Tick */
tickstart = HAL_GetTick();
while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
{
if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
else
{
return HAL_ERROR;
}
return HAL_OK;
}
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
#if defined(STM32F469xx) || defined(STM32F479xx)
/**
* @brief Enables Wakeup Pin Detection on high level (rising edge).
* @retval None
*/
void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void)
{
*(__IO uint32_t *) CSR_WUPP_BB = (uint32_t)DISABLE;
}
/**
* @brief Enables Wakeup Pin Detection on low level (falling edge).
* @retval None
*/
void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void)
{
*(__IO uint32_t *) CSR_WUPP_BB = (uint32_t)ENABLE;
}
#endif /* STM32F469xx || STM32F479xx */
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\
defined(STM32F413xx) || defined(STM32F423xx)
/**
* @brief Enables Main Regulator low voltage mode.
* @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/
* STM32F413xx/STM32F423xx devices.
* @retval None
*/
void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
{
*(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE;
}
/**
* @brief Disables Main Regulator low voltage mode.
* @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/
* STM32F413xx/STM32F423xxdevices.
* @retval None
*/
void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
{
*(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE;
}
/**
* @brief Enables Low Power Regulator low voltage mode.
* @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/
* STM32F413xx/STM32F423xx devices.
* @retval None
*/
void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
{
*(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE;
}
/**
* @brief Disables Low Power Regulator low voltage mode.
* @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/
* STM32F413xx/STM32F423xx devices.
* @retval None
*/
void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
{
*(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE;
}
#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx ||
STM32F413xx || STM32F423xx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
/**
* @brief Activates the Over-Drive mode.
* @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices.
* This mode allows the CPU and the core logic to operate at a higher frequency
* than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
* @note It is recommended to enter or exit Over-drive mode when the application is not running
* critical tasks and when the system clock source is either HSI or HSE.
* During the Over-drive switch activation, no peripheral clocks should be enabled.
* The peripheral clocks must be enabled once the Over-drive mode is activated.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
{
uint32_t tickstart = 0U;
__HAL_RCC_PWR_CLK_ENABLE();
/* Enable the Over-drive to extend the clock frequency to 180 Mhz */
__HAL_PWR_OVERDRIVE_ENABLE();
/* Get tick */
tickstart = HAL_GetTick();
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
{
if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
/* Enable the Over-drive switch */
__HAL_PWR_OVERDRIVESWITCHING_ENABLE();
/* Get tick */
tickstart = HAL_GetTick();
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
{
if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
/**
* @brief Deactivates the Over-Drive mode.
* @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices.
* This mode allows the CPU and the core logic to operate at a higher frequency
* than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
* @note It is recommended to enter or exit Over-drive mode when the application is not running
* critical tasks and when the system clock source is either HSI or HSE.
* During the Over-drive switch activation, no peripheral clocks should be enabled.
* The peripheral clocks must be enabled once the Over-drive mode is activated.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
{
uint32_t tickstart = 0U;
__HAL_RCC_PWR_CLK_ENABLE();
/* Disable the Over-drive switch */
__HAL_PWR_OVERDRIVESWITCHING_DISABLE();
/* Get tick */
tickstart = HAL_GetTick();
while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
{
if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
/* Disable the Over-drive */
__HAL_PWR_OVERDRIVE_DISABLE();
/* Get tick */
tickstart = HAL_GetTick();
while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
{
if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
return HAL_OK;
}
/**
* @brief Enters in Under-Drive STOP mode.
*
* @note This mode is only available for STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx devices.
*
* @note This mode can be selected only when the Under-Drive is already active
*
* @note This mode is enabled only with STOP low power mode.
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
* mode is only available when the main regulator or the low power regulator
* is in low voltage mode
*
* @note If the Under-drive mode was enabled, it is automatically disabled after
* exiting Stop mode.
* When the voltage regulator operates in Under-drive mode, an additional
* startup delay is induced when waking up from Stop mode.
*
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
*
* @note When exiting Stop mode by issuing an interrupt or a wake-up event,
* the HSI RC oscillator is selected as system clock.
*
* @note When the voltage regulator operates in low power mode, an additional
* startup delay is incurred when waking up from Stop mode.
* By keeping the internal regulator ON during Stop mode, the consumption
* is higher although the startup time is reduced.
*
* @param Regulator specifies the regulator state in STOP mode.
* This parameter can be one of the following values:
* @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode
* and Flash memory in power-down when the device is in Stop under-drive mode
* @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode
* and Flash memory in power-down when the device is in Stop under-drive mode
* @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
* This parameter can be one of the following values:
* @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
* @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
* @retval None
*/
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
{
uint32_t tmpreg1 = 0U;
/* Check the parameters */
assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
/* Enable Power ctrl clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Enable the Under-drive Mode ---------------------------------------------*/
/* Clear Under-drive flag */
__HAL_PWR_CLEAR_ODRUDR_FLAG();
/* Enable the Under-drive */
__HAL_PWR_UNDERDRIVE_ENABLE();
/* Select the regulator state in STOP mode ---------------------------------*/
tmpreg1 = PWR->CR;
/* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS);
/* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
tmpreg1 |= Regulator;
/* Store the new value */
PWR->CR = tmpreg1;
/* Set SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
/* Select STOP mode entry --------------------------------------------------*/
if(STOPEntry == PWR_SLEEPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI();
}
else
{
/* Request Wait For Event */
__WFE();
}
/* Reset SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
return HAL_OK;
}
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_PWR_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c 0 → 100644
/**
******************************************************************************
* @file stm32f4xx_hal_rcc.c
* @author MCD Application Team
* @brief RCC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Reset and Clock Control (RCC) peripheral:
* + Initialization and de-initialization functions
* + Peripheral Control functions
*
@verbatim
==============================================================================
##### RCC specific features #####
==============================================================================
[..]
After reset the device is running from Internal High Speed oscillator
(HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
and I-Cache are disabled, and all peripherals are off except internal
SRAM, Flash and JTAG.
(+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
all peripherals mapped on these busses are running at HSI speed.
(+) The clock for all peripherals is switched off, except the SRAM and FLASH.
(+) All GPIOs are in input floating state, except the JTAG pins which
are assigned to be used for debug purpose.
[..]
Once the device started from reset, the user application has to:
(+) Configure the clock source to be used to drive the System clock
(if the application needs higher frequency/performance)
(+) Configure the System clock frequency and Flash settings
(+) Configure the AHB and APB busses prescalers
(+) Enable the clock for the peripheral(s) to be used
(+) Configure the clock source(s) for peripherals which clocks are not
derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
##### RCC Limitations #####
==============================================================================
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
from/to registers.
(+) This delay depends on the peripheral mapping.
(+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
after the clock enable bit is set on the hardware register
(+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
after the clock enable bit is set on the hardware register
[..]
Implemented Workaround:
(+) For AHB & APB peripherals, a dummy read to the peripheral register has been
inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup RCC RCC
* @brief RCC HAL module driver
* @{
*/
#ifdef HAL_RCC_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup RCC_Private_Constants
* @{
*/
/* Private macro -------------------------------------------------------------*/
#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define MCO1_GPIO_PORT GPIOA
#define MCO1_PIN GPIO_PIN_8
#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define MCO2_GPIO_PORT GPIOC
#define MCO2_PIN GPIO_PIN_9
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup RCC_Private_Variables RCC Private Variables
* @{
*/
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup RCC_Exported_Functions RCC Exported Functions
* @{
*/
/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..]
This section provides functions allowing to configure the internal/external oscillators
(HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1
and APB2).
[..] Internal/external clock and PLL configuration
(#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
the PLL as System clock source.
(#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
clock source.
(#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
through the PLL as System clock source. Can be used also as RTC clock source.
(#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
(#) PLL (clocked by HSI or HSE), featuring two different output clocks:
(++) The first output is used to generate the high speed system clock (up to 168 MHz)
(++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
(#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
and if a HSE clock failure occurs(HSE used directly or through PLL as System
clock source), the System clocks automatically switched to HSI and an interrupt
is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
(Non-Maskable Interrupt) exception vector.
(#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
clock (through a configurable prescaler) on PA8 pin.
(#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
clock (through a configurable prescaler) on PC9 pin.
[..] System, AHB and APB busses clocks configuration
(#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
HSE and PLL.
The AHB clock (HCLK) is derived from System clock through configurable
prescaler and used to clock the CPU, memory and peripherals mapped
on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
from AHB clock through configurable prescalers and used to clock
the peripherals mapped on these busses. You can use
"HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
(#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum
frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz.
Depending on the device voltage range, the maximum frequency should
be adapted accordingly (refer to the product datasheets for more details).
(#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices,
the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz.
Depending on the device voltage range, the maximum frequency should
be adapted accordingly (refer to the product datasheets for more details).
(#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz,
PCLK2 84 MHz and PCLK1 42 MHz.
Depending on the device voltage range, the maximum frequency should
be adapted accordingly (refer to the product datasheets for more details).
(#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz,
PCLK2 100 MHz and PCLK1 50 MHz.
Depending on the device voltage range, the maximum frequency should
be adapted accordingly (refer to the product datasheets for more details).
@endverbatim
* @{
*/
/**
* @brief Resets the RCC clock configuration to the default reset state.
* @note The default reset state of the clock configuration is given below:
* - HSI ON and used as system clock source
* - HSE and PLL OFF
* - AHB, APB1 and APB2 prescaler set to 1.
* - CSS, MCO1 and MCO2 OFF
* - All interrupts disabled
* @note This function doesn't modify the configuration of the
* - Peripheral clocks
* - LSI, LSE and RTC clocks
* @retval HAL status
*/
__weak HAL_StatusTypeDef HAL_RCC_DeInit(void)
{
return HAL_OK;
}
/**
* @brief Initializes the RCC Oscillators according to the specified parameters in the
* RCC_OscInitTypeDef.
* @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
* contains the configuration information for the RCC Oscillators.
* @note The PLL is not disabled when used as system clock.
* @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
* supported by this API. User should request a transition to LSE Off
* first and then LSE On or LSE Bypass.
* @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
* supported by this API. User should request a transition to HSE Off
* first and then HSE On or HSE Bypass.
* @retval HAL status
*/
__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
{
uint32_t tickstart;
/* Check Null pointer */
if(RCC_OscInitStruct == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
/*------------------------------- HSE Configuration ------------------------*/
if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
{
/* Check the parameters */
assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
/* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
{
if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
{
return HAL_ERROR;
}
}
else
{
/* Set the new HSE configuration ---------------------------------------*/
__HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
/* Check the HSE State */
if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
{
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till HSE is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
else
{
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till HSE is bypassed or disabled */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
}
}
/*----------------------------- HSI Configuration --------------------------*/
if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
{
/* Check the parameters */
assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
/* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
{
/* When HSI is used as system clock it will not disabled */
if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
{
return HAL_ERROR;
}
/* Otherwise, just the calibration is allowed */
else
{
/* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
__HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
}
}
else
{
/* Check the HSI State */
if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
{
/* Enable the Internal High Speed oscillator (HSI). */
__HAL_RCC_HSI_ENABLE();
/* Get Start Tick*/
tickstart = HAL_GetTick();
/* Wait till HSI is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
/* Adjusts the Internal High Speed oscillator (HSI) calibration value. */
__HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
}
else
{
/* Disable the Internal High Speed oscillator (HSI). */
__HAL_RCC_HSI_DISABLE();
/* Get Start Tick*/
tickstart = HAL_GetTick();
/* Wait till HSI is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
}
}
/*------------------------------ LSI Configuration -------------------------*/
if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
{
/* Check the parameters */
assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
/* Check the LSI State */
if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
{
/* Enable the Internal Low Speed oscillator (LSI). */
__HAL_RCC_LSI_ENABLE();
/* Get Start Tick*/
tickstart = HAL_GetTick();
/* Wait till LSI is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
else
{
/* Disable the Internal Low Speed oscillator (LSI). */
__HAL_RCC_LSI_DISABLE();
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till LSI is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
}
/*------------------------------ LSE Configuration -------------------------*/
if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
{
/* Check the parameters */
assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
/* Enable Power Clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Enable write access to Backup domain */
PWR->CR |= PWR_CR_DBP;
/* Wait for Backup domain Write protection enable */
tickstart = HAL_GetTick();
while((PWR->CR & PWR_CR_DBP) == RESET)
{
if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
/* Set the new LSE configuration -----------------------------------------*/
__HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
/* Check the LSE State */
if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
{
/* Get Start Tick*/
tickstart = HAL_GetTick();
/* Wait till LSE is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
else
{
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till LSE is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
}
/*-------------------------------- PLL Configuration -----------------------*/
/* Check the parameters */
assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
{
/* Check if the PLL is used as system clock or not */
if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
{
if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
{
/* Check the parameters */
assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
/* Disable the main PLL. */
__HAL_RCC_PLL_DISABLE();
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till PLL is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
/* Configure the main PLL clock source, multiplication and division factors. */
WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \
RCC_OscInitStruct->PLL.PLLM | \
(RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \
(((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \
(RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)));
/* Enable the main PLL. */
__HAL_RCC_PLL_ENABLE();
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till PLL is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
else
{
/* Disable the main PLL. */
__HAL_RCC_PLL_DISABLE();
/* Get Start Tick */
tickstart = HAL_GetTick();
/* Wait till PLL is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
}
else
{
return HAL_ERROR;
}
}
return HAL_OK;
}
/**
* @brief Initializes the CPU, AHB and APB busses clocks according to the specified
* parameters in the RCC_ClkInitStruct.
* @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
* contains the configuration information for the RCC peripheral.
* @param FLatency FLASH Latency, this parameter depend on device selected
*
* @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
* and updated by HAL_RCC_GetHCLKFreq() function called within this function
*
* @note The HSI is used (enabled by hardware) as system clock source after
* startup from Reset, wake-up from STOP and STANDBY mode, or in case
* of failure of the HSE used directly or indirectly as system clock
* (if the Clock Security System CSS is enabled).
*
* @note A switch from one clock source to another occurs only if the target
* clock source is ready (clock stable after startup delay or PLL locked).
* If a clock source which is not yet ready is selected, the switch will
* occur when the clock source will be ready.
*
* @note Depending on the device voltage range, the software has to set correctly
* HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
* (for more details refer to section above "Initialization/de-initialization functions")
* @retval None
*/
HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
{
uint32_t tickstart;
/* Check Null pointer */
if(RCC_ClkInitStruct == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
assert_param(IS_FLASH_LATENCY(FLatency));
/* To correctly read data from FLASH memory, the number of wait states (LATENCY)
must be correctly programmed according to the frequency of the CPU clock
(HCLK) and the supply voltage of the device. */
/* Increasing the number of wait states because of higher CPU frequency */
if(FLatency > __HAL_FLASH_GET_LATENCY())
{
/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
__HAL_FLASH_SET_LATENCY(FLatency);
/* Check that the new number of wait states is taken into account to access the Flash
memory by reading the FLASH_ACR register */
if(__HAL_FLASH_GET_LATENCY() != FLatency)
{
return HAL_ERROR;
}
}
/*-------------------------- HCLK Configuration --------------------------*/
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
{
/* Set the highest APBx dividers in order to ensure that we do not go through
a non-spec phase whatever we decrease or increase HCLK. */
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16);
}
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3));
}
assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
}
/*------------------------- SYSCLK Configuration ---------------------------*/
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
{
assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
/* HSE is selected as System Clock Source */
if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
{
/* Check the HSE ready flag */
if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
{
return HAL_ERROR;
}
}
/* PLL is selected as System Clock Source */
else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) ||
(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK))
{
/* Check the PLL ready flag */
if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
{
return HAL_ERROR;
}
}
/* HSI is selected as System Clock Source */
else
{
/* Check the HSI ready flag */
if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
{
return HAL_ERROR;
}
}
__HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
/* Get Start Tick */
tickstart = HAL_GetTick();
while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos))
{
if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
}
}
/* Decreasing the number of wait states because of lower CPU frequency */
if(FLatency < __HAL_FLASH_GET_LATENCY())
{
/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
__HAL_FLASH_SET_LATENCY(FLatency);
/* Check that the new number of wait states is taken into account to access the Flash
memory by reading the FLASH_ACR register */
if(__HAL_FLASH_GET_LATENCY() != FLatency)
{
return HAL_ERROR;
}
}
/*-------------------------- PCLK1 Configuration ---------------------------*/
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
{
assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
}
/*-------------------------- PCLK2 Configuration ---------------------------*/
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
{
assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U));
}
/* Update the SystemCoreClock global variable */
SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos];
/* Configure the source of time base considering new system clocks settings */
HAL_InitTick (TICK_INT_PRIORITY);
return HAL_OK;
}
/**
* @}
*/
/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
* @brief RCC clocks control functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to control the RCC Clocks
frequencies.
@endverbatim
* @{
*/
/**
* @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
* @note PA8/PC9 should be configured in alternate function mode.
* @param RCC_MCOx specifies the output direction for the clock source.
* This parameter can be one of the following values:
* @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
* @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
* @param RCC_MCOSource specifies the clock source to output.
* This parameter can be one of the following values:
* @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
* @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
* @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
* @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
* @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
* @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
* @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
* @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
* @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
* @param RCC_MCODiv specifies the MCOx prescaler.
* This parameter can be one of the following values:
* @arg RCC_MCODIV_1: no division applied to MCOx clock
* @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
* @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
* @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
* @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
* @note For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have
* at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
* @retval None
*/
void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Check the parameters */
assert_param(IS_RCC_MCO(RCC_MCOx));
assert_param(IS_RCC_MCODIV(RCC_MCODiv));
/* RCC_MCO1 */
if(RCC_MCOx == RCC_MCO1)
{
assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
/* MCO1 Clock Enable */
__MCO1_CLK_ENABLE();
/* Configure the MCO1 pin in alternate function mode */
GPIO_InitStruct.Pin = MCO1_PIN;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
/* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
/* This RCC MCO1 enable feature is available only on STM32F410xx devices */
#if defined(RCC_CFGR_MCO1EN)
__HAL_RCC_MCO1_ENABLE();
#endif /* RCC_CFGR_MCO1EN */
}
#if defined(RCC_CFGR_MCO2)
else
{
assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
/* MCO2 Clock Enable */
__MCO2_CLK_ENABLE();
/* Configure the MCO2 pin in alternate function mode */
GPIO_InitStruct.Pin = MCO2_PIN;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
/* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3U)));
/* This RCC MCO2 enable feature is available only on STM32F410Rx devices */
#if defined(RCC_CFGR_MCO2EN)
__HAL_RCC_MCO2_ENABLE();
#endif /* RCC_CFGR_MCO2EN */
}
#endif /* RCC_CFGR_MCO2 */
}
/**
* @brief Enables the Clock Security System.
* @note If a failure is detected on the HSE oscillator clock, this oscillator
* is automatically disabled and an interrupt is generated to inform the
* software about the failure (Clock Security System Interrupt, CSSI),
* allowing the MCU to perform rescue operations. The CSSI is linked to
* the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
* @retval None
*/
void HAL_RCC_EnableCSS(void)
{
*(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
}
/**
* @brief Disables the Clock Security System.
* @retval None
*/
void HAL_RCC_DisableCSS(void)
{
*(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
}
/**
* @brief Returns the SYSCLK frequency
*
* @note The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
* @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
* @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
* @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
* @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
* 16 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
* @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
* frequency of the crystal used. Otherwise, this function may
* have wrong result.
*
* @note The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @note This function can be used by the user application to compute the
* baudrate for the communication peripherals or configure other parameters.
*
* @note Each time SYSCLK changes, this function must be called to update the
* right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
*
*
* @retval SYSCLK frequency
*/
__weak uint32_t HAL_RCC_GetSysClockFreq(void)
{
uint32_t pllm = 0U, pllvco = 0U, pllp = 0U;
uint32_t sysclockfreq = 0U;
/* Get SYSCLK source -------------------------------------------------------*/
switch (RCC->CFGR & RCC_CFGR_SWS)
{
case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
{
sysclockfreq = HSI_VALUE;
break;
}
case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
{
sysclockfreq = HSE_VALUE;
break;
}
case RCC_CFGR_SWS_PLL: /* PLL used as system clock source */
{
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
SYSCLK = PLL_VCO / PLLP */
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
{
/* HSE used as PLL clock source */
pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
}
else
{
/* HSI used as PLL clock source */
pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
}
pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U);
sysclockfreq = pllvco/pllp;
break;
}
default:
{
sysclockfreq = HSI_VALUE;
break;
}
}
return sysclockfreq;
}
/**
* @brief Returns the HCLK frequency
* @note Each time HCLK changes, this function must be called to update the
* right HCLK value. Otherwise, any configuration based on this function will be incorrect.
*
* @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
* and updated within this function
* @retval HCLK frequency
*/
uint32_t HAL_RCC_GetHCLKFreq(void)
{
return SystemCoreClock;
}
/**
* @brief Returns the PCLK1 frequency
* @note Each time PCLK1 changes, this function must be called to update the
* right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
* @retval PCLK1 frequency
*/
uint32_t HAL_RCC_GetPCLK1Freq(void)
{
/* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]);
}
/**
* @brief Returns the PCLK2 frequency
* @note Each time PCLK2 changes, this function must be called to update the
* right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
* @retval PCLK2 frequency
*/
uint32_t HAL_RCC_GetPCLK2Freq(void)
{
/* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]);
}
/**
* @brief Configures the RCC_OscInitStruct according to the internal
* RCC configuration registers.
* @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
* will be configured.
* @retval None
*/
__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
{
/* Set all possible values for the Oscillator type parameter ---------------*/
RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
/* Get the HSE configuration -----------------------------------------------*/
if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
{
RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
}
else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
{
RCC_OscInitStruct->HSEState = RCC_HSE_ON;
}
else
{
RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
}
/* Get the HSI configuration -----------------------------------------------*/
if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
{
RCC_OscInitStruct->HSIState = RCC_HSI_ON;
}
else
{
RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
}
RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
/* Get the LSE configuration -----------------------------------------------*/
if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
{
RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
}
else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
{
RCC_OscInitStruct->LSEState = RCC_LSE_ON;
}
else
{
RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
}
/* Get the LSI configuration -----------------------------------------------*/
if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
{
RCC_OscInitStruct->LSIState = RCC_LSI_ON;
}
else
{
RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
}
/* Get the PLL configuration -----------------------------------------------*/
if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
{
RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
}
else
{
RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
}
RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos);
RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos);
}
/**
* @brief Configures the RCC_ClkInitStruct according to the internal
* RCC configuration registers.
* @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that
* will be configured.
* @param pFLatency Pointer on the Flash Latency.
* @retval None
*/
void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
{
/* Set all possible values for the Clock type parameter --------------------*/
RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
/* Get the SYSCLK configuration --------------------------------------------*/
RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
/* Get the HCLK configuration ----------------------------------------------*/
RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
/* Get the APB1 configuration ----------------------------------------------*/
RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
/* Get the APB2 configuration ----------------------------------------------*/
RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U);
/* Get the Flash Wait State (Latency) configuration ------------------------*/
*pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
}
/**
* @brief This function handles the RCC CSS interrupt request.
* @note This API should be called under the NMI_Handler().
* @retval None
*/
void HAL_RCC_NMI_IRQHandler(void)
{
/* Check RCC CSSF flag */
if(__HAL_RCC_GET_IT(RCC_IT_CSS))
{
/* RCC Clock Security System interrupt user callback */
HAL_RCC_CSSCallback();
/* Clear RCC CSS pending bit */
__HAL_RCC_CLEAR_IT(RCC_IT_CSS);
}
}
/**
* @brief RCC Clock Security System interrupt callback
* @retval None
*/
__weak void HAL_RCC_CSSCallback(void)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_RCC_CSSCallback could be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_RCC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stmf4discoveryRTOS-SW/STM32F407VGTx_FLASH.ld 0 → 100644
/*
*****************************************************************************
**
** File : LinkerScript.ld
**
** Abstract : Linker script for STM32F407VGTx Device with
** 1024KByte FLASH, 128KByte RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
**
** Distribution: The file is distributed as is, without any warranty
** of any kind.
**
** (c)Copyright Ac6.
** You may use this file as-is or modify it according to the needs of your
** project. Distribution of this file (unmodified or modified) is not
** permitted. Ac6 permit registered System Workbench for MCU users the
** rights to distribute the assembled, compiled & linked contents of this
** file as part of an application binary file, provided that it is built
** using the System Workbench for MCU toolchain.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20020000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x3000; /* required amount of heap */
_Min_Stack_Size = 0x6000; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
_siccmram = LOADADDR(.ccmram);
/* CCM-RAM section
*
* IMPORTANT NOTE!
* If initialized variables will be placed in this section,
* the startup code needs to be modified to copy the init-values.
*/
.ccmram :
{
. = ALIGN(4);
_sccmram = .; /* create a global symbol at ccmram start */
*(.ccmram)
*(.ccmram*)
. = ALIGN(4);
_eccmram = .; /* create a global symbol at ccmram end */
} >CCMRAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}
stmf4discoveryRTOS-SW/STM32F4DISCOVERY.xml 0 → 100644
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE targetDefinitions [
<!ELEMENT targetDefinitions (board)>
<!ELEMENT board (name, dbgIF+, dbgDEV, mcuId)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT dbgIF (#PCDATA)>
<!ELEMENT dbgDEV (#PCDATA)>
<!ELEMENT mcuId (#PCDATA)>
<!ATTLIST board id CDATA #REQUIRED>
]>
<targetDefinitions>
<board id="stm32f4discovery">
<name>STM32F4DISCOVERY</name>
<dbgIF>SWD</dbgIF>
<dbgIF>JTAG</dbgIF>
<dbgDEV>ST-Link</dbgDEV>
<mcuId>stm32f407vgtx</mcuId>
</board>
</targetDefinitions>
stmf4discoveryRTOS-SW/mx.scratch 0 → 100644
<?xml version="1.0" encoding="UTF-8"?>
<Project>
<ProjectName>C:\Users\Nutikodu\git\drive_controller\STM32workspace\stmf4discoveryRTOS-SW\\stmf4discoveryRTOS-SW</ProjectName>
<CMSIS>..\Drivers\CMSIS</CMSIS>
<HAL_Driver>C:\Users\Nutikodu\STM32Cube\Repository\STM32Cube_FW_F4_V1.17.0\Drivers\CMSIS</HAL_Driver>
<Toolchain>SW4STM32</Toolchain>
<Version>0</Version>
<filestoremove>
<file>
</file>
</filestoremove>
<inctoremove>
<Aincludes>
<include></include>
</Aincludes>
<Cincludes>
</Cincludes>
</inctoremove>
<configs>
<config>
<name>stmf4discoveryRTOS-SW</name>
<device>STM32F407VGTx</device>
<heapSize>0x3000</heapSize>
<stackSize>0x6000</stackSize>
<board>STM32F4DISCOVERY</board>
<usedDebug>true</usedDebug>
<debugprobe></debugprobe>
<optimization>6</optimization>
<icfloc>0</icfloc>
<Adefines>
<define></define>
</Adefines>
<UsedFreeRTOS>true</UsedFreeRTOS>
<Aincludes>
<include></include>
</Aincludes>
<Cdefines>
<define>__weak=__attribute__((weak))</define>
<define>__packed=__attribute__((__packed__))</define>
</Cdefines>
<definestoremove>
<Adefines>
<define></define>
</Adefines>
<Cdefines>
<define>USE_FULL_LL_DRIVER</define>
<define>MBEDTLS_CONFIG_FILE=&quot;mbedtls_config.h&quot;</define>
<define>_TIMEVAL_DEFINED</define>
<define>_SYS_TIME_H_</define>
</Cdefines>
</definestoremove>
<Cincludes>
<include>..\Inc</include>
<include>..\Drivers\STM32F4xx_HAL_Driver\Inc</include>
<include>..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy</include>
<include>..\Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F</include>
<include>..\Drivers\CMSIS\Device\ST\STM32F4xx\Include</include>
<include>..\Middlewares\Third_Party\FreeRTOS\Source\include</include>
<include>..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS</include>
<include>..\Drivers\CMSIS\Include</include>
</Cincludes>
</config>
</configs>
<underRoot>true</underRoot>
<copyAsReference>false</copyAsReference>
<sourceEntries>
<sourceEntry>
<name>Inc</name>
</sourceEntry>
<sourceEntry>
<name>Src</name>
</sourceEntry>
<sourceEntry>
<name>Drivers</name>
</sourceEntry>
<sourceEntry>
<name>Middlewares</name>
</sourceEntry>
</sourceEntries>
</Project>
stmf4discoveryRTOS-SW/stmf4discoveryRTOS-SW Debug.cfg 0 → 100644
# This is an STM32F4DISCOVERY board with a single STM32F407VGTx chip
#
# Generated by System Workbench for STM32
# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s)
source [find interface/stlink.cfg]
set WORKAREASIZE 0x8000
transport select "hla_swd"
set CHIPNAME STM32F407VGTx
# Enable debug when in low power modes
set ENABLE_LOW_POWER 1
# Stop Watchdog counters when halt
set STOP_WATCHDOG 1
# STlink Debug clock frequency
set CLOCK_FREQ 4000
# use hardware reset, connect under reset
# connect_assert_srst needed if low power mode application running (WFI...)
reset_config srst_only srst_nogate connect_assert_srst
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]
stmf4discoveryRTOS-SW/stmf4discoveryRTOS-SW.ioc 0 → 100644
#MicroXplorer Configuration settings - do not modify
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_10
ADC1.ClockPrescaler=ADC_CLOCK_SYNC_PCLK_DIV4
ADC1.ContinuousConvMode=ENABLE
ADC1.DMAContinuousRequests=DISABLE
ADC1.DataAlign=ADC_DATAALIGN_RIGHT
ADC1.DiscontinuousConvMode=DISABLE
ADC1.EOCSelection=ADC_EOC_SEQ_CONV
ADC1.EnableAnalogWatchDog=false
ADC1.ExternalTrigConv=ADC_SOFTWARE_START
ADC1.ExternalTrigConvEdge=ADC_EXTERNALTRIGCONVEDGE_NONE
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master,ContinuousConvMode,ClockPrescaler,Resolution,DataAlign,ScanConvMode,DiscontinuousConvMode,DMAContinuousRequests,EOCSelection,NbrOfConversion,ExternalTrigConv,ExternalTrigConvEdge,InjNumberOfConversion,EnableAnalogWatchDog
ADC1.InjNumberOfConversion=0
ADC1.NbrOfConversion=1
ADC1.NbrOfConversionFlag=1
ADC1.Rank-0\#ChannelRegularConversion=1
ADC1.Resolution=ADC_RESOLUTION_12B
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
ADC1.ScanConvMode=DISABLE
ADC1.master=1
CAN1.BS1=CAN_BS1_2TQ
CAN1.BS2=CAN_BS2_7TQ
CAN1.CalculateTimeBit=2000
CAN1.CalculateTimeQuantum=200.0
CAN1.IPParameters=CalculateTimeQuantum,CalculateTimeBit,BS2,Prescaler,SJW,BS1
CAN1.Prescaler=8
CAN1.SJW=CAN_SJW_1TQ
CAN2.BS1=CAN_BS1_2TQ
CAN2.BS2=CAN_BS2_7TQ
CAN2.CalculateTimeBit=2000
CAN2.CalculateTimeQuantum=200.0
CAN2.IPParameters=CalculateTimeQuantum,CalculateTimeBit,BS2,SJW,BS1,Prescaler
CAN2.Prescaler=8
CAN2.SJW=CAN_SJW_1TQ
FREERTOS.FootprintOK=true
FREERTOS.IPParameters=Tasks01,FootprintOK
FREERTOS.Tasks01=MainTask,2,128,MainThread,Default,NULL,Dynamic,NULL,NULL;GasTask,2,128,GasThread,Default,NULL,Dynamic,NULL,NULL
File.Version=6
KeepUserPlacement=false
Mcu.Family=STM32F4
Mcu.IP0=ADC1
Mcu.IP1=CAN1
Mcu.IP10=TIM5
Mcu.IP11=USART1
Mcu.IP2=CAN2
Mcu.IP3=DAC
Mcu.IP4=FREERTOS
Mcu.IP5=NVIC
Mcu.IP6=RCC
Mcu.IP7=SYS
Mcu.IP8=TIM2
Mcu.IP9=TIM4
Mcu.IPNb=12
Mcu.Name=STM32F407V(E-G)Tx
Mcu.Package=LQFP100
Mcu.Pin0=PH0-OSC_IN
Mcu.Pin1=PH1-OSC_OUT
Mcu.Pin10=PC4
Mcu.Pin11=PC5
Mcu.Pin12=PB0
Mcu.Pin13=PB1
Mcu.Pin14=PB2
Mcu.Pin15=PE7
Mcu.Pin16=PE8
Mcu.Pin17=PE10
Mcu.Pin18=PE11
Mcu.Pin19=PE12
Mcu.Pin2=PC0
Mcu.Pin20=PE13
Mcu.Pin21=PE14
Mcu.Pin22=PE15
Mcu.Pin23=PD10
Mcu.Pin24=PD11
Mcu.Pin25=PD12
Mcu.Pin26=PD13
Mcu.Pin27=PA9
Mcu.Pin28=PA10
Mcu.Pin29=PA11
Mcu.Pin3=PA0-WKUP
Mcu.Pin30=PA12
Mcu.Pin31=PB3
Mcu.Pin32=PB5
Mcu.Pin33=PB6
Mcu.Pin34=VP_FREERTOS_VS_ENABLE
Mcu.Pin35=VP_SYS_VS_tim1
Mcu.Pin4=PA2
Mcu.Pin5=PA3
Mcu.Pin6=PA4
Mcu.Pin7=PA5
Mcu.Pin8=PA6
Mcu.Pin9=PA7
Mcu.PinsNb=36
Mcu.UserConstants=
Mcu.UserName=STM32F407VGTx
MxCube.Version=4.23.0
MxDb.Version=DB.4.0.230
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:false\:false\:true
NVIC.CAN1_RX0_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.CAN1_SCE_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.CAN1_TX_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.CAN2_RX0_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.CAN2_SCE_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.CAN2_TX_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:false\:false\:true
NVIC.EXTI0_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:false\:false\:true
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:false\:false\:true
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:false\:false\:true
NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:true\:true
NVIC.TIM1_UP_TIM10_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.TIM6_DAC_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.TimeBase=TIM1_UP_TIM10_IRQn
NVIC.TimeBaseIP=TIM1
NVIC.USART1_IRQn=true\:5\:0\:false\:false\:true\:true\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:false\:false\:true
PA0-WKUP.Locked=true
PA0-WKUP.Signal=GPXTI0
PA10.GPIOParameters=GPIO_Label
PA10.GPIO_Label=DEBUG_RX
PA10.Locked=true
PA10.Mode=Asynchronous
PA10.Signal=USART1_RX
PA11.Locked=true
PA11.Mode=Master
PA11.Signal=CAN1_RX
PA12.Locked=true
PA12.Mode=Master
PA12.Signal=CAN1_TX
PA2.GPIOParameters=GPIO_Label
PA2.GPIO_Label=HB_LPWM
PA2.Locked=true
PA2.Signal=S_TIM5_CH3
PA3.GPIOParameters=GPIO_Label
PA3.GPIO_Label=HB_RPWM
PA3.Locked=true
PA3.Signal=S_TIM5_CH4
PA4.GPIOParameters=GPIO_Label
PA4.GPIO_Label=GAS_PEDAL_MAIN
PA4.Signal=COMP_DAC1_group
PA5.GPIOParameters=GPIO_Label
PA5.GPIO_Label=GAS_PEDAL_SUB
PA5.Signal=COMP_DAC2_group
PA6.GPIOParameters=GPIO_Label
PA6.GPIO_Label=RGB_B_3
PA6.Locked=true
PA6.Signal=GPIO_Output
PA7.GPIOParameters=GPIO_Label
PA7.GPIO_Label=RGB_G_3
PA7.Locked=true
PA7.Signal=GPIO_Output
PA9.GPIOParameters=GPIO_Label
PA9.GPIO_Label=DEBUG_TX
PA9.Locked=true
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PB0.GPIOParameters=GPIO_Label
PB0.GPIO_Label=RGB_G_1
PB0.Locked=true
PB0.Signal=GPIO_Output
PB1.GPIOParameters=GPIO_Label
PB1.GPIO_Label=RGB_R_1
PB1.Locked=true
PB1.Signal=GPIO_Output
PB2.GPIOParameters=GPIO_Label
PB2.GPIO_Label=RGB_B_2
PB2.Locked=true
PB2.Signal=GPIO_Output
PB3.GPIOParameters=GPIO_Label
PB3.GPIO_Label=ST_PWM
PB3.Locked=true
PB3.Signal=S_TIM2_CH2
PB5.Locked=true
PB5.Mode=Slave
PB5.Signal=CAN2_RX
PB6.Locked=true
PB6.Mode=Slave
PB6.Signal=CAN2_TX
PC0.GPIOParameters=GPIO_Label
PC0.GPIO_Label=HB_Current
PC0.Locked=true
PC0.Signal=ADCx_IN10
PC4.GPIOParameters=GPIO_Label
PC4.GPIO_Label=RGB_R_3
PC4.Locked=true
PC4.Signal=GPIO_Output
PC5.GPIOParameters=GPIO_Label
PC5.GPIO_Label=RGB_B_1
PC5.Locked=true
PC5.Signal=GPIO_Output
PCC.Checker=false
PCC.Line=STM32F407/417
PCC.MCU=STM32F407V(E-G)Tx
PCC.PartNumber=STM32F407VGTx
PCC.Seq0=0
PCC.Series=STM32F4
PCC.Temperature=25
PCC.Vdd=3.3
PD10.GPIOParameters=GPIO_Label
PD10.GPIO_Label=HB_REn
PD10.Locked=true
PD10.Signal=GPIO_Output
PD11.GPIOParameters=GPIO_Label
PD11.GPIO_Label=HB_LEn
PD11.Locked=true
PD11.Signal=GPIO_Output
PD12.GPIOParameters=GPIO_PuPd,GPIO_Label
PD12.GPIO_Label=HB_EncA
PD12.GPIO_PuPd=GPIO_PULLUP
PD12.Signal=S_TIM4_CH1
PD13.GPIOParameters=GPIO_PuPd,GPIO_Label
PD13.GPIO_Label=HB_EncB
PD13.GPIO_PuPd=GPIO_PULLUP
PD13.Signal=S_TIM4_CH2
PE10.GPIOParameters=GPIO_Label
PE10.GPIO_Label=GEAR_P
PE10.Locked=true
PE10.Signal=GPIO_Output
PE11.GPIOParameters=GPIO_Label
PE11.GPIO_Label=GEAR_R
PE11.Locked=true
PE11.Signal=GPIO_Output
PE12.GPIOParameters=GPIO_Label
PE12.GPIO_Label=GEAR_N
PE12.Locked=true
PE12.Signal=GPIO_Output
PE13.GPIOParameters=GPIO_Label
PE13.GPIO_Label=GEAR_D
PE13.Locked=true
PE13.Signal=GPIO_Output
PE14.GPIOParameters=GPIO_Label
PE14.GPIO_Label=GEAR_B
PE14.Locked=true
PE14.Signal=GPIO_Output
PE15.GPIOParameters=GPIO_Label
PE15.GPIO_Label=GEAR_C
PE15.Locked=true
PE15.Signal=GPIO_Output
PE7.GPIOParameters=GPIO_Label
PE7.GPIO_Label=RGB_G_2
PE7.Locked=true
PE7.Signal=GPIO_Output
PE8.GPIOParameters=GPIO_Label
PE8.GPIO_Label=RGB_R_2
PE8.Locked=true
PE8.Signal=GPIO_Output
PH0-OSC_IN.Mode=HSE-External-Oscillator
PH0-OSC_IN.Signal=RCC_OSC_IN
PH1-OSC_OUT.Mode=HSE-External-Oscillator
PH1-OSC_OUT.Signal=RCC_OSC_OUT
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=2
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=true
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32F407VGTx
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.17.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x3000
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=false
ProjectManager.LibraryCopy=1
ProjectManager.PreviousToolchain=SW4STM32
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=stmf4discoveryRTOS-SW.ioc
ProjectManager.ProjectName=stmf4discoveryRTOS-SW
ProjectManager.StackSize=0x6000
ProjectManager.TargetToolchain=SW4STM32
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=true
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL,2-SystemClock_Config-RCC-false-HAL,3-MX_DAC_Init-DAC-false-HAL,4-MX_ADC1_Init-ADC1-false-HAL,5-MX_CAN1_Init-CAN1-false-HAL,6-MX_CAN2_Init-CAN2-false-HAL,7-MX_TIM5_Init-TIM5-false-HAL,8-MX_TIM4_Init-TIM4-false-HAL,9-MX_TIM2_Init-TIM2-false-HAL,10-MX_USART1_UART_Init-USART1-false-HAL
RCC.48MHZClocksFreq_Value=45714285.71428572
RCC.AHBFreq_Value=160000000
RCC.APB1CLKDivider=RCC_HCLK_DIV4
RCC.APB1Freq_Value=40000000
RCC.APB1TimFreq_Value=80000000
RCC.APB2CLKDivider=RCC_HCLK_DIV2
RCC.APB2Freq_Value=80000000
RCC.APB2TimFreq_Value=160000000
RCC.CortexFreq_Value=160000000
RCC.EthernetFreq_Value=160000000
RCC.FCLKCortexFreq_Value=160000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=160000000
RCC.HSE_VALUE=25000000
RCC.HSI_VALUE=16000000
RCC.I2SClocksFreq_Value=96000000
RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSE_VALUE,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,PLLSourceVirtual,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
RCC.LSE_VALUE=32768
RCC.LSI_VALUE=32000
RCC.MCO2PinFreq_Value=160000000
RCC.PLLCLKFreq_Value=160000000
RCC.PLLM=25
RCC.PLLN=320
RCC.PLLQ=7
RCC.PLLQCLKFreq_Value=45714285.71428572
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
RCC.RTCFreq_Value=32000
RCC.RTCHSEDivFreq_Value=12500000
RCC.SYSCLKFreq_VALUE=160000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.VCOI2SOutputFreq_Value=192000000
RCC.VCOInputFreq_Value=1000000
RCC.VCOOutputFreq_Value=320000000
RCC.VcooutputI2S=96000000
SH.ADCx_IN10.0=ADC1_IN10,IN10
SH.ADCx_IN10.ConfNb=1
SH.COMP_DAC1_group.0=DAC_OUT1,DAC_OUT1
SH.COMP_DAC1_group.ConfNb=1
SH.COMP_DAC2_group.0=DAC_OUT2,DAC_OUT2
SH.COMP_DAC2_group.ConfNb=1
SH.GPXTI0.0=GPIO_EXTI0
SH.GPXTI0.ConfNb=1
SH.S_TIM2_CH2.0=TIM2_CH2,PWM Generation2 CH2
SH.S_TIM2_CH2.ConfNb=1
SH.S_TIM4_CH1.0=TIM4_CH1,Encoder_Interface
SH.S_TIM4_CH1.ConfNb=1
SH.S_TIM4_CH2.0=TIM4_CH2,Encoder_Interface
SH.S_TIM4_CH2.ConfNb=1
SH.S_TIM5_CH3.0=TIM5_CH3,PWM Generation3 CH3
SH.S_TIM5_CH3.ConfNb=1
SH.S_TIM5_CH4.0=TIM5_CH4,PWM Generation4 CH4
SH.S_TIM5_CH4.ConfNb=1
TIM2.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
TIM2.IPParameters=Channel-PWM Generation2 CH2,Prescaler,Period
TIM2.Period=1600000
TIM2.Prescaler=0
TIM4.CounterMode=TIM_COUNTERMODE_CENTERALIGNED1
TIM4.IC1Polarity=TIM_ICPOLARITY_FALLING
TIM4.IC2Polarity=TIM_ICPOLARITY_FALLING
TIM4.IPParameters=CounterMode,Period,IC1Polarity,IC2Polarity
TIM4.Period=65535
TIM5.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
TIM5.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
TIM5.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4,Period
TIM5.Period=16000
USART1.IPParameters=VirtualMode
USART1.VirtualMode=VM_ASYNC
VP_FREERTOS_VS_ENABLE.Mode=Enabled
VP_FREERTOS_VS_ENABLE.Signal=FREERTOS_VS_ENABLE
VP_SYS_VS_tim1.Mode=TIM1
VP_SYS_VS_tim1.Signal=SYS_VS_tim1
board=STM32F4DISCOVERY
boardIOC=true
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or sign in to comment